SPMYM2-23-Q-1791 (SALIENT CHARACTERISTICS) SYSTEM HP WATERJET.pdf

PDF 420 KB Posted

Attached to
SYSTEM HP WATERJET Federal contract opportunity
Solicitation number
SPMYM2-23-Q-1791
Issued by
Defense Logistics Agency Land and Maritime

About this file

This document outlines the technical specifications for a high pressure water jetting system solicited by the Defense Logistics Agency Land and Maritime under solicitation number SPMYM2-23-Q-1791. Key requirements for the system include a maximum pressure rating of 10,000 PSI, a flow rate of 6.1 GPM, manual pressure control, a rupture disc rated for 11,000 PSI, dimensions of approximately 48" tall x 45" wide x 34" deep to allow portability, NPT fittings for hoses and gauges, a standard motor control cabinet in place of a variable frequency drive, a 50HP motor rated for 480V 3-phase 60Hz power, and a 10 micron inlet filter.

View the file

Other files for this federal contract opportunity

Other files attached to SYSTEM HP WATERJET, newest first.
File Type Posted
SPMYM2-23-Q-1791 (SOLICITATION) SYSTEM HP WATERJET.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Doc #: 31863765

SALIENTS

High Pressure Water

Jetting System

-High Pressure Water Jetting System

* Rated for 10K PSI

* Rated for 6.1 GPM, with 0.63” Plungers

* Manual Pressure Control Valve

* Rupture Disc for 11K PSI (Relief Valve will suffice if Rupture Disc not feasible)

* Dimensions of the system to be approximately: 48” Tall x 45” Wide x 34” Deep to allow for being portable and allowing system to fit down into the engineering spaces of a Naval Vessel.

* Equipped for ½” NPT outlet for Aeroquip quick connects for Hoses along with Aeroquip quick connects for pressure gauge and relief valve.

* Standard Motor Control Cabinet (MCC) to be installed in lieu of the Variable Frequency Drive (VFD) and a Fused Knife Disconnect installed on the unit.

* 50HP AOL Starter, 380, 460VAC/3PH

* 10 Micron Filter installed on the water side.

* 50 HP Motor, 480V, 3 Phase, 60Hz, 59.2 Amp

File details come from the government source that posted it. Updated .