SPMYM2-21-Q-1446 (SALIENT CHARACTERISTICS) AIR HOISTS.pdf
PDF 413 KB Posted
- Attached to
- AIR HOISTS
- Solicitation number
- SPMYM2-21-Q-1446
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM2-21-Q-1446 (SOLICITATION) AIR HOISTS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for 6 ton air hoists, JML 11100157
-Each hoist must be permanently marked with identifying OEM name/trademark and working limit
-Hoists must meet the standards of ASME B30.16 and the ASME
Performance Standard for Air Chain Hoists-HST-5-1999.
-Air hoists must have a 6 metric ton (13,860 lbs.) working load limit
-Air hoists must have a 60’ load chain lift
-Air hoists must include overload protection
-Must have a top hook mount
-Must have a 4 bar/60 PSI air pressure system
-Air hoists must be made to operate oil-free. Hoists must have permanent motor lubrication during operation, no additional motor lubrication required, besides grease.
-load chains and hooks must be made from tempered steel with a 5 to
1 breaking strength.
-Must have 60’ rope controls for operation
-Chain must have two strands; dimension of chain must be 13 mm X 36 mm
-The maximum width of air hoist body cannot exceed 9.5”
-When the hoist is ran all the way up it must not exceed 26.5” from top hook to bottom hook (minimum headroom)
File details come from the government source that posted it. Updated .