MATERIAL ORDERING DATA - ASTM-B-150.pdf
PDF 98 KB Posted
- Attached to
- BAR, METAL
- Solicitation number
- SPMYM227Q0179
About this file
This is a Material Ordering Data sheet for aluminum bronze rod specifications to be procured for U.S. government agencies.
The procurement requires aluminum bronze rod conforming to ASTM-B-150/B150M (Standard Specification for Aluminum Bronze Rod, Bar, and Shapes), dated 19 January 2026, with copper alloy UNC No. C64200. The material must be supplied in M20 temper (as hot rolled), round cross-section, 4-inch diameter, and 10-foot length. The order quantity is 1 piece per size. The product is purchased for U.S. government agencies. All containers must be marked in accordance with MIL-STD-129 per DLA Procurement Note C20. Mill test reports are required with shipment. Tensile testing is required for alloys with hardness requirements. Certification, residual stress testing, ammonia vapor testing, mercurous nitrate testing, piston finish, and shafting are not required. No additional data requirements apply beyond those specified. The document was prepared by Material and Technical Support (Code 244.4) and references IDN N4523A 6288-7903 and ICN 88MSM00001.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment - SPMYM227Q01790003.pdf | ||
| CDRL 6288-7903.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-B-150
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6288-7903
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 4 Ordering Data
A. ASTM-B-150/B150M, STANDARD SPECIFICATION FOR ALUMINUM BRONZE ROD,
BAR, AND SHAPES, dated 19 JANUARY 2026.
B. Copper alloy UNC No. (see Table 1): C64200
C. Temper (see 7.1): M20 – AS HOT ROLLED
• When Alloy UNS No. C63000 is specified, specify standard strength or high strength temper (see Table 2).
D. Product cross-section (for example round, hexagonal, square, and so forth): ROUND
E. Dimensions (diameter or distance between parallel surfaces and length) and permissible variations (section 10): 4” DIAMETER
• When product of Copper Alloy UNC No. 63020 is specified, the tolerances for diameter, thickness, width, and length shall be part of the contract or purchase order and shall be agreed upon between the supplier and the purchaser.
• Shapes – When product is shapes, the dimensional tolerances shall be as agreed upon between the manufacturer and the purchaser and shall be specified.
F. Quantity: 10 FOOT LENGTH
Total Weight:
Footage:
Number of pieces for each size: 1 EACH
G. The product is being purchased for agencies of the U.S government.
H. If Copper Alloy C61300 material is intended for subsequent welding applications (see Note B, Table 2): N/A
I. Certification: NOT REQUIRED
J. Mill test reports: REQUIRED WITH SHIPMENT
K. Residual stress test IS NOT required.
a. Ammonia Vapor Test or Mercurous Nitrate Test (if required): N/A
b. For Ammonia Vapor Test, pH value other than 10 (if required): N/A
L. Piston finish or shafting IS NOT required.
M. Tensile test IS required for alloys with hardness requirements.
Additional Data Requirements:
N/A
All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Material and Technical Support
Code: 244.4
File details come from the government source that posted it. Updated .