Salient_Characteristics..docx

Salient characteristics

Office Furniture

· Item 1 Quantity: 1 EA Description: extended desktop left hand corner surface L- shape, size 53.5'' on short side x 71.5'' on long side, width is 23.5” at both ends with an increase to 34.5” at the apex of the angle. Desktop has only one support leg at back part of the angle and 2ea at the long end, desk top work surface should be approximately 1 ¼” thick made synthetic laminate, trim (edge) should be a propylene edge band with a 1" corner radius. This extended desktop left hand corner surface L- shape design allows for maximum usage of desk top space by personnel in the sitting position and versatility regarding underneath wall outlet access points (no structural side walls). Legs should connect to the desk by ¼-20 machine screws threaded into brass inserts for assembly / disassembly durability purposes. Legs should have a cast aluminum foot is mechanically secured to the leg tube. Foot should have a leveling glide that is threaded into the foot, level adjustment ¾" height or greater. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining.

· Item 2 Quantity: 1 EA Description: extended desktop right hand corner surface L- shape, size 53.5'' on short side x 71.5'' on long side, width is 23.5” at both ends with an increase to 34.5” at the apex of the angle. Desktop has only one support leg at back part of the angle and 2ea at the long end, desk top work surface is 1 ¼” thick synthetic laminate, trim (edge) should be a propylene edge band with a 1" corner radius. This extended desktop right hand corner surface L- shape design allows for maximum usage of desk top space by personnel in the sitting position and versatility regarding underneath wall outlet access points (no structural side walls). Legs should connect to the desk by ¼-20 machine screws threaded into brass inserts for assembly / disassembly durability purposes. Legs should have a cast aluminum foot is mechanically secured to the leg tube. Foot should have a leveling glide that is threaded into the foot, level adjustment ¾" height or greater. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining.

· Item 3 Quantity: 1 EA Description: desktop surface rectangular size, 23.5''deep x 65.5''wide, work surface is 1 ¼” thick synthetic laminate, trim (edge) should be a propylene edge band with a 1" corner radius. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining.

· Item 4 Quantity: 2 EA Description: 4drawer storage cabinet, size 20''D x 30''W x 54''H, storage cabinet material should be 3/4” thick. Drawer dimensions should be 13” x 30” Drawer bodies should be constructed of 16-gauge cold rolled steel side walls, ½” thick wood composite board bottom and back for rigidity with 180lb load ball bearing suspensions (BIFMA tested to 40,000 cycles). Shall come equipped with lateral rail filing kit (optimize full drawer volume with side-to-side filing). Lateral rail should be ⅛ x 1” hardened aluminum. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining for drawer faces and charcoal for the cabinet. Drawer cabinet should be lockable with single key access to each unit. Lock should be a double engagement system.

· Item 6 Quantity: 1 EA Description: 3door storage cabinet, left hand, size 20''D x 45''W x 26''H, storage cabinet material should be 3/4” thick. Storage door dimensions should be 1 pair 2ea 15” W x 26” H and 1ea at same dimensions. Storage cabinet should have 1ea adjustable shelf each side. With optional cutout for cable pass through. Cabinet should be lockable with single key access to each unit. Lock should be a double engagement system. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining for drawer faces and charcoal for the cabinet.

· Item 7 Quantity: 1 EA Description: 3drawer pencil box file, pedestal, size 24''D x 15''W x 26''H, on casters, storage cabinet material should be 3/4” thick. Drawer dimensions should be 1ea 3 ½” pencil drawer, 1ea 6 1/3” box drawer, 1ea file drawer 12 ¾” with equipped with lateral rail filing kit (optimize full drawer volume with side-to-side filing). Lateral rail should be ⅛ x 1” hardened aluminum. Drawer bodies should be constructed of 16-gauge cold rolled steel side walls, ½” thick wood composite board bottom and back for rigidity with 180lb load ball bearing suspensions (BIFMA tested to 40,000 cycles). Drawer cabinet should be lockable with single key access to each unit. Lock should be a double engagement system. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining for drawer faces and charcoal for the cabinet.

