SPMYM2-22-Q-2273 (SALIENT CHARACTERISTICS) PRINTER - KIT EDGE HOLDER.pdf

PDF 61 KB Posted

Attached to
PRINTER & KIT EDGE HOLDER Federal contract opportunity
Solicitation number
SPMYM2-22-Q-2273
Issued by
Defense Logistics Agency Land and Maritime

View the file

Other files for this federal contract opportunity

Other files attached to PRINTER & KIT EDGE HOLDER, newest first.
File Type Posted
SPMYM2-22-Q-2273 (SOLICITATION) PRINTER - KIT EDGE HOLDER.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SALIENT CHARACTERISTICS FOR PRINTER & KIT EDGE HOLDER

HP R1000 PLUS LATEX PRINTER WITH LATEX R SERIES EDGE HOLDERS KIT

� The printer shall have a resolution up to 1200 x 1200 dpi.

� The printer shall use water‐based latex inks.

� The printer shall utilize 3 liter size ink cartridges: 9 (cyan, magenta, yellow, black, light cyan, light magenta, HP Latex Optimizer, HP Latex Overcoat, white).

� The printer shall utilize 7 speed modes of printing with the highest mode to be 603 ft²/hr ‐ Outdoor (3p 70%).

� The printer shall utilize 8 print heads: (cyan/black, magenta/yellow, light cyan/light magenta, HP Latex Overcoat, 2 HP Latex Optimizer, 2 white).

� Media roll diameter NTE 150 lbs, 64”wide and 9.8” in diameter up to 2.00” media thickness.

� The printer shall be capable of printing on the following materials: Rigid substrates: paper foamboard, plastic foam‐board, PVC foam, plastic corrugated, acrylic, polycarbonate, polystyrene, compressed cardboard, corrugated board, honeycomb board, aluminum composite panel, wood, glass, ceramic; Roll substrates: PVC banner, self‐adhesive vinyl, coated paper, polypropylene, polystyrene, polycarbonate, polyester, textile (non‐porous), canvas and leather.

� The printer will utilize the above substrates for the following applications: Signage: indoor, flat, backlit, thermoformed; Decoration: wall coverings, window decoration; Vehicle.

� Decoration: fleet graphics, wraps, decals; Textile: soft signage, frontlit, backlit; POS and Packaging: corrugated displays, short‐run customized packaging, prototyping.

� The printer shall have dimensions of 166” x 80” x 69” (printer); 166” x 143” x 69” (including standard input and output tables). Shipping container not to exceed 174 x 88 x 85”.

� The printer shall be capable of operating at temperatures of 59 to 86 degrees in relative humidity 20 to 70% RH (non‐condensing).

� The printer shall utilize input electrical of 200‐240 volts AC, 3‐phase service.

� Weight of printer as installed shall not exceed 3086 lbs (5291 lbs. shipped).

� Printer shall be UL or CSA listed.

File details come from the government source that posted it. Updated .