SPMYM2-21-Q-2250 (SALIENT CHARACTERISTICS) SAFAN DARLEY M-SHEAR 310-4 TS200.pdf

Salient Characteristics Safan Darley M-Shear (Hybrid-Servo Drive)

Model M310-4 Project #047-310 Tracking #S31317A0117

SafanDarley Part Numbers Highlighted Yellow

1. Safan-Darley M-Shear M310-4TS200 Hybrid servo-drive, hydraulic guillotine shear(4.0.0431); 3100mm(122”) cut length, 4mm(0.157”) thick shearing capacity. TS200 Touch Screen controller: Programmable for automatic clearance and blade-gap adjustment, strokes per minute, back gauge operations, cutting angle, adjustable starting and end-stopping position for the cutting beam.

2. Foundation mounts reviewed and approved by Naval Facilities Engineering: Airloc 4.17.4 dampening plate(4.9.1050) and anchoring hardware(4.9.1100); specified as Option V Version I of machine installation manual Book 3, Item W.

3. Safety light finger guard (4.1.2100) with barricade ledge to prevent operator access behind light barrier.

4. Configured for 480V electrical connection/transformer (4.1.1200), electrical cabinet (USA Only) (4.1.9583), with chiller (4.1.9560).

5. Pneumatic sheet support device (4.5.5250) with “Return-to-Sender” feature and continuous sheet support during cutting (8 arms).

6. Scrap discharge (4.5.4120), small product and scrap sorting system, including product bin under table.

7. Adaption to the shear for front sliding rails for movable front sheet support arms (4.4.3311).

8. Squaring guide (4.3.1200), left-hand side with hardened insert provided with support arm, imperial ruler (4.4.0080) and support. Length= 2050mm (81”).

9. Torsion-free clamping support bars (4.9.9991). Qty= 1 each.

10. Adjustable angle guide (4.3.8050) with degree distribution, 4 x 90deg. Qty= 1each.

11. “Fine Adjustable” flip-stops (4.4.5300) for front support arms and (4.3.5030) for left-side squaring arm.

12. Custom painted red (4.0.7120), RAL Code 3020, in lieu of lime green (4.0.7140).

13. Pneumatic hinging back gauge (4.5.7150).

14. Hard copy of operation/installation/maintenance manual Qty=3 each.

15. Safety Requirement - The equipment and its component parts shall be in compliance with applicable CFR 29, Part 1910 Regulation and Standards. By definition, any equipment will be deemed acceptable and approved by PSNS&IMF if it meets specific OSHA conditions outlined in OSHA Part 1910; Subparts "O" and "S". Specifically, equipment will be "Accepted" by PSNS&IMF if it has been inspected and found by a Nationally Recognized Testing Laboratory (NRTL) to conform to specified plans or procedures of applicable codes. The equipment (as a whole system) shall be Nationally Recognized Testing Laboratory (NRTL) inspected and certified (by an OSHA authorized third party). An NRTL certification report shall be provided. If the equipment type/model has already been NRTL inspected and certified, a certification report or documentation mounted on the equipment (which acknowledges it is NRTL certified) shall be provided.

Standard Features Include:

• Operating decibels: machine on: 0dB/actively cutting: 75-84dB.

• Strokes per Minute: up to 90.

• Blade with 4 cutting edges, suitable for shearing stainless steel tensile strength of

54.4T/in^2.

• Adjustable starting and end stopping position for the entire length of the cutting beam.

• Push-on adiprene covers for the adjustable hold down cylinders.

• Cutting line lighting with a cutting line indicator.

• 2 Spring-action stops for the front support arms.

• 2 Support arms, 1200mm in length.

• CNC controlled backgauge, with automatic retraction for narrow strip widths and fine adjustment of the backgauge parallelism. Supports for backgauge equipped with ball screws and play-free linear guides.

• Automatic retraction of the backgauge for narrow strip widths.

• Specially milled surface bed plate to allow for the movement of sheet metal on table bed.

With T-slots, hand slots, imbedded imperial rulers, and squaring guides on left and right side.