SPM8E314R0009_Amendment_3.pdf

OMB Approval 2700-0042

1. CONTRACT ID CODE PAGE OF PAGES

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 1

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

0003 May 6, 2014 IQC13304009013

6. ISSUED BY CODE SPM8E3 7. ADMINISTERED BY (If other than Item 6) CODE SPM8E3 DLA Troop Support 700 Robbins Avenue Philadelphia, PA 19111 POC: Mark Tanguay

8. NAME AND ADDRESS OF CONTRACTOR (No. Street, county, State and ZIP: Code) () 9A. AMENDMENT OF SOLICITATION NO.

X SPM8E3-14-R-0009

9B. DATED (SEE ITEM 11)

03/31/2014

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning one (1) copy of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATA SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and data specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

() A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET

FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return ____ copy to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

SOLICITATION SPM8E3-14-R-0009 (MRO TLS PV ALASKA REGION) IS HEREBY AMENDED AS

FOLLOWS:

Reference Attachment 1 (TAB 1) Price Proposal Spreadsheet, Price Evaluation List (PEL), in order to include formulas omitted from several locked cells in columns L, Q, and V, the revised PEL is attached.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Tracey L. Brown Contracting Officer

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

(Signature of person authorized to sign)

BY _____________________________________________

(Signature of Contracting Officer)

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)

PREVIOUS EDITION UNUSABLE Computer Generated Prescribed by GSA

FAR (48 CFR) 53.24

TAB 1-Price Evaluation List

Price Evaluation List - ALASKA

PRICING PERIOD 1 (24 Months) PRICING PERIOD 2 (18 Months) PRICING PERIOD 3 (18 Months)

001 3M 5635K Cold Shrink QT-II Termination Kit 3M™, 5 to 15 kV, 0.84-1.33 in (21-34 mm) Cable Insulation O.D. 24 EA 18 EA 18 EA

002 3M 72-N3 3M™ Scotchcast™ Inline Splice Kit 72-N3, Cable O.D. Range 0.625–1.50 in (15,9–38,1 mm), 10 per case 10 EA 8 EA 8 EA

003 3M 8983-07 RIGID BODY CLOSURE KIT W/4407 COMPOUND 10 EA 8 EA 8 EA

004 3M 1196 6 in. DYNA-COUPLER W/POUCH 1 EA 1 EA 1 EA

005 3M 80-6113-1618-5 1185 BATTERY PACK NIHM FOR 965 AMS SERIES /// Battery Pack NIMH 1185 for 965AMS Series testers. 2 EA 2 EA 2 EA

006 ADB AIRFIELD SOLUTIONS IRCL-111110 L-850A IN PAVEMENT RUNWAY CENTERLINE WHITE/WHITE 120 EA 90 EA 90 EA

007 ADB AIRFIELD SOLUTIONS TDZL-21110 L-850B LED TOUCHDOWN TOE-IN RIGHT 90 EA 68 EA 68 EA

008 ADB AIRFIELD SOLUTIONS 44A6247-1121 L-850D STYLE 2 THRESHOLD AND RUNWAY END LIGHT BI-DIRECTIONAL, GREEN STRAIGHT, RED STRAIGHT, ONE CORD SET 50 EA 38 EA 38 EA

009 ADB AIRFIELD SOLUTIONS 48A0091 300W-20A Q20/PAR 56, ELEVATED APPROACH LAMP, AIRPORT LIGHTING, HALOGEN, 20 AMP, 300 WATT, PAR 56 MEDIUM SHATTER SHIELD COATED FLOOD LENS, MOGUL END PRONG CONNECTIONS, FAA APPROVED 25 EA 19 EA 19 EA

010 ADB AIRFIELD SOLUTIONS 35C0081 L-830-5 ISOL TX 100W 20A/606A 50 EA 37 EA 37 EA

011 ALLIED STEEL 103101 2" RIGID CONDUIT 10' L 500 EA 375 FT 375 FT

012 ALLIED STEEL 746057 3/4 in. GALVANIZED RIGID CONDUIT (GRC) 10' L (PRICE PER FT) 1,000 FT 750 FT 750 FT

013 ALLIED STEEL 848532 2 in. (EMT) STEEL THINWALL COND 10' L (PRICE PER FT) 1,000 FT 750 FT 750 FT

014 ALLIED STEEL 869609 Conduit, EMT, 3/4In, 5Ft, Steel (PRICE PER FT) 1,000 FT 750 FT 750 FT

015 STANLEY SECURITY SOLUTIONS/HCM 1C6E2-626 Standard Keyed Core 100 EA 75 EA 75 EA

016 CROUSE HINDS MHUB6 CONDUIT HUB, 2", MALLEABLE IRON 50 EA 37 EA 37 EA

017 ADB AIRFIELD SOLUTIONS 44A2071-1151 L-862 Q 120W C/C 24 in. OAH 2 in. FRANGILBE 50 EA 37 EA 37 EA

018 ADB AIRFIELD SOLUTIONS ETEL/1512 L-861T LED BLUE 24 in. OAH 2 in. COUPLING TAXIWAY EDGE 50 EA 37 EA 37 EA

019 ADB AIRFIELD SOLUTIONS 44A6248-4210 L-850E STYLE 2 THRESHOLD UNIDIRECTIONAL GREEN 50 EA 37 EA 37 EA

020 ANNIN FLAGMAKERS 743255 FLAG POLE, GROUND MOUNT, 25 FT, ALUMINUM 6 EA 5 EA 5 EA

021 ANVIL B300CAPK 2 BLK MI 300# CAP 15 EA 11 EA 11 EA

022 ANVIL BSSPG 1 BLK STL SQ HD PLUG 15 EA 11 EA 11 EA

023 ANVIL BSSPF 3/4 BLK STL SQ HD PLUG 15 EA 11 EA 11 EA

024 ANVIL BSSPD 1/2 BLK STL SQ HD PLUG 15 EA 11 EA 11 EA

025 ARMSTRONG PUMPS 570109-382 CBV-10FS ARMSTRONG 10 IN. FLANGE WATER AND STEAM CIRCUIT BALANCING VALVE, FLANGED-STRAIGHT 3 EA 2 EA 2 EA

026 ARMSTRONG PUMPS 570109-378 CBV-4FS ARMSTRONG 4 IN. FLANGE WATER AND STEAM CIRCUIT BALANCING VALVE, FLANGED-STRAIGHT 13 EA 10 EA 10 EA

027 ARMSTRONG PUMPS 570109-380 CBV-6FS ARMSTRONG 6 IN. FLANGE WATER AND STEAM CIRCUIT BALANCING VALVE, FLANGED-STRAIGHT 2 EA 2 EA 2 EA

