43379500 data.pdf
PDF 530 KB Posted
- Attached to
- SHEET METAL Federal contract opportunity
- Solicitation number
- SPMYM225Q0517
About this file
This is a Material Ordering Data specification for copper-alloy plate and sheet metal, consisting of two CLINs (0001 and 0002) under IDN N4523A. The document references ASTM-B-171/171M standard dated April 1, 2009 for pressure vessels, condensers, and heat exchangers.
Both CLINs specify identical requirements for Copper Alloy UNS C71500 sheets weighing 586 lbs each. The material must not be welded or machined, requires no certification, mill test report, special marking, or 0.2 yield offset strength testing. The alloy is not intended for ASME Boiler and Pressure Vessel Code applications. The only differences between the CLINs are their identification numbers (ICN 38VNH53101 vs 38VNH53102) and KOI numbers (008 vs 007). All measurements are to be in inch-pound units.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 25Q0517 SHEET METAL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
IDN: N4523A 4337-9500
ICN: 38VNH53101 KO: S01 KOI: 008
Paragraph 4 Ordering data
Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers, ASTM-B-171/171M, dated 1 April 2009
Applicable Unit is inch-pound.
Copper Alloy UNS number: C71500
Alloy will not be used in applicable where it is to be welded.
Plate is not to be machined.
How tolerance is specified: N/A
Certification is not required.
Weight: 586lbs/sheet
Mill test report is not required.
Special marking is not required.
0.2 yield offset strength is not required.
Alloy will not be used for ASME Boiler and Pressure Vessel Code application.
Additional Data Requirements:
N/A
CLIN 0001
MATERIAL ORDERING DATA
IDN: N4523A 4337-9501
ICN: 38VNH53102 KO: S01 KOI: 007
Paragraph 4 Ordering data
Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers, ASTM-B-171/171M, dated 1 April 2009
Applicable Unit is inch-pound.
Copper Alloy UNS number: C71500
Alloy will not be used in applicable where it is to be welded.
Plate is not to be machined.
How tolerance is specified: N/A
Certification is not required.
Weight: 586lbs/sheet
Mill test report is not required.
Special marking is not required.
0.2 yield offset strength is not required.
Alloy will not be used for ASME Boiler and Pressure Vessel Code application.
Additional Data Requirements:
N/A
CLIN 0002
File details come from the government source that posted it. Updated .