· Item 8 Quantity: 1 EA Description: Storage cabinet combination (wardrobe, pedestal, shelf) left hand, size 24''D x 24''W x 42''H. Drawer dimensions should be 12in and 2ea 6in. Should have a 42” high wardrobe coat storage with mounted hooks, attached lockable door should be 42” H x 9” W hinged on right side. Drawer bodies should be constructed of 16-gauge cold rolled steel side walls, ½” thick wood composite board bottom and back for rigidity with 180lb load ball bearing suspensions (BIFMA tested to 40,000 cycles). Cabinet should be lockable with single key access to each unit. Lock should be a double engagement system. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining for drawer faces and charcoal for the cabinet. Cabinets need to be constructed in way to fit both L shape work surfaces, with mounting brackets (mounting plates). The mounting plate should be formed from 12 gauge, cold rolled sheet steel that is welded from the top, hiding the weld for a cleaner appearance and stronger seam.

· Item 9 Quantity: 1 EA Description: Storage cabinet combination (wardrobe, pedestal, shelf) right hand, size 24''D x 24''W x 42''H. Drawer dimensions should be 12in and 2ea 6in. Should have a 42” high wardrobe coat storage with mounted hooks, attached lockable door should be 42” H x 9” W hinged on left side. Drawer bodies should be constructed of 16-gauge cold rolled steel side walls, ½” thick wood composite board bottom and back for rigidity with 180lb load ball bearing suspensions (BIFMA tested to 40,000 cycles). Cabinet should be lockable with single key access to each unit. Lock should be a double engagement system. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining for drawer faces and charcoal for the cabinet. Cabinets need to be constructed in way to fit both L shape work surfaces, with mounting brackets (mounting plates). The mounting plate should be formed from 12 gauge, cold rolled sheet steel that is welded from the top, hiding the weld for a cleaner appearance and stronger seam.

· Item 10 Quantity: 1 EA Description: Desktop surface rectangular, size 23.5''deep x 50.5''wide, work surface is 1 ¼” thick synthetic laminate, trim (edge) should be a propylene edge band with a 1" corner radius. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining. This piece fits with the two L shape desk surfaces (items 1 and 2) they form the u shape desk surface and specifically fit the office space dimensions. 193.5 inches total from corner to corner.

Quantity: 4 EA Description: post leg with extended top plate for shared surface support. Triangular steel tube shape powder coated black. This would be for items; 1, 2 and 10 surface area. Legs should be welded, cold rolled steel, 14gauge material at .083" thick. The mounting plate is formed from 12gauge material, cold rolled sheet steel that is welded from the top, hiding the weld for a cleaner appearance and stronger seam.

Quantity: 2EA Description: Triangular steel tube shape powder coated black. Legs should be welded, cold rolled steel, 14gauge material at .083" thick This would be for items; 1, 2 corners. Note: All Legs should have a cast aluminum foot is mechanically secured to the leg tube. Foot should have a leveling glide that is threaded into the foot, level adjustment ¾" height or greater.

Quantity: 4 EA Description: Flip table, rectangle, full base with casters, size 30''D x 60''W x 28.5''H. Tables should be constructed by a welded steel base design with an cable drop inside leg. Tables shall have a steel tilting mechanism. Tilting mechanism should be built for high volume use, equipped with a roller bearing lock. Needed for storage then to usage. Table legs shall have casters for ease of movement. Casters shall be lockable. Color should be a vertical grain bamboo laminate design in charcoal gray tones with black graining. Flipping tables are needed to be stored. This can be accomplished due to flip feature and easily moved from storage to usage location with mounted casters. Flip feature functions from a center pivot.

Table should be constructed with an optional cut-out for cable passage open or closed with metal grommet.

· Notes:

The assemble dimension of the desk top surface work area u shape long end is at 193.5 total inches of useable space. This is also for specific fitment of office area foot print.

Door and drawer pull handles should be silver color.

All drawers should have heavy duty slide mechanisms.

Desk top material should be manufactured with no added formaldehyde if possible.