028 ARROW FASTENERS 257 T-25 7/16 in. ROUND CROWN WIDTH 5/16 in. WIRE STAPLES 1000 PER PACK 10 EA 8 EA 8 EA

029 AUTOMATIC LIGHTNING PROTECTION RSP13 Rod is 12” x 3/8” dia. This can be used on any flat surface with any degree pitch and the lightning rod can be adjusted with the swivel. Especially useful on rubber roofs, metal roofs or any roof you do not want to penetrate the surface with screws or nails. These are adhesive glue down bases. Apply the #UC Adhesive liberally to the base and put in place. Allow this to cure for 12 to 24 hours before connecting cable to it. The adhesive will cure faster under wet or more moist conditions. This adhesive will have a rubbery texture like silicone caulk when dry, but it will be secure. 100 EA 75 EA 75 EA

030 BOSS BLADE MSC09908B BLADE CRATE,RT3 8'2 in. V,09+ 1 EA 1 EA 1 EA

031 CAPITAL INDUSTRIES 7DB-30 BIN TYPE ROLL-OFF DROP BOX SIZE 30 YD USE: REFUSE 2 EA 2 EA 2 EA

032 CAPITAL INDUSTRIES 7FL-60 BIN TYPE DROP BOX SIZE 6 YD USE: REFUSE 6 EA 5 EA 5 EA

033 CAPITAL INDUSTRIES 7DB-20 BIN TYPE ROLL-OFF DROP BOX SIZE 20 YD USE: REFUSE 2 EA 2 EA 2 EA

034 CARUS CORPORATION CAIROX Potassium Permanganate FF, Free-Flowing Grade, Assay 97%, 25Kg Pail 125 EA 94 EA 94 EA

035 CASE CONSTRUCTION EQUIPMENT 76082416 EDGE TYPE LOADER MATERIAL STEEL SIZE 8 EA 6 EA 6 EA

036 CASE CONSTRUCTION EQUIPMENT 372081A1 EDGE TYPE CTR LOADER MATERIAL STEEL SIZE 2 EA 2 EA 2 EA

037 AKRO-MILS 37278 1L X 1W (IN), Mesh Side/Solid Base 15-3/4" x 11-3/4" x 8-1/4" 150 EA 112 EA 112 EA

038 CLARK RELIANCE CORP H350W Audible Alarm Horn, Weatherproof Model, (for 120VAC) 4 3/4" x 4 3/4" x 2 1/2", 100DB at 10 ft. 3 EA 2 EA 2 EA

039 LAWSON PRODUCTS A12 Adjustable Vertical Drawer, 3" H x 18" W x 12" D 36 EA 27 EA 27 EA

040 LEVITON 80781-W F Connector Wall Plate, Type Single Flush Mount, White 600 EA 450 EA 450 EA

041 CLARK-RELIANCE SWA-180-7 SIMPLIPORT 180 Water Level Gage System /// 180 DEGREE VIEWING ILLUMINATOR AND HOOD 7 EA 5 EA 5 EA

042 COOPER B-LINE SYSTEMS B54SHGALV10 CHANNEL, 13/16" X 1 5/8", 9/16" X 1 1/8" SLOTTED HOLES, 14 GA., 120" (10 FT), GALVANIZED 500 EA 375 EA 375 EA

043 COOPER B-LINE SYSTEMS B280SQZN POST BASE FOR 1 5/8" X 1 5/8" CHANNEL, 6" X 6" X 3 1/2" BASE, SQUARE, ZINC PLATED 10 EA 8 EA 8 EA

044 COOPER B-LINE SYSTEMS B22SHGALV10 CHANNEL, 1 5/8" X 1 5/8", 9/16" X 1 1/8" SLOTTED HOLES, 12 GA., 120" (10 FT), GALVANIZED 50 EA 38 EA 38 EA

045 COOPER CROUSE-HINDS RGL Runway Guard Light; L-804 LED, AMBER WITH ON/OFF SWITCH 10 EA 8 EA 8 EA

046 COOPER CROUSE-HINDS ATL Threshold Approach Light; L850E STYLE 2, UNIDIRECTIONAL, GREEN 25 EA 19 EA 19 EA

047 COOPER CROUSE-HINDS TOL-LED Omnidirectional Taxiway Edge Light; L-852T PAN ASSY 50 EA 38 EA 38 EA

048 COOPER CROUSE-HINDS HRLQ-5 HRLQ-5 High Intensity Runway Light/Quartz; L-862, 120W C/C 24 in. OAH 2 in. FRANGILBE 50 EA 38 EA 38 EA

049 COOPER CROUSE-HINDS TOL Omnidirectional Taxiway Light; L-830 ISOL TX 100W 20A/606A 25 EA 19 EA 19 EA

050 COOPER CROUSE-HINDS LBH60 2 CNDT OUTLET BODY, Conduit Type: Rigid, Connection Type: Threaded, Trade Size (in): 2, Style: LBH, Shape: LB, Number of Hubs: 2, Cover Included, Gasket Included, Composition: Iron Alloy, Exposure Rating: Indoor;Outdoor, Hazardous Rated: Yes, Approvals: UL;CSA 4 EA 3 EA 3 EA

051 COOPER CROUSE-HINDS LB67 CONDUIT FITTING, 2", LB TYPE THREADED RIGID, W/O COVER & GASKET FORM 7, FERALOY IRON ALLOY Conduit Outlet Bodies, CONDULET Series. Compatible with Rigid and Intermediate Conduit For Indoor/Outdoor Use Threaded Connections Trade Sizes 1/2~4 Inches Various Styles/Shapes Available Cast Iron/Cast Aluminum Construction 5 EA 4 EA 4 EA

052 COOPER CROUSE-HINDS GASK576 Conduit Outlet Body Gaskets, Series: CONDULET Trade Size (in): 2 Style: Form 7 Composition: Neoprene Exposure Rating: Indoor;Outdoor Approvals: UL;CSA Picture No.: COHI-BODYGASK-F7 H x W x D (in.): .1 x 3 x 7 Net Weight: .64 OZ Gross Weight: .64 OZ 5 EA 4 EA 4 EA

053 COOPER POWER SYSTEMS URT09050A1A1B1A UltraSIL Polymer-Housed VariSTAR Surge Arrester 9KV 100 EA 75 EA 75 EA

054 CORNING CABLE SYSTEMS 616102R5120003M Fiber Optic Jumper, 2 F, ST® Compatible to ST Compatible, Zipcord Tight-Buffered Cable, Riser, with 2.0 mm legs, Single-mode (OS2), 3 m, Application Vertical Riser, General Building Applications Fiber Category Single-mode (OS2) Length 3 m (9.8 ft) Flame-retardant jacket, Units per Delivery 1/1 20 EA 15 EA 15 EA

