2098-1200-TECH ORDERING DATA MIL-C-24723.docx
DOCX document 33 KB Posted
- Attached to
- SPHERICAL BEARING Federal contract opportunity
- Solicitation number
- SPMYM222Q1735
About this file
This document provides material ordering data for castings to be procured in accordance with specification MIL-C-24723. Key details include:
The ordering data specifies that two castings are required with the shape and dimensions according to the provided drawing. The castings must be M-30H alloy and undergo centrifugal casting. Radiographic inspection is required per T9074-AS-GIB-010/271 (with ACN-1) on 100% of the bearing(s) unless otherwise specified, and the test report and film must be provided prior to shipment. Additional requirements include permanent marking and Level C packaging.
The related federal contract opportunity is solicitation number SPMYM222Q1735 for procurement of spherical bearings to be manufactured in accordance with material specifications. The solicitation will be issued unrestricted using commercial procedures, with delivery to Bremerton, WA. All questions must be submitted by email, and offerors are responsible for monitoring the site for amendments.
View the file
Other files for this federal contract opportunity
Show all 50
SPHERICAL BEARING has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-C-24723
IDN: N4523A 2098-1200
ICN: 38CTB56602 KO: R02 KOI: 001
Paragraph 6.2 Ordering Data
| a. | MIL-C-24723, Castings, Nickel-Copper Alloy, dated 07 Jun 1989 |
| b. | Quantity of castings required: 2 |
| c. | Shape and dimensions of casting to be supplied as specified by drawing, pattern, or sample: IAW Provided Drawing |
| d. | Composition required: M-30H |
| e. | Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced: LATEST |
| f. | When first article inspection is required: No |
| g. | If centrifugal or static casting is required: Centrifugal |
| h. | If more than hardness is to be tested on M-25S: NA |
| i. | Applicable standards, if other than MIL-STD-248 and MIL-STD-278: VT, PT, RT Required. Radiographic inspection (RT) shall be performed per T9074-AS-GIB-010/271 (with ACN-1). Acceptance criteria for RT shall be per Table XXXVI of MIL-STD-1689A, Criticality Level 1, for a casting thickness of 1 inch and less. RT shall cover 100% of the bearing(s) unless otherwise specified by applicable Shooting Sketch. Test report and film shall be forwarded prior to hardware shipment. Government to verify format, content, and media. Hardware will not be shipped until the government accepts the report and film. |
| j. | Requirements for mechanical properties test for first article inspection: NA |
| k. | Whether attached test bars are required: No |
| l. | Sampling plan when 100 percent inspection is not required: 100% Inspection is Required. |
| m. | If castings are not to be inspected for soundness: NA |
| n. | Level of packaging required: Level C |
| o. | Special marking required: Shall be legibly and permanently marked "RT AND PT" IAW GN 5555 and IAW FED-STD-182 per 3.8 of MIL-C-24723. |
Additional requirements: NA
Prepared By: Ben Knowles Code: 260V
File details come from the government source that posted it. Updated .