43543850-TECH ORDERING DATA_Redacted.pdf
PDF 322 KB Posted
- Attached to
- STRAIGHTENING PRESS FIXTURES (KIT)
- Solicitation number
- SPMYM225Q0755
About this file
This is a technical drawing and specification document detailing requirements for four Straightening Press Fixtures for the Puget Sound Naval Shipyard in Bremerton, Washington. The document includes conceptual drawings and specifications for fixtures consisting of a Travelling Anvil and Rectangular Stock Fixture components.
The technical specifications require each fixture to withstand 50 tons of downforce, with the Travelling Anvil designed for round stock (1.5-8 inches diameter) featuring replaceable bronze press inserts, wheels, and alignment keys. The Rectangular Stock Fixture must accommodate stock 1/4" to 8 inches thick with simultaneously moving clamping jaws operated by hand screw drive. All components must be labeled with weight in pounds and include specific features like swivel hoist rings for the Anvil and bronze press inserts for both components. This procurement is being conducted as a 100% small business set-aside with responses due by January 16, 2025 at 1 PM PST, using commercial and simplified acquisition procedures for a firm-fixed price contract administered by DLA Land and Maritime.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM225Q0755.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DESCRIPTION
REVISION
REV BY DATE APPROVED
DATESIGNATURECODE
CONCURRENCE
SUPV.
BRANCH
DATESIGNATURE
APPROVAL
BREMERTON, WASHINGTON
PUGET SOUND NAVAL SHIPYARDDEPARTMENT OF THE NAVY
REV.
A
SHEET: OFSCALE: NONE
DWG NO.CAGE CODESIZE
82522
DESCRIPTION
REVISION
REV BY DATE APPROVED
DATESIGNATURECODE
CONCURRENCE
SUPV.
BRANCH
DATESIGNATURE
APPROVAL
BREMERTON, WASHINGTON
PUGET SOUND NAVAL SHIPYARDDEPARTMENT OF THE NAVY
REV.
A
SHEET: OFSCALE: NONE
DWG NO.CAGE CODESIZE
82522
DESCRIPTION
REVISION
REV BY DATE APPROVED
DATESIGNATURECODE
CONCURRENCE
SUPV.
BRANCH
DATESIGNATURE
DESIGNED
DRAWN
CHECKED
APPROVAL
BREMERTON, WASHINGTON
PUGET SOUND NAVAL SHIPYARDDEPARTMENT OF THE NAVY
PRODUCTION ENGINEERING DIVISION, CODE 980
REV.
A
SHEET: OFSCALE: NONE
DWG NO.CAGE CODESIZE
82522
GENERAL TOLERANCES
Under 12 inches +/- 1/16"
12 to 72 inches +/- 1/8"
Over 72 inches +/- 1/4"
Straightening Press Fixtures
911F-1 -
1 5
Conceptual Drawing
10/30/24
12/17/24
REV.
A
SHEET: OFSCALE: NONE
DWG NO.CAGE CODESIZE
82522
B
A
D
C
A C
B D
911F-1 -
GENERAL NOTES
1. This drawing and notes provide conceptual information for design and manufacture of four (4) Straightening Press Fixtures. Each Straightening Press Fixture consists of a Travelling Anvil and a Rectangular Stock Fixture.
2. The manufacturer shall design all components. Each fixture shall be designed to withstand 50 tons of downforce applied to the smallest* workpiece cross-section being supported during straightening operations. * smallest round stock is 1.5 inch diameter, smallest rectangular stock is 0.25 inch thickness.
3. The Travelling "Anvil" will be utilized for straightening round stock. The Anvil shall include replaceable press inserts, these inserts should be bearing bronze. The Anvil shall be outfitted with wheels for ease of positioning. The Anvil should rest directly upon the press table during press operations.
The Anvil shall have a replaceable Alignment Key (bearing bronze). The alignment key shall be 0.990 inch +/- 0.002 inch. The alignment key will sit in the Alignment Groove (1 inch width x 0.563 inch depth) in the press table. The Anvil shall also include drilled and tapped holes to attach swivel hoist rings "SHR" for lifting. Each Anvil shall include 2 SHR's. Each Anvil shall include pins to attach a Rectangular Stock Fixture. Each Anvil shall be labelled with weight in pounds.
4. The Rectangular Stock "Fixture" will be utilized for straightening rectangular stock. The Fixture shall include a replaceable bearing bronze press insert.
The Fixture shall be directly placed upon the anvil for use. The Fixture shall include Clamping "Jaws" to hold the rectangular stock in place. The Jaws shall move simultaneously via hand operated screw drive. Each Fixture shall be labelled with weight in pounds.
2 5
REV.
A
SHEET: OFSCALE: NONE
DWG NO.CAGE CODESIZE
82522
B
A
D
C
A C
B D
911F-1 -
Rectangular Stock Fixture Sized to hold barstock 1/4" - 8 inches thick
3"
9"
Clamp Screw w-Handle
Clamp Screw Clamp Guide
Rectangular Stock, 1/4" thick
Travelling Anvil Sized to hold roundstock 1.5" - 8 inches dia.
Roundbar, 1.5" dia.
Clamping Jaws
5 5
File details come from the government source that posted it. Updated .