62921231 data.pdf
PDF 84 KB Posted
- Attached to
- Bar, Metal
- Solicitation number
- SPMYM227Q0181
About this file
This is a Material Ordering Data sheet for titanium and titanium alloy bars and billets.
The document specifies the procurement of titanium bars conforming to ASTM-B348/B348 (Standard Specification for Titanium and Titanium Alloy Bars and Billets, dated 01 NOV 2025). The required grade is GR-2 (UNS R50400) in bar classification with a descaled finish. Mechanical properties must comply with the specification, and marking and commercial packaging must follow MIL-STD-129 standards. Material certificates must explicitly document that iron content is limited to a maximum of 0.20%. Inspection and test reports are mandatory, and all unit intermediate and shipping containers must be marked per MIL-STD-129 with reference to DLA Procurement Note C20 for additional marking instructions. Rejected material will be disposed of per the specification requirements. The ordering data is identified by IDN N4523A 6292-1231, ICN 38CTB56401, KO F16, and KOI 001, and was prepared by Zachary Scofield under Code 260.M. All referenced specifications must be the latest revision at the time of award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 62921231 cdrl.pdf | ||
| SPMYM227Q01810001- Bar SF 30.pdf | ||
| SPMYM227Q0181- Bar - Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-B-348
IDN: N4523A 6292-1231
ICN: 38CTB56401 KO: F16 KOI: 001
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
Paragraph 4 Ordering Data
ASTM-B348/B348, Standard Specification for Titanium and Titanium Alloy Bars and Billets, dated 01 NOV 2025
4.1.1 Grade number from Section 1 and Table 1: GR-2 (UNS R50400)
4.1.2 Classification: BAR
4.1.3 Chemistry: SEE ADDITIONAL DATA REQUIREMENTS.
4.1.4 Mechanical properties are to be per specification
4.1.5 Marking: PER MIL-STD-129
4.1.6 Finish: descaled
4.1.7 Commercial packaging is required: PER MIL-STD-129
4.1.8 Inspection and test reports are required.
4.1.9 Rejected material will be disposed of PER THIS SPECIFICATION.
Additional Data Requirements: MATERIAL CERTIFICATES MUST SHOW IRON CONTENT
IS LIMITED TO 0.20% MAX.
All unit intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Zachary Scofield
Code: 260.M
File details come from the government source that posted it. Updated .