TDP-0031Ll.pdf

LSN: lH 4710-PS-'l'DP-0031Ll

ITEM NAME: PIPE

DOCUMENT NUMBER: 8003-1213

1. SCOPE

TECHNICAL DATA PACKAGE VERSION 001

January 24, 2018

PAGE l

1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material.

2. APP DOCS

2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.

2.2 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.2.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

DOCUMENT REFERENCES

SPEC NO. SLASH NO.

ANSI/ASQ Zl.4 0

ANSI/NCSL Z540.3 0

ASTM-B444 0

ASTM-B829 0

ISO-9002 0

ISO-9001 0

ISO-10012 0

ISO-9001 0

ISO-9001 0

MIL-T-16420 0

MIL-I-45208 0

MIL-STD-45662 0

MIL-STD-792 0

SAE AMS 2806 0

SAE AMS 2807 0

SAE AMS 2809 0

SAE AMS-STD-185 0

T9047-AS-GIB-010/271 0

3 . REQUIREMENTS

PART NO. REV

0 A

0 K

0 A

0 A

0 F

0 C

0 B

0 A

0 A

0 1

DATE

01/01/2008

03/26/2013

06/01/2016

01/01/2017

07/01/1994

07/01/1994

04/15/2003

12/15/2000

11/15/2008

09/16/1988

07/24/1981

08/01/1988

05/19/2006

03/01/2008

09/01/2000

08/01/2011

08/01/2007

09/11/2014

DISTR CD

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

AMEND CHD NTC

3.1 Manufacture and Design - The item furnished under this Contract/Purchase order shall meet the requirements as specified in ASTM-B444, except as amplified or modified herein. ASTM-B444 Ordering Data information is provided below:

A) Alloy name or UNS number: N06625 B) ASTM designation: B444 C) Condition (temper): Grade 1 - Annealed D) Finish: Cold-drawn, annealed or solution annealed and pickled (not ground) E) Dimensions:

Tube--Specify outside diameter and nominal or minimum wall: N/A Pipe-Specify standard pipe size and schedule: 5" NPS, Schedule 10 Length-Cut to length or random: Cut to length

SUPP