055 CORNING CABLE SYSTEMS 616102R5120002M Fiber Optic Jumper, 2 F, ST® Compatible to ST Compatible, Zipcord Tight-Buffered Cable, Riser, with 2.0 mm legs, Single-mode (OS2), 3 m, Application Vertical Riser, General Building Applications Fiber Category Single-mode (OS2) Length 2 m (6.6 ft) Flame-retardant jacket, Units per Delivery 1/1 20 EA 15 EA 15 EA

056 CORNING CABLE SYSTEMS 616102R5120001M Fiber Optic Jumper, 2 F, ST® Compatible to ST Compatible, Zipcord Tight-Buffered Cable, Riser, with 2.0 mm legs, Single-mode (OS2), 3 m, Application Vertical Riser, General Building Applications Fiber Category Single-mode (OS2) Length 1 m (3.3 ft) Flame-retardant jacket, Units per Delivery 1/1 20 EA 15 EA 15 EA

057 CORNING CABLE SYSTEMS WCH-02P Wall-Mountable Closet Housing (WCH), holds 2 CCH connector panels, no holes. Corning Cable Systems Wall-Mountable Connector Housing (WCH) provides interconnect or cross-connect capabilities between the outside plant, riser or distribution cables and the opto-electronics.Units accept standard closet connector housing (CCH) connector panels and modules and options include jumper routing guides and a bracket for securing buffer tube fan-out kits. The cable strain-relief kit (WCH-STRNRLF-KIT) is designed for easier installation and the standoff bracket (WCH-STDOFF-BKT) extends the WCH from the wall to allow cable routing behind the housing. Brackets can also be stacked to increase the amount of space for routing.An optional field-installable lock kit is available for additional security. 4 EA 3 EA 3 EA

058 CRAFCO INC 231 CRAFCO ROADSAVER 231: 30 LB/BX 1,050 BX 787 BX 787 BX

059 CREE RUUD LIGHTING STR-LWY-3M-HT-08-D-SV-525-43K-R LED STREETLIGHT FIXTURE 80 LED 10 EA 8 EA 8 EA

060 CROSBY GROUP S-209 #1018589 1-1/4 in. SCREW PIN ANCHOR SHACKLE 12-TON SELF COLORED 10 EA 8 EA 8 EA

061 CROUSE HINDS AIRPORT LIGHTING 858S5-31-5-12 LED SZ3 SF ST 3 2M 12V 5 EA 4 EA 4 EA

062 CROUSE HINDS AIRPORT LIGHTING 850A3-CR-12F-P1 RUNWAY LIGHT CENTERLINE WITH RING PRO III 10 EA 8 EA 8 EA

063 CROUSE HINDS AIRPORT LIGHTING 850A3-CC-12F-P1 RUNWAY LIGHT CENTERLINE WITH RING PRO III 10 EA 8 EA 8 EA

064 CRYOTECH E-36 Cryotech E36® liquid runway deicer is a high-performing 50% aqueous potassium acetate solution, by weight, with less than 1% corrosion inhibitors. Cryotech E36 meets the Federal Aviation Administration (FAA) approved Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) 1435 for deicing and anti-icing compounds in the form of a liquid for use on runways and taxiways. Available in Drums, Totes or Bulk. 18,368 EA 13,776 EA 13,776 EA

065 LAWSON PRODUCTS A24S Bin Stand With 8" Legs, 8" H x 35-9/16" W x 12" D 24 EA 18 EA 18 EA

066 DONALDSON - TORIT CPV-3 PowerCore CPV-3 Dust Collector, 460V 60Hz 3-phase, 1000-1500 cfm, Includes Ultra-Web filter packs, standard blue paint finish, NEMA Type 4 Control Box w/ Timer, Solenoid Enclosure, and Magnehelic Guage, unpowered-without fan 1 EA 1 EA 1 EA

067 DOW CHEMICAL COMPANY DOW 25 PSI DOW 25 PSI 2 in. 4X8 BLUE BOARD INSULATION 135 EA 101 EA 101 EA

068 EDCO EDCO C-10-13H EDCO C-10-13H CRACK CHASING SAW 2 EA 2 EA 2 EA

069 EDWARDS MANUFACTURING HAT4020 40 TON SHOP PRESS WITH 220 VOLT 3 PHASE PORTA POWER 1 EA 1 EA 1 EA

070 CRYOTECH 1400-20 NAAC SOLID DEICER, 1000KG BAG 90 BG 67 BG 67 BG

071 ELLIOT TOOL TECHNOLOGIES LTD 99150-110-7P ELECTRIC ROLLING MOTOR For 1/2” – 1-1/2” (12.7mm – 38.1mm) Tube O.D. Single Phase Voltage 110 Rated Power Input (Watts): 1100 Frequency: 40 – 60 Hz Max. Amperage: 10A (110V) 1 EA 1 EA 1 EA

072 ELLIOT TOOL TECHNOLOGIES LTD 24160 24 Series Condenser Expander, standard reach tool for expanding tubes in chillers, heat exchangers, feedwater heaters, fin fan coolers, and surface condensers. For Size 1-3/8" x 14 to 17 guage and 1-1/2" x 9 to 10 guage (BWG) tube 1 EA 1 EA 1 EA

073 ELLIOT TOOL TECHNOLOGIES LTD 24129 24 Series Condenser Expander, standard reach tool for expanding tubes in chillers, heat exchangers, feedwater heaters, fin fan coolers, and surface condensers. For Size 5/8" x 15 to 16 guage and 3/4" x 10 guage (BWG) tube 1 EA 1 EA 1 EA

074 ELLIOT TOOL TECHNOLOGIES LTD 24134 24 Series Condenser Expander, standard reach tool for expanding tubes in chillers, heat exchangers, feedwater heaters, fin fan coolers, and surface condensers. For Size 3/4" x 15 to 16 guage and 7/8" x 10 guage (BWG) tube 1 EA 1 EA 1 EA

075 EXCELON 43088 Pipe, Schedule 40, PVC, 2 In, 8 Feet Long price per ft. 3,000 FT 2,250 FT 2,250 FT

076 FERGUSON ENTERPRISES DOMESTIC DBSPA106BJ BLACK STEEL PIPE, 1-1/2 in. DOMESTIC SEAMLESS Plain End A106B Schedule 40 SRL Pipe price per ft. 105 FT 79 FT 79 FT

077 FERGUSON ENTERPRISES DOMESTIC DBSPA106BH BLACK STEEL PIPE, 1-1/4 in. DOMESTIC SEAMLESS Plain End A106B Schedule 40 SRL Pipe price per ft. 105 FT 79 FT 79 FT

078 FL SMIDTH 07-B16-06850-00 FILTER BAGS -6 in. DIAMETER X 16'X6 in. LG 2GL500T FIBER for baghouse on air pollution equipment 2,700 EA 2,025 EA 2,025 EA

