AMENDED SOLICITATION SPMYM223Q0300.pdf

N4523A23213807

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

REVISE CLINS 1-7 TO SHOW BRAND NAME OR EQUAL TO IN DESCRIPTION

ADD BRAND NAME OR EQUAL TO CLAUSE

EXTEND OFFER DUE DATE

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Dec-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X SPMYM223Q0300

X 9B. DATED (SEE ITEM 11)

23-Nov-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

09-Dec-2022

CODE

DLA MARITIME PUGET SOUND

ATTN: JACK EDWARDS

467 W STREET

BREMERTON WA 98312

SPMYM2 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SPMYM223Q0300

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 28-Nov-2022 12:00 PM to 14-Dec-2022 12:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

P/N: 840280-080STR-5.0; RISER STEEL SUB PLATE84"L X 28"W X 7.9"H OVERALL1.25" CENTERS .501" BUSHED HOLES ON 5.0" CENTERSPRECISION GROUND PARALLEL .0005"/40" FOR HAS VF-7MFG:

STEVENS ENGINEERING**SEE ADDED SALIENT CHARACTERISTICS**

To:

P/N: 840280-080STR-5.0 RISER STEEL SUB PLATE84"L X 28"W X 7.9"H OVERALL1.25" CENTERS .501" BUSHED HOLES ON 5.0" CENTERSPRECISION GROUND PARALLEL .0005"/40" FOR HAS VF-7MFG:

STEVENS ENGINEERING**SEE ADDED SALIENT CHARACTERISTICS**BRAND NAME OR EQUAL

TO:MFR: STEVENS ENGINEERINGP/N: 840280-080STR-5.0 Manufacturer's Name:__________________________________________ Brand_______________________________________________________ No:_________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR

EQUALS WITHOUT SPECIFICATIONS WILL BE CONSIDERED AS NON-RESPONSIVE.

CLIN 0002

P/N: IKINSTALLATION KIT INCLUDES: T-NUTS, CAP SCREWS, & CAN OF RUST PREVENTATIVE FOR

USE BETWEEN UNIT & MACHINE TABLEMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

CHARACTERISTICS**

P/N: IKINSTALLATION KIT INCLUDES: T-NUTS, CAP SCREWS, & CAN OF RUST PREVENTATIVE FOR

USE BETWEEN UNIT & MACHINE TABLEMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

CHARACTERISTICS**BRAND NAME OR EQUAL TO:MFR: STEVENS ENGINEERINGP/N: IK

Manufacturer's Name:__________________________________________ Brand_______________________________________________________ No:_________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR

CLIN 0003

P/N: OPTION FALPHANUMERIC ADDRESS MARKING ADDED TO GRID PATTERNMFG: STEVENS

ENGINEERING**SEE ADDED SALIENT CHARACTERISTICS**

P/N: OPTION FALPHANUMERIC ADDRESS MARKING ADDED TO GRID PATTERNMFG: STEVENS

ENGINEERING**SEE ADDED SALIENT CHARACTERISTICS**BRAND NAME OR EQUAL TO:MFR:

STEVENS ENGINEERINGP/N: OPTION F Manufacturer's Name:__________________________________________ Brand_______________________________________________________ No:_________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR

CLIN 0004

P/N: 10126CHIP PLUG- THREADED HOLEMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

P/N: 10126CHIP PLUG- THREADED HOLEMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

CHARACTERISTICS**BRAND NAME OR EQUAL TO:MFR: STEVENS ENGINEERINGP/N: 10126

Manufacturer's Name:__________________________________________ Brand_______________________________________________________ No:_________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR

CLIN 0005

P/N: 20139CHIP PLUG- BUSHED HOLEMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

P/N: 20139CHIP PLUG- BUSHED HOLEMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

CHARACTERISTICS**BRAND NAME OR EQUAL TO:MFR: STEVENS ENGINEERINGP/N: 20139

Manufacturer's Name:__________________________________________ Brand_______________________________________________________ No:_________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR

CLIN 0006

P/N: 10062PRECISION PULL DOWELMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

P/N: 10062PRECISION PULL DOWELMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

CHARACTERISTICS**BRAND NAME OR EQUAL TO:MFR: STEVENS ENGINEERINGP/N: 10062

Manufacturer's Name:__________________________________________ Brand_______________________________________________________ No:_________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR

CLIN 0007

P/N: 20027PULL DOWEL EXTRACTORMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

P/N: 20027PULL DOWEL EXTRACTORMFG: STEVENS ENGINEERING**SEE ADDED SALIENT

CHARACTERISTICS**BRAND NAME OR EQUAL TO:MFR: STEVENS ENGINEERINGP/N: 20027

Manufacturer's Name:__________________________________________ Brand_______________________________________________________ No:_________________________________________________________ NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH SPECIFICATIONS FOR EVALUATION. BIDS RECEIVED FOR

The following have been added by full text:

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must--

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by--

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

(End of Summary of Changes)