62999400 data.pdf

PDF 125 KB Posted

Attached to
SCREW, SELF-LOCKING
Solicitation number
SPMYM227Q1149
Issued by

About this file

This is a Material Ordering Data sheet for fasteners specified under federal procurement standard MIL-DTL-1222J. The document establishes requirements for acquiring countersunk socket head cap screws with the following specifications: 7/8" diameter by 2.75" length, 9UNC-3A thread series and class of fit, NICUAL Grade 500 material in solution annealed and age hardened condition, and Type II configuration with 82-degree countersunk style per ASME B18.3. The part number is M1222SN14C344NCLN, and fasteners must include a self-locking element per MIL-DTL-18240 Type P specification with identification markings "A574" or "STM" per NSTM S9086-CJ-STM-010 Chapter 75 Rev 5.

The fasteners are intended for general, high-temperature, high-strength, and corrosive environment applications requiring high reliability, including elevated temperatures, seawater immersion, salt air/marine environments, high preloads, and high shock loadings. Vendors must provide chemical analysis and mechanical property test results with deliverables. Grade 500 (nickel-copper-aluminum) material shall comply with the Slow Strain Rate Tensile Test of QQ-N-286G dated December 7, 2000. All unit, intermediate, and shipping containers must be marked in accordance with MIL-STD-129. The document was prepared by Donovan Lukas (Code 294V) and references the latest revision of MIL-DTL-1222J dated December 8, 2000, with all cited specifications required at time of award.

View the file

Other files

File Type Posted
62761222 cdrl.pdf PDF
Solicitation - SPMYM227Q11490001.pdf PDF
62761222 data.pdf PDF
62999400 cdrl.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

MATERIAL ORDERING DATA

MIL-DTL-1222

IDN: 4523A 6299-9400

ICN: 38CTB11106 KO: R10 KOI: 002

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-DTL-1222J, GENERAL SPECIFICATION FOR STUDS, BOLTS, SCREWS AND

NUTS FOR APPLICATIONS WHERE A HIGHER DEGREE OF RELIABILITY IS

REQUIRED; dated 08 DEC 2000.

B. Part Number (see 3.14): M1222SN14C344NCLN

1. Configuration, Type, Style, Grade & Condition (see 1.2): Countersunk socket head cap screw type II, NICUAL Grade 500 Solution annealed & age hardened

a. Configuration for socket head cap screws style: Countersunk (82 deg)

(ASME B18.3 para 1.2)

2. Size, Length (for studs, bolts and screws) (see 3.9.2.2): 7/8" diameter X 2.75" long

3. Thread series, and class of fit (see 3.9.1): 9UNC-3A

4. When needed for type IV studs, end configuration shall be (see 3.9.2.2): N/A

5. When a nonstandard fastener is needed, it may be specified on a drawing (see

1.2): N/A

C. The current issue of DoDISS and individual documents is to be cited in the solicitation.

D. When heat treatments do not need to be controlled in accordance with AMS 2750 and MIL-

STD-1684: N/A

E. Type of coating and the minimum coating thickness for all internally-threaded fasteners, all externally-threaded fasteners with class 3A or 5 threads, and those externally-threaded fasteners with class 2A threads that need a thicker coating, when required: N/A

F. When aluminum alloy fasteners are to be coated with an immersion zinc flake/chromate dispersion coating, the coating procedure and thickness requirements shall be provided: N/A

G. When titanium alloy fasteners are to be coated with an inorganic coat: N/A

H. When cut or ground threads are not permitted: Permitted

I. The tread series, when a nonstandard thread series is needed: N/A

J. Bearing surface of the bolt or nut, when a specific bearing surface is needed: N/A

K. Is self locking element required? Yes If yes, specification type/class: MIL-DTL-18240 Type P

L. Identification markings, when a nonstandard identification marking is needed: N/A (Per

NSTM S9086-CJ-STM-010 Chapter 75 Rev 5, para 075-3.2.2.1.1, Level I alloy steel socket head capscrews shall be marked “A574;” marking “STM” is also acceptable.)

6.1 Intended use. Fasteners meeting this specification are intended for general, high temperature, high strength and corrosive environment applications where a high degree of reliability is required. It is designed to be used to acquire commercial off-the-shelf fasteners with added inspections to verify the high degree of reliability required. Fastener types and grades have been selected to meet diverse applications which include: elevated temperatures, immersion in sea water, salt air/marine environments, high preloads and high shock loadings.

MATERIAL ORDERING DATA

MIL-DTL-1222

M. When required the following are to be reported:

1. Examination test results: NO

a. Specify which test type desired (e.g., PT, MT): NA

2. Chemical analysis: YES

3. Mechanical property test results: YES

4. Decarburization test: NO

5. Magnetic permeability test: NO

N-BB: YES

Note to Engineer: If you select “yes”, specify additional requirements in the Additional

Data Requirements section.

Note to Vendor: If anything from sections N-BB applies, it is specified in the Additional

Data Requirements section.

Additional Data Requirements: Grade 500 (nickel-copper-aluminum) material shall comply with the Slow Strain Rate Tensile Test of QQ-N-286G, dated 7 Dec 2000.

All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129.

Prepared By: Donovan Lukas

Code: 294V

File details come from the government source that posted it. Updated .