079 FLIR COMMERCIAL SYSTEMS INC FLIR T640 KIT FLIR T640 25 DEGREE 24.6 MM, FLIR T640 CAMERA TEMP 1 EA 1 EA 1 EA

080 FLUKE CORPORATION FLUKE-87V/IMSK Digital Multimeter, Max. AC Volts 1000, Max. DC Volts 1000, Max. AC Amps 10, Max. DC Amps 10, Max. Ohms 50 M Ohms, Basic DC Accuracy +/-(0.05 Percent + 1 Digit), Counts 6000/19, 999, Battery Type 9V Alkaline, Safety Rating CAT III 1000V, CAT IV 600VAC Response True RMS, Capacitance Range 0.01nf to 9999uF, Frequency Counter Range 0.01 Hz to 200 kHzIncludes Current Clamp, Thermocouple Bead Probe, Test Leads, Alligator Clips 1 EA 1 EA 1 EA

081 FLUKE CORPORATION AC175 Alligator Clip Set, Slide-on, (red, black) for TL71/TL75, Jaws provide 8 mm opening, CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed, One year warranty 2 EA 2 EA 2 EA

082 FLUKE NETWORKS, INC. 44300000 ELECTRICIAN D SNIPS 2 EA 2 EA 2 EA

083 FROST FIGHTER 47102A 12" X 25' (304.8 mm x 7.62 m) Black PVC Flexible Coiled Hose Duct with Buckle 10 EA 8 EA 8 EA

084 PHILIPS ADVANCE 71A6452001D HID Ballast Kit Lamp Type Metal HalideLamp Watts 750 ANSI Code M149 Input Watts 818 Input Voltage 120/208/240/277/480 Ballast Type Core and Coil Ballast Family HID Magnetic Number of Lamps 1 Min. 60 EA 45 EA 45 EA

085 GENERAL MONITORS 45213-1 GENERAL MONITORS OXYGEN DEFICIECY SENSOR 17 EA 13 EA 13 EA

086 GENERAL MONITORS 45123-7 GENERAL MONITORS NITRIC OXIDE SENSORS 5 EA 4 EA 4 EA

087 GENERAL MONITORS 45123-3 GENERAL MONIOTRS CARBON MONOXIDE SENSORS 5 EA 4 EA 4 EA

088 GENERIC VENDOR - LUMBER 1/2 IN. CDX 1/2 15/32 CDX PLYWOOD 4' X 8' 2,376 EA 1,782 EA 1,782 EA

089 GENERIC VENDOR - LUMBER 2X4X16 2" X 4" X 16' HEM FIR DRIED LUMBER 5,328 EA 3,996 EA 3,996 EA

090 GLOBAL INDUSTRIAL EQUIPMENT CO B432072 HE40 STD2 24X24X2 FILTERS 936 EA 702 EA 702 EA

091 GOODWAY TECHNOLOGIES GTC-200BQ-5/8 BRASS CHILLER TUBE CLEANING BRUSH 5/8, QUICK CONNECT 150 EA 113 EA 113 EA

092 GOODWAY TECHNOLOGIES GTC-703Q-45-R5 GALVANIZED SPRING STEEL FLEXIBLE SHAFT 45', NYLON CASING, QUICK CONNECT COUPLING, R5 FOR USE WITH RAM-5SF SPEED-FEED TUBE CLEANER 2 EA 2 EA 2 EA

093 GRANITE CONSTRUCTION CO - ANCHORAGE 4-5 FT ROCK 4-5 FT ROCK RIP RAP unit price per ton 999 TN 749 TN 749 TN

094 GREENLEE TEXTRON INC EK12IDL11 Dieless Cordless Crimper 2 EA 2 EA 2 EA

095 HACH COMPANY DR 2800 PORTABLE BENCH TOP SPECTROPHOTOMETER FOR LAB TEST WITH LITHIUM-ION BATTERY PRODUCT DR2800-01B1 2 EA 2 EA 2 EA

096 H E WILLIAMS DIG-S22-317-WPR-EBD3-LU-HILUME-3D FIXTURE FLUORESCENT SIZE 2' X 2', 3 LAMPS 17-WATT T8, LUTRON HI LUME 3D DIMMING BALLAST 15 EA 11 EA 11 EA

097 HENKE AHW 12RR 14 FOOT Industrial Snow Wing Moldboard Height: 28” inboard 38” outboard, All hydraulic wing for popular graders• Nylatron slide guide prevents binding•Positive & Negative embankment sloping capability• 3/16” grade 50 - box paneled moldboard• T1 100,000 psi link lifts wing• MUDROC hydraulic valve is standard feature on all wings. This important safety feature prevents mechanical binding and provides for limited wing down pressure. 1 EA 1 EA 1 EA

098 HILMAN ROLLERS KRS-15-SLD Steel Chain Roller Kit; 15-ton kit capacity; four 3.75-ton diamond steel top swivel chain rollers w/ lock, 2 knock down style handles; 27-3/4 x 14-1/4 x 9-1/4 Steel Case 2 EA 2 EA 2 EA

099 HOFFMAN PROCESS INC BELL END FINNED TUBES TUBES: 5/8 IN. OD X 16 BWG (0.065 IN.) MINIMUM WALL SB-111 ANNEALED ALLOY #443 ADMIRALTY BRASS; LENGTH: 62 IN.; FINS: 0.406 IN. HIGH X 0.015 IN. THICK X 9 FINS/INCH COPPER; FIN ATTACHMENT: SOLDERED; BARE ENDS: 1.5 IN. AND 3.5 IN.; WEIGHT PER FINNED TUBE: 6.52 LBS.; TUBES ARE BELLED AT ONE END TO 1.438 IN. OD X 2.25 IN. MINIMUM STRAIGHT LENGTH; TUBES HAVE ONE PACKED FIN COLLAR X 1.5 IN. LONG, PRICE PER EACH TUBE 256 EA 192 EA 192 EA

100 HOUGHTON CHEMICAL CORP. SAFE-T-THERM SAFE-T-THERM HD HEAT TRANSFER FLUID 55 GAL DRUM 125 EA 94 EA 94 EA

101 INTEGRICO COMPOSITES 7 IN. X 9 IN. X 10 FT. PLASTIC RAILROAD TIE 7 in. X 9 IN., IMPREVIOUS TO BIOLOGICAL EFFECTS; Supplier Atlas Trading International, LLC 800 EA 600 EA 600 EA

102 EDWARDS SIGNALING 107XBRBMR120A Xtra-Brite Led Haz Location Beacon. Bracket Mount. Red Lens, 120 VAC 24 EA 18 EA 18 EA

