05.pdf

rCONTRACT 10 CODE IPAGE OF PAGES

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 I

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ NO. 5. PROJECT NO. (If applicable)

05 04/0112010

6. ISSUED BY CODE SPMICI 7. ADMINISTERED BY (If other than Item 6) CODE I

DEFENSE SUPPLY CENTER PHILADELPHIA

700 ROBBINS A VENUE

PHILADELPHIA, PA 19111

ADA C. TORRES-VEGAIDSCP-FQCC 215-737 -8644

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (Xl 9A. AMENDMENT OF SOLICITATION NO. -

.; SPMICI-IO-R-0077

9B. DATED (SEE ITEM 11)

0311511 0

10A. MODIFICATION OF CONTRACT/ORDER NO.

lOB. DATED (SEE ITEM 13)

CODE IFACILITY CODE

11 . THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

D The above numbered solicitation is amended as set forth in Item 14 . The hour and date specified for receipt of Offers D is extended, !ZI is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By co mpleting Items 8 and 15, and returning ONE copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate leiter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or leiter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified .

12. Accounting and Appropriation Data (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

...22. A. THIS CHANGE ORDER IS ISSUED PURSUANT TO : (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN

THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43 .103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO

PURSUANT TO AUTHORITY OF

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor 0 is not, 0 is required to sign this document ar)d return _ _ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitationicontract subject matter where feasible.)

See Page 2

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

158. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITl!:. OF SIGNER (Type or print)

EVAN EISENBERG a

16B. UNITED STATES OF AMERICA

BY

(Signature of Contracting Officer)

16C. DATE SIGNED

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

I

SPMICI-1O-R-0077 Page 2 of2 Amendment 05

The following changes apply to subject solicitation:

Page 21, PDM 4 size should read 15.532/33 inches.

II Section B LabelinglPackaging for Dress Clothing, and Clause DOOEO I LabelinglPackaging for Dress Clothing Items ( MAR 2004) has been removed from subject solicitation. As stated on page 16: "No size, identification label required ."

III Interim changes to PD 07-01C:

Page 6, paragraph 3.4.2, add the following at the end of the paragraph: "If automatic crease banding collar stand equipment is used, the fusible material shall be on a nonwoven, thermal bonded polyester substrate coated on both sides with a polyvinyl acetate co-polymer adhesive.

The total weight of the fusible shall be a minimum of 1.4 ounces per square yard. As an alternate, a woven 100% cotton substrate coated on both sides with the polyvinyl acetate may be used. The total weight of the fusible shall be a minimum of 1.8 ounces per square yard. The coatings on both of the above materials shall be transitory in nature such that the adhesive shall wash out after two washings."

Page 12, paragraph 3.10.4.3, add the following at the end of the paragraph: "When the alternate automatic collar stand creaser is used, the shape and size of the collar stand must conform to the pattern/requirements s.pecified in this document."

The above change allows for the use of automated equipment for the collar stand sewing.

IV All other terms and conditions remain the same.