Amendment_3.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION

NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

THE PURPOSE OF THIS AMENDMENT IS TO:

1. Provide answers to the following submitted questions:

a. Can you confirm that all the Fanuc parts listed in Attachment C are still in their original Fanuc shipping containers/boxes?

i. Yes, but opened and left in the box.

b. Can you confirm that all Fanuc parts were purchased together as a complete retrofit kit?

i. Yes.

c. Can you confirm that Fanuc agrees to warranty these parts once they are installed into the machine?

i. No.

d. Can you confirm that Fanuc will continue to offer the 2 year warranty once installed into the machine?

i. No.

e. Can you send us the original Fanuc Data Sheets that were used to purchase these components?

i. No, but we have packing slips and system configuration at the time of Fanuc factory shipment.

f. Can you confirm what Fanuc software was originally purchased and how it was compiled?

i. The system configuration at the time of Fanuc factory shipment should contain this information.

g. Can you confirm that we must use the Fanuc Enclosure P/N 44A739060-G11 and Handle P/N

44A739071-GO1?

i. No.

h. Can you provide a better description of the Op Panel Series 1 520mm LEOS STD Fanuc Part Number

44A739025-G11?

i. This is the full description and part number.

i. Can you explain the routing design for the 4M Power & Feedback Cables for the new drives / servo motors? Where are these short cables routed to

i. No.

ii. We will need more time to look in to this.

j. Will PSNSY generate their own Post Processor?

i. No.

2. Extend the closing date of the solicitation from January 18, 2016 to now read as January 29, 2016.

3. All other terms and conditions remain the same.

END OF AMENDMENT.

AMENDMENT NO.

REFERENCE NUMBER OF DOCUMENTATION

SPM4A8-16-Q-0021

NAME OF OFFEROR OR CONTRACTOR: TO ALL POTENTIAL OFFERORS

INDUSTRIAL PLANT EQUIPMENT SERVICES DIVISION

8000 JEFFERSON DAVIS HIGHWAY

RICHMOND, VA 23297

Lauren.Butrico@dla.mil NameandAddress[0]:

TO ALL POTENTIAL OFFERORS