103 JET TOOLS JET414471 JET 414471 13 X 21 3 PHASE HORIZONTAL BANDSAW WITH 1 EA 1 EA 1 EA

104 JOHN DEERE T223495 RH END BIT DEERE 950C 10 EA 8 EA 8 EA

105 JOHN DEERE T223494 LH END BIT DEERE 950C 10 EA 8 EA 8 EA

106 JOHN DEERE T223493 END CUTTING EDGE DEERE 950C 10 EA 8 EA 8 EA

107 JOHN DEERE T223468 CENTER CUTTING EDGE DEERE 950C 5 EA 4 EA 4 EA

108 JUNO LIGHTING INC T8E632UH24S FIXTURE TYPE FLUORSCENT SIZE 6 LAMP T8 H 30 EA 23 EA 23 EA

109 KABA-ILCO 5021-B-WL-26D-41 PUSHBUTTON ACCESS CONTROL, COMBINATION LOCK 10 EA 8 EA 8 EA

110 KABA-ILCO 1021-B-26D-41 MECHANICAL PUSHBUTTON COMBINATION LOCK 50 EA 38 EA 38 EA

111 KLEIN TOOLS INC K44 5/16" SCREWDRIVER SLOTTED SCREW 2 EA 2 EA 2 EA

112 KLEIN TOOLS INC K28 3/16" SCREWDRIVER SLOTTED SCREW 2 EA 2 EA 2 EA

113 LEVITON 49991-SST FastCAM Pre-polished Connector, ST (blue), Single-mode 200 EA 150 EA 150 EA

114 LEVITON 69586-U48 EXTREME 6+ UNIVERSAL PATCH PANEL 1 EA 1 EA 1 EA

115 LEVITON 61110-RW6 EXTREME CAT 6 QUICK PORT RJ-45 CONNECTOR, WHITE 48 EA 36 EA 36 EA

116 LEVITON 4925C-BCM FIVE RING HORIZONTAL PATCH CORD ORGANIZER W/COVER 2 EA 2 EA 2 EA

117 LITHONIA LHQM S W 3 G EXIT SIGN W/EMERGENCY LIGHTS, 3.3W, Green 30 EA 23 EA 23 EA

118 LMI MILTON ROY B911-297 B911-297 MILITON ROY LMI METERING PUMP 1.6 GPH 6 EA 5 EA 5 EA

119 LOCHINVAR EPN150-085 COMMERCIAL GAS WATER HEATER 85 GALLON HIGH EFFICIENCY 3 EA 2 EA 2 EA

121 MASTER APPLIANCE 10067 Wire Harness Connector Kit, 120 Piece 4 EA 3 EA 3 EA

122 MASTER LOCK 6121KALJ Keyed Padlock, Weather Resistant, Locks Keyed-Alike, not necessarily keyed to match any specific key number currently in use by customer 30 EA 23 EA 23 EA

123 MILLER ELECTRIC MFG CO 951273 MILLER DIMENSIONS 452 STATIONARY PACKAGE, RUNNING 1 EA 1 EA 1 EA

124 MILLER ELECTRIC MFG CO 903826 MODEL SSW-2020ATT SPOT WELDER 230 VAC 90AMP/// SSW-2020ATT STATIONARY W/WELD & SQUEEZE TIMER 230V 1 EA 1 EA 1 EA

125 MILLER ELECTRIC MFG CO 907500 WELDER/GENERATOR USED FOR STICK AND FLUX-CORED WELDING /// BOBCAT 250 (KOHLER), GFCI 1 EA 1 EA 1 EA

126 MILLER ELECTRIC MFG CO 043007 SPOT WELDER COOLING SYSTEM /// Coolmate™ 3 115 VAC, 50/60 Hz 1 EA 1 EA 1 EA

127 MILLER ELECTRIC MFG CO 040 220 Miller® Standard 18" Water Cooled Tongs (SPOT WELDER TONGS) 1 EA 1 EA 1 EA

128 MILLER ELECTRIC MFG CO 040 219 Miller® Standard 12" Water Cooled Tongs (SPOT WELDER TONGS) 1 EA 1 EA 1 EA

129 MILLER ELECTRIC MFG CO 040 218 Miller® Standard 6" Water Cooled Tongs (SPOT WELDER TONGS) 1 EA 1 EA 1 EA

130 MILLER ELECTRIC MFG CO 040 228 SPOT WELD TIP DRESSER USE WITH POINTED TIPS NUMBER 4 AND NUMBER 5RW ELECTRODES MILLER ELECTRIC 1 EA 1 EA 1 EA

131 MILLER ELECTRIC MFG CO 300919 Protective Cover, Engine Drive (Previous Item P/N 195333, Protective Cover, Bobcat/Trailblazer Gas) 1 EA 1 EA 1 EA

132 MILWAUKEE VALVE F-2885-FP 6 MILWAUKEE F-2885-FP 6 INCH GATE VALVE 12 EA 9 EA 9 EA

133 MODERN EQUIPMENT COMPANY INC XU1664 MECO Omaha 16’ Upright x 64” Base, Single Sided Rack, Series 5000 Extra Heavy Duty Cantilever Rack, for use with 48” Arm 7 EA 5 EA 5 EA

134 MSA 10076109 Rechargeable Lithium Ion Battery Pack 2 EA 2 EA 2 EA

135 MUELLER INDUSTRIES 429-020 Coupling, 2 In Slip, PVC, Schedule 40 300 EA 225 EA 225 EA

136 NALCO COMPANY 7390 MISSION ESSENTIAL CHEMCIALS FOR WATER PLANT 15 GAL DRUM 50 EA 38 EA 38 EA

137 NIBCO NT473BJ 1-1/2 BRZ 300# IPS CHCK VLV 10 EA 8 EA 8 EA

138 NIBCO NT473BG VALVE, Bronze 300 # Threaded Check, Dezincification resistant Y Pattern, Valve Body Material : Bronze, 600 PSI CWP/300 PSI SWP, Renewable Seat and Disc, End Connection 1 : IPS 15 EA 11 EA 11 EA

139 NIBCO NT134G 1 BRZ 150# IPS RS GATE VLV 10 EA 8 EA 8 EA

140 NIBCO NT174SSF 3/4 BRZ 300# IPS RS SS GATE VALVE 10 EA 8 EA 8 EA

141 VELAN INC VS2054W02TYG 1 Forged Steel 800# Threaded Outside Stem & Yoke Gate Valve 10 EA 8 EA 8 EA

142 NIBCO NT58570G 1 in. Bronze 600 # Threaded Full Port Ball Valve 10 EA 8 EA 8 EA

143 NIBCO NT58570F 3/4 in. Bronze 600 # Threaded Full Port Ball Valve 10 EA 8 EA 8 EA

144 ORTRONICS LEGRAND OR-S225E00 SERIES II CAT 5E TWO JACK PORT MODULE, CLARITY 5E, T568A/B , FOG WHITE 20 EA 15 EA 15 EA

145 OWENS CORNING 14 IN. IPS X 3 IN. THICK OWENS CORNING FIBERGALSS PIPE INSULATION 14 in. IPS X 3 in. THICK STRAIGHT RUN, SOLD BY LINEAR FT. 351 EA 263 EA 263 EA

