ORDERING_DATA.pdf

ADDITIONAL ORDERING DATA SHEET

INFLATABLE PLUGS

SALIENT CHARACTERISTICS:

Shop 31 Corporate Standard Tooling requires Inflatable bladder plugs with the following characteristics:

Inflatable bladder plug and cover manufactured by COB Industries, Inc.

* natural rubber bladder with round bulbous end, inflatable to max PSI proportionate to size on chart DWG: 820-7584557 Rev B, sht: 5A. Stamped with cure date and size. Minimal talcum powder applied to fully assembled bladder

* rubber neck extending from bulbous end approximately 25” with a Schrader valve (with cap) crimped or secured with a hose clamp at attachment point; 1/8” NPT valve stem. Minimal plumber’s putty at brass fitting area of valve, no Teflon tape.

* canvas/polyester bag stamped with the following information - warning test before use, max inflation pressure __ psi, cure date and size.

* Free of following defects: crevices/dimples/holes/cracks on the Natural Rubber bladder, damaged cloth, unraveled threads, tears or rips, presence of oil on any surface

* Materials meet requirements of NAVSEA TM 0989-064-3000, pass testing for detrimental materials (done in house)

* manufacturer provided “Warning Tag” (Read Instruction Manual and Test Bag before each use), 1 ea per plug; inflation max noted on tag per each size

* white grosgrain tether 16” long x ½” wide, unattached

* received unassembled; one bladder, one canvas cloth cover, one tether constitutes one part

Part Numbers

BB102.5-SF = 2.5” bladder CC102.5-SF = 2.5” cloth cover

BB103-SF = 3.0” bladder CC103-SF = 3.0” cloth cover

BB104-SF = 4.0” bladder CC104-SF = 4.0” cloth cover

BB106-SF = 6.0” bladder CC106-SF = 6.0” cloth cover

BB108-SF = 8.0” bladder CC108-SF = 8.0” cloth cover

BB110-SF = 10.0” bladder CC110-SF = 10.0” cloth cover

BB112-SF = 12.0” bladder CC112-SF = 12.0” cloth cover

BB114-SF = 14.0” bladder CC114-SF = 14.0” cloth cover

BB116-SF = 16.0” bladder CC116-SF = 16.0” cloth cover

BB118-SF = 18.0” bladder CC118-SF = 18.0” cloth cover

BB120-SF = 20.0” bladder CC120-SF = 20.0” cloth cover