EXHIBIT ADDED DATA.pdf

PDF 180 KB Posted

Attached to
COVERALL, DISPOSABLE
Solicitation number
SPMYM227Q00740002
Issued by

About this file

These are specifications for Flame and Flash Protective Equipment (FME) coveralls across five National Stock Numbers (NSNs): LLS050137 (DOC 6317-7903), LLS048917 (DOC 6317-7904), LLS048919 (DOC 6317-7905), LLS048920 (DOC 6317-7906), and LLS048930 (DOC 6317-7907). The coveralls are one-piece outfits in medium green constructed from a 65% polyester and 35% cotton blend, weighing 5.5 to 8 ounces of preshrunk cotton with a commercial practice twill weave (two up, one down, right or left). All seams must be double seams and completely finished. Hook and pile fastener tape (Velcro or equal) is required for the front closure, pant cuff sealing, sleeve cuff sealing, and pocket top sealing.

The primary differences among the five specifications concern collar specifications: NSN LLS050137 requires a full collar measuring 4-1/2 inches plus or minus ½ inch wide, while the other four NSNs (LLS048917, LLS048919, LLS048920, and LLS048930) specify only "a full collar" without dimensional requirements. All five specifications share identical sizing across five sizes (Medium through XXX-Large) with chest measurements ranging from 46 to 64 inches (tolerance ±1 inch), leg inseams from 30 to 36 inches (tolerance ±½ inch), and sleeve inseams of 20 or 24 inches (tolerance ±½ inch). Each coverall features one front chest pocket on the left side and elastic stirrups with reinforcing box-stitches at pant leg openings. Coveralls must be preshrunk prior to government receipt and labeled with the manufacturer's name and identifying number. A certificate of compliance confirming preshrinking must accompany each shipment.

View the file

Other files

File Type Posted
Solicitation Amendment - SPMYM227Q00740002.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

NSN: LLS050137 DOC: 6317-7903

SPECIFICATION FOR FME COVERALLS

1. Style: 1 piece outfit

2. Color: Medium green

3. Material Blend: 65% Polyester and 35% Cotton.

4. Material Weight: 5.5 to 8 ounce preshrunk cotton.

5. Material Weave: Commercial practice similar to two up, one down, right or left twill.

6. Finish: All seams shall be double seams and completely finished.

7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:

a. The front of the coveralls.

B. Sealing the pant cuffs

c. Sealing the sleeve cuffs

d. Sealing the top of the pocket

8. Collar: A full collar, 4-1/2 inches plus or minus ½ inch wide.

9. Pocket: A Front pocket on left chest, standard size.

NOTE: No other pockets or through holes

10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.

11. Size Dimensions: All dimensions and tolerances are expressed in inches.

Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE

Chest (a) 46 50 54 60 64 +/- 1

Leg Inseam (b) 30 30 32 32 36 +/- ½

Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2

NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.

(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.

(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.

(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.

12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.

13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.

14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.

15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet.

A certificate of compliance shall be submitted for the following requirement with each shipment:

i. Item (13) Special Instructions

NSN: LLS048917 DOC: 6317-7904

2. Color: Medium green

3. Material Blend: 65% Polyester and 35% Cotton.

4. Material Weight: 5.5 to 8 ounce preshrunk cotton.

5. Material Weave: Commercial practice similar to two up, one down, right or left twill.

6. Finish: All seams shall be double seams and completely finished.

7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:

a. The front of the coveralls.

b. Sealing the pant cuffs

c. Sealing the sleeve cuffs

d. Sealing the top of the pocket

8. Collar: A full collar.

10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.

11. Size Dimensions: All dimensions and tolerances are expressed in inches.

Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE

Chest (a) 46 50 54 60 64 +/- 1

Leg Inseam (b) 30 30 32 32 36 +/- ½

Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2

NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.

(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.

(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.

(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.

12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.

13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.

14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.

15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet.

NSN: LLS048919 DOC: 6317-7905

2. Color: Medium green.

3. Material Blend: 65% Polyester and 35% Cotton.

4. Material Weight: 5.5 to 8 ounce preshrunk cotton.

5. Material Weave: Commercial practice similar to two up, one down, right or left twill.

6. Finish: All seams shall be double seams and completely finished.

7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:

a. The front of the coveralls.

b. Sealing the pant cuffs

c. Sealing the sleeve cuffs

d. Sealing the top of the pocket

10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.

11. Size Dimensions: All dimensions and tolerances are expressed in inches.

Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE

Chest (a) 46 50 54 60 64 +/- 1

Leg Inseam (b) 30 30 32 32 36 +/- ½

Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2

NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.

(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.

(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.

(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.

12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.

13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.

14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.

15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet.

NSN: LLS048920 DOC: 6317-7906

2. Color: Medium green.

3. Material Blend: 65% Polyester and 35% Cotton.

4. Material Weight: 5.5 to 8 ounce preshrunk cotton.

5. Material Weave: Commercial practice similar to two up, one down, right or left twill.

6. Finish: All seams shall be double seams and completely finished.

7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:

a. The front of the coveralls.

b. Sealing the pant cuffs

c. Sealing the sleeve cuffs

d. Sealing the top of the pocket

10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.

11. Size Dimensions: All dimensions and tolerances are expressed in inches.

Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE

Chest (a) 46 50 54 60 64 +/- 1

Leg Inseam (b) 30 30 32 32 36 +/- ½

Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2

NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.

(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.

(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.

(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.

12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.

13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.

14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.

15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet.

NSN: LLS048930 DOC: 6317-7907

2. Color: Medium green.

3. Material Blend: 65% Polyester and 35% Cotton.

4. Material Weight: 5.5 to 8 ounce preshrunk cotton.

5. Material Weave: Commercial practice similar to two up, one down, right or left twill.

6. Finish: All seams shall be double seams and completely finished.

7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:

a. The front of the coveralls.

b. Sealing the pant cuffs

c. Sealing the sleeve cuffs

d. Sealing the top of the pocket

NOTE: No other pockets or through holes.

10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.

11. Size Dimensions: All dimensions and tolerances are expressed in inches.

Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE

Chest (a) 46 50 54 60 64 +/- 1

Leg Inseam (b) 30 30 32 32 36 +/- ½

Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2

NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.

(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.

(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.

(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.

12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.

13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.

14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.

15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet.

File details come from the government source that posted it. Updated .