146 POWELL PGA08SA58GBJ 1-1/2 Forged Steel 800# A105 SW Gate Valve Bolted Bonnet 10 EA 8 EA 8 EA

147 POWER TEMP SYSTEMS P2003T PORTABLE POWER DISTRIBUTION PANEL 200 AMP 208V, SIX 50 AMP 125/250V POWER OUTLETS 2 EA 2 EA 2 EA

148 PREFORMED LINE PRODUCTS 8006671 COYOTE RUNT CLOSURE FIBER OPTIC 12 EA 9 EA 9 EA

149 PREFORMED LINE PRODUCTS 8006366 4" X 25" ARMADILLO STAINLESS STEEL SPLICE CASE KIT FILLING FLANGE WITH DRILLABLE END PLATES 4 EA 3 EA 3 EA

150 PREFORMED LINE PRODUCTS 80806033 STANDARD SPLICE TRAY FOR COYOTE CLOSURE 25 EA 19 EA 19 EA

151 LAWSON PRODUCTS A33L Heavy-Duty Rack with Locking Bars, 14-3/4" H x 20-1/2" W x 16-3/4" D 40 EA 30 EA 30 EA

152 LAWSON PRODUCTS 1148176 40 Compartment Heavy-Duty Storage Bin With Lockable Doors 24 EA 18 EA 18 EA

153 PUROLATOR HE40-STD2 - 20" X 25" X 2" Filter, 20" X 25" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 1,332 EA 999 EA 999 EA

154 PUROLATOR HE40-STD2 - 20" X 20" X 2" Filter, 20" X 20" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 816 EA 612 EA 612 EA

155 PUROLATOR HE40-STD2 - 16" X 25" X 2" Filter, 16" X 25" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 756 EA 567 EA 567 EA

156 PUROLATOR HE40-STD2 - 20" X 24" X 2" Filter, 20" X 24" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 516 EA 387 EA 387 EA

157 PUROLATOR HE40-STD2 - 16" X 20" X 2" Filter, 16" X 20" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 780 EA 585 EA 585 EA

158 PUROLATOR HE40-STD2 - 12" X 24" X 2" Filter, 12" X 24" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 216 EA 162 EA 162 EA

159 PUROLATOR HE40-STD4 - 20" X 25" X 4" Filter, 20" X 25" X 4", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 90 EA 68 EA 68 EA

160 PUROLATOR MP20x20x1 Filter, 20" X 20" X 1", Medium Efficency, Monobond Frame, Pleated 108 EA 81 EA 81 EA

161 PUROLATOR HE40-STD2 - 20" X 30" X 2" Filter, 20" X 30" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 24 EA 18 EA 18 EA

162 PUROLATOR HE40-STD2 - 25" X 25" X 2" Filter, 25" X 25" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 12 EA 9 EA 9 EA

163 PUROLATOR HE40-STD2 - 18" X 25" X 2" Filter, 18" X 25" X 2", Medium Efficiency, High-E 40, Extended Surface Pleated, MERV Rating: 8 12 EA 9 EA 9 EA

164 PHILIPS ADVANCE 71A8970-001D Ballast Kits: Ballast Type - HID Core & Coil Kit; Lamp Type - High Pressure Sodium; Lamp Watts - 200; Circuit - CWA; Voltage - 120/208/240/277VAC; ANSI Code - S66; Min Temp ( F) - -40; Kit Contents - Ballast, Capacitor(dry-film), Bracket 80 EA 60 EA 60 EA

165 REARVIEW SYSTEMS LLC STM704QHDZM HEAVY DUTY 7 IN. COLOR LED BACKLIT LCD DIGITAL MONITOR WITH DIMMER, SWIVEL MOUNT FOR BACK UP CAMERA SYSTEM 40 EA 30 EA 30 EA

166 REARVIEW SYSTEMS LLC STM5600DK COMMERCIAL DUTY 5.6" REAR VIEW CAMERA KIT INCL. 5.6" COLOR MONITOR, 130 DEGREE HEAVY DUTY CAMERA WITH HIGH IMPACT GLASS COVER, AND 66 FT. SHIELDED CABLE 20 EA 15 EA 15 EA

167 RIDGE TOOL R63882 KJ-2200-C WATER JETTER DRAIN MACHINE 1-1/4 in. -6 1 EA 1 EA 1 EA

168 ROBERT H WAGER COMPANY 000162NAVY / 1352-SS-O 3/8" AUTOMATIC SPRING CHECK VALVE (SCAVENGER AIR VALVE) FOR SOOT BLOWERS 10 EA 8 EA 8 EA

169 S&C ELECTRIC 147413R4-S1-S2 S AND C 147413R4-S1-S2 V1- OMNI RUPTER OVERHEAD SWITCH 25KV 900AMP UPRIGHT MOUNTED; -S1 One 2⅝-inch Diameter Tubular Fiberglass Insulating Section in vertical operating shaft (rotating-type operating mechanism); -S2 One Cypoxy Insulator Unit in vertical operating shaft; -V1 Extra Height—one 6-foot, 10-inch galvanized operating pipe section, with rigid pipe coupling and guide bearing (rotating-type mechanism) 6 EA 5 EA 5 EA

170 SANDUSKY LEE EACR362478-02 ELITE COMBINATION CABINET, CHARCOAL, RECESSED HANDLE, 36" X 24" X 78" 10 EA 8 EA 8 EA

171 EATON CORPORATION 08U-X60 U SERIES MALE PIPE SWIVEL 90' ELBOW 1/2H 5/8T, 2 per PACK 40 PK 30 PK 30 PK

172 SNOQUIP INC 90070B51 51" Snow Blower Blade, CUTTING EDGE 12 EA 9 EA 9 EA

173 LAWSON PRODUCTS A7 16 Compartment Steel/Plastic Drawer, 3" H x 18" W x 12" D 24 EA 18 EA 18 EA

174 STANLEY SECURITY SOLUTIONS/HCM VPD-BB VPD VANTAGE POINT ACCESSORIES BATTERY 160 EA 120 EA 120 EA

175 TE CONNECTIVITY 244271-1 VS-3 HAND TOOL KIT 2 EA 2 EA 2 EA

176 THOMAS & BETTS AMTSR10 AMT Port Splice PVC Connector for Wire Range 1/0-14 Str 100 EA 75 EA 75 EA

177 THOMAS & BETTS EK 406 2 in. Three piece Coupling, Steel-Zinc Plated. For use with Rigid/IMC Conduit. 15 EA 11 EA 11 EA

178 THOMAS & BETTS EK 403 1 in. Three piece Coupling, Steel-Zinc Plated. For use with Rigid/IMC Conduit 50 EA 38 EA 38 EA

179 THOMAS & BETTS HC 406 2 in. Steel Compression Connector. For use with Rigid Conduit. 10 EA 8 EA 8 EA

180 THOMAS & BETTS DIH3-3-LM 1-gang 17 cu. in. Universal weatherproof Box with Three 1 in. Holes and Mounting Lugs - Silver 30 EA 23 EA 23 EA

181 THOMAS & BETTS 703 2 EG 2 in. Steel Universal Clamp with SilverGalv finish. For use with Rigid/IMC, EMT conduit and Pipe 100 EA 75 EA 75 EA

182 THOMAS & BETTS 60507 SPLICE, 2 WAY, GRAY, 6AWG 50 EA 38 EA 38 EA

183 THOMAS & BETTS IH5-2-LM 1-gang Silver Universal Box with mounting lugs, two closure plugs and ground screw 20 EA 15 EA 15 EA

184 THOMAS & BETTS IH5-1-LM LE IH51LM 1/2IN D-T DEV 20 EA 15 EA 15 EA

185 THOMAS & BETTS 54815 SPLICE, LONG BARREL, RED, 350 AWG 50 EA 38 EA 38 EA

186 TIMKEN SAOL3-3/16 3-3/16 IN. UNIVERSAL PILLOW BLOCK FIXED/FLOATING 4 EA 3 EA 3 EA

187 TOTEM EQUIP & SUPP, INC TOTEM 5CD 500,000 BTU INDIRECT FIRED HEATER TRAILER 2 EA 2 EA 2 EA

188 UNITED ROTARY BRUSH CORP 29-CW265224 TUFTED WIRE CASSETTE REFILL M-B 52 EA 39 EA 39 EA

189 UNITED ROTARY BRUSH CORP 04-100320PC POLY WAFER REPLACEMENT BROOM FILLERS 400 EA 300 EA 300 EA

190 VICTOR TECHNOLOGIES INTERNATIONAL INC 94251200 Tweco 2-MPC Cable Connection, Full Connect (1/0-2/0-3/0) Clamshell, 1 ea. Male/Female 3 EA 2 EA 2 EA

191 VICTOR TECHNOLOGIES INTERNATIONAL INC 95101110 Twecolugs 2-AF Screw On Terminal Lug (2 & 4-MPC Male, 45 DEG) 2 EA 2 EA 2 EA

192 EATON CORPORATION 08U-258 Weatherhead® U Series Female Pipe NPTF Straight 1/2 (-8)x 1/2-14 (-8) Crimp-on End Fitting 40 EA 30 EA 30 EA

193 BURNDY U27ART U COMPRESSION DIE, 3/0 ALUMINUM, RUBY, 467 32 EA 24 EA 24 EA

194 BURNDY U28RT U CONNECTOR DIE, 4/0 AWG, PURPLE, 15 32 EA 24 EA 24 EA

195 VOLVO 11011413 FRONT CUTTING EDGE END FOR 2.5 CU YARD PSM VOLVO L120 80 EA 60 EA 60 EA

196 VOLVO 11156579 BOLT ON END FOR VOLVO L60E LOADER 52 EA 39 EA 39 EA

197 WALWORTH XWAL5247-8 8 in. GATE VALVE 900# 9 EA 7 EA 7 EA

198 WALWORTH XWAL5247-4 4 in. GATE VALVE 900# 12 EA 9 EA 9 EA

199 WELBEND D600RFSOFJ 1-1/2 Carbon Steel 600 # Raised Face Slip On Flange 15 EA 11 EA 11 EA

200 STANLEY SECURITY SOLUTIONS 1C7R1-626 STANDARD UNCOMBINATED CORE 240 EA 180 EA 180 EA

TOTAL $ - 0 TOTAL $ - 0 TOTAL $ - 0

UNIT OF ISSUE LEGEND

BD Bundle

BG Bag

BX Box

CN Can

CS Case

EA Each

FT Foot

KT Kit

PG Package

PK Package

RO Roll

SE Set

ATTACHMENT #1 - SPM8E3-14-R-0009 - MRO Alaska Price Proposal

SOURCE SELECTION INFORMATION

SEE FAR 2.101 & 3.104

TAB 2- Distribution Matrix P1

Distribution Matrix - Pricing Period 1 (24 Months)

PER ORDER

1 < $10.00 $44.38 7 7

2 $10.00-$24.99 $124.22 9 9

3 $25.00-$49.99 $480.62 13 13

4 $50.00-$99.99 $1,241.94 17 17

5 $100.00-$249.99 $6,923.62 41 42

6 $250.00-$499.99 $18,056.51 48 83

7 $500.00-$749.99 $33,626.96 54 54

8 $750.00-$999.99 $42,134.64 47 52

9 $1,000.00-$2,499.99 $283,361.22 176 1,276

10 $2,500.00-$4,999.99 $607,567.24 164 442

11 $5,000.00-$7,499.99 $616,508.22 99 295

12 $7,500.00-$9,999.99 $643,927.14 75 201

13 $10,000.00-$24,999.99 $2,445,275.87 152 455

14 $25,000.00-$49,999.99 $2,306,371.38 69 122

15 $50,000.00-$74,999.99 $2,498,752.16 41 58

16 $75,000.00-$99,999.99 $1,359,582.91 16 20

17 $100,000.00-$249,999.99 $1,072,545.01 8 21

18 $250,000.00-$499,999.99 $253,107.20 1 1

19 $500,000.00-$999,999.99 $555,307.08 1 1

20 > or = $1,000,000.00 $1,000,000.00 1 1

*Number of orders and line items per tier are estimates based on the number of orders and line items per tier from FY2012 - FY2013, pro-rated to match the length of time per period.

ATTACHMENT #1 - SPM8E3-14-R-0009 - MRO Alaska Price Proposal

TAB 3- Distribution Matrix P2

Distribution Matrix - Pricing Period 2 (18 Months)

PER ORDER

1 < $10.00 5 5

2 $10.00-$24.99 7 7

3 $25.00-$49.99 10 10

4 $50.00-$99.99 13 13

5 $100.00-$249.99 31 32

6 $250.00-$499.99 36 62

7 $500.00-$749.99 41 41

8 $750.00-$999.99 35 39

9 $1,000.00-$2,499.99 132 957

10 $2,500.00-$4,999.99 123 332

11 $5,000.00-$7,499.99 74 221

12 $7,500.00-$9,999.99 56 151

13 $10,000.00-$24,999.99 114 341

14 $25,000.00-$49,999.99 52 92

15 $50,000.00-$74,999.99 31 44

16 $75,000.00-$99,999.99 12 15

17 $100,000.00-$249,999.99 6 16

18 $250,000.00-$499,999.99 1 1

19 $500,000.00-$999,999.99 1 1

20 > or = $1,000,000.00 1 1

*Number of orders and line items per tier are estimates based on the number of orders and line items per tier from FY2012 - FY2013, pro-rated to match the length of time per period.

ATTACHMENT #1 - SPM8E3-14-R-0009 - MRO Alaska 1 Price Proposal

TAB 4- Distribution Matrix P3

Distribution Matrix - Pricing Period 3 (18 Months)

PER ORDER

1 < $10.00 5 5

2 $10.00-$24.99 7 7

3 $25.00-$49.99 10 10

4 $50.00-$99.99 13 13

5 $100.00-$249.99 31 32

6 $250.00-$499.99 36 62

7 $500.00-$749.99 41 41

8 $750.00-$999.99 35 39

9 $1,000.00-$2,499.99 132 957

10 $2,500.00-$4,999.99 123 332

11 $5,000.00-$7,499.99 74 221

12 $7,500.00-$9,999.99 56 151

13 $10,000.00-$24,999.99 114 341

14 $25,000.00-$49,999.99 52 92

15 $50,000.00-$74,999.99 31 44

16 $75,000.00-$99,999.99 12 15

17 $100,000.00-$249,999.99 6 16

18 $250,000.00-$499,999.99 1 1

19 $500,000.00-$999,999.99 1 1

20 > or = $1,000,000.00 1 1

*Number of orders and line items per tier are estimates based on the number of orders and line items per tier from FY2012 - FY2013, pro-rated to match the length of time per period.

ATTACHMENT #1 - SPM8E3-14-R-0009 - MRO Alaska 1 Price Proposal

TAB 5- Incidental Service

Incidental Service Scenario Pricing

INCIDENTAL SERVICE SCENARIO PERFORMANCE LOCATION SUB-CONTRACTOR NAME TOTAL ACQUISITION PRICE*

A 20’ x 30’ rectangular conference room needs to be carpeted.

The customer requires the following carpet tile to be used: Milliken; Part Number: 6391-DR-TBD; Item Description: Modular Carpet Tile, Design Rhythms, 36"x 36" Tufted Modular Carpet with Comfort Plus cushion, Pattern Name: Zirconia, Color Name: 102 Quarry Stones, Product PIN# 639 J -DR-TBD.

The conference room has a concrete floor. The previous carpeting has been removed and the floor is level. The floor has been fully prepped and all furniture has been removed.

The Contractor shall install the carpet tiles to the manufacturer’s specifications. The Contractor is responsible for all clean-up and disposal throughout the entire work site in accordance with all applicable regulations.

The incidental service will require six (6) hours of labor per worker, with a total of two (2) workers. (Total of 12 hours of labor for this job). 354 Civil Engineer Squadron, Eielson AFB, Alaska

*Total Acquisition Price shall be for the LABOR COSTS ONLY for the incidental service. Please provide the name of your Sub-Contractor and a total acquisition price for the incidental service (LABOR ONLY for the installation and clean-up). Do NOT include the price of any supplies; assume all supplies are covered in separate line items on the delivery order. Do NOT include any management fee (Distribution).

ATTACHMENT #1 - SPM8E3-14-R-0009 - MRO Alaska Price Proposal

TAB 6- Storefront

Storefront Scenario Pricing PRICING PERIOD 1 (24 Months) PRICING PERIOD 2 (18 Months) PRICING PERIOD 3 (18 Months)

STOREFRONT SCENARIO PERFORMANCE LOCATION EMPLOYEE JOB TITLES EMPLOYEE JOB DESCRIPTIONS UNBURDENED HOURLY WAGE RATE* BURDENED HOURLY WAGE RATE* BURDENED DAILY WAGE RATE** BURDENED WEEKLY WAGE RATE*** BURDENED MONTHLY WAGE RATE**** TOTAL BURDENED WAGES UNBURDENED DAILY WAGE RATE** UNBURDENED HOURLY WAGE RATE* BURDENED HOURLY WAGE RATE* BURDENED DAILY WAGE RATE** BURDENED WEEKLY WAGE RATE*** BURDENED MONTHLY WAGE RATE**** TOTAL BURDENED WAGES UNBURDENED HOURLY WAGE RATE* BURDENED HOURLY WAGE RATE* BURDENED DAILY WAGE RATE** BURDENED WEEKLY WAGE RATE*** BURDENED MONTHLY WAGE RATE**** TOTAL BURDENED WAGES

The Storefront shall operate as a smalle industrial supply store.

A warehouse approximately 3,000-4,500 square feet shall be provided by the customer.

Hours of operation shall generally be Monday through Friday from 8:00 AM – 4:30 PM Local Time (40 hour work week).

The operation of the Storefront shall require three employees which include one Store Clerk, one Material Handler and one Store Supervisor. The job descriptions for these employees are listed in Column D. 773 Civil Engineer Squadron, Civil Engineering Material Acquisition System, Joint Base Elmendorf-Richardson, Alaska Storefront Clerk Full time on-site Storefront Clerk whose primary function is the resale of merchandise in a retail environment. This individual shall be required to keep inventory forms of merchandise stocked and merchandise returned to storage. This individual shall be required to offer customer assistance with the location or selection of merchandise as well as using the Contractor’s information technology system to conduct a material transaction. Other duties include: cleaning merchandise on or in display fixtures, maintaining the display sales area by straightening merchandise to give a neat, full, and salable appearance, removing damaged or outdated merchandise, and displaying merchandise in such a manner to maintain freshness and sale dates. $ - $ - $ -

Storefront Material Handler Full time on-site Storefront Material Handler whose primary function is to transport or store merchandise. Duties involve one or more of the following: Manually loading or unloading freight cars, trucks, or other transporting devices; unpacking, shelving, or placing items in proper storage locations; or transporting goods by hand truck, cart, or wheelbarrow. $ - $ - $ -

Storefront Manager Full time on-site Storefront Manager who will coordinate and perform all necessary functions to establish and maintain adequate stock and supply levels, oversee the Storefront, ensure successful and timely issuances of MRO goods to end-users, and manage the on-site staff. This individual will act as a liaison with Contractor’s procurement and customer support operation. $ - $ - $ -

*The Contractor is required to provide Unburdened and Burdened Hourly Wage Rates for both of the employees listed. The wage rates are employee related costs only.

The Hourly Wage Rate is calculated into total Burdened Wages per employee per pricing period as follows:

Burdened Hourly Wage Rate x 8 = Daily Wage Rate Daily Wage Rate x 5 = Weekly Wage Rate Weekly Wage Rate x 4 = Monthly Wage Rate Monthly Wage Rate x # of Months for the Pricing Period = **Total Burdened Wages

The Total Burdened Wages for each employee will be added together to equal the ***Total/Aggregate Burdened Wages per Pricing Period.

The Total/Aggregate Burdened Wages for each Pricing Period will be added together to equal the ****The Total/Overall Aggregate Burdened Wages.

The Contractor must take into consideration the requirements for employing personnel in the specified location, including minimum wage rates.

ATTACHMENT #1 - SPM8E3-14-R-0009 - MRO Alaska Price Proposal