SPM1C110Q0033.pdf

PAGE OF PAGES

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDEREQUEST FOR QUOTATIONS

2. DATE ISSUED1. REQUEST NO. 3. REQUISITION/PURCHASE REQUEST NO. RATING4. CERT. FOR NAT. DEF.

UNDER BDSA REG.2

6. DELIVER BY (Date)5. ISSUED BY

7. DELIVERY

OTHERFOB DESTINATION (See Schedule)

9. DESTINATION

a. NAME OF CONSIGNEE

8. TO: See Schedule

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

11. SCHEDULE (Include applicable Federal, State and local taxes)

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 180 days from date specified in Block 10 above unless otherwise indicated: .

b. Prices quoted are:

Contained in Commercial Catalog or Published Price List No. dated page .

Contained in Internal Price List No. dated , which may be examined at our facility.

Commercial sales of comparable quantities: Quantity ; Price ;

Customer Other (provide basis)

c. FOB Point: Destination

Origin Shipping Point (City, State)

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: .

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: Vendor Toll-Free Number:

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE12. DISCOUNT FOR PROMPT PAYMENT

NOTE: Additional provisions and representations are not attached.are

15. DATE OF QUOTATION14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER CAGE

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or print) b. TELEPHONE

AREA CODEc. COUNTY

NUMBERd. CITY e. STATE f. ZIP CODE c. TITLE (Type of Print)

PerFORM (DLA)AUTHORIZED FOR LOCAL REPRODUCTION Previous edition not usable.

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AND/OR DMS REG. 1

Vendor E-mail:

X 1 51

SPM1C1-10-Q-0033 2009 NOV 05 0024396962 DOC9

DEFENSE SUPPLY CENTER PHILADELPHIA

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

Baotran Dao, PCPQAA2

PHONE: (215) 737-7018 FAX: (215)737-7429

E-mail: Baotran.Dao@dla.mil

Deliver within 120 days ADO

X

2009 DEC 08

X

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 2 51

Continuation of Blocks from STANDARD FORM 18

1. Block 10 Quote Due Date/Local Time: 12/08/2009 3:00 PM

2. Block 5 Address and Submit "mailed" offers to:

Defense Logistics Agency Defense Supply Center Philadelphia Post Office Box 56667 Philadelphia, PA 19111-6667 Solicitation Number: SPM1C1-10-Q-0033 Closing Date and Time: 12/08/2009 3:00 PM Address and Deliver "hand carried" offers, including delivery by commercial carrier, to:

Defense Supply Center Philadelphia Business Opportunities Office Bldg. 36, 2nd Floor, Wing E 700 Robbins Avenue Philadelphia, PA 19111-5092 Solicitation Number: SPM1C1-10-Q-0033 Closing Date and Time: 12/08/2009 3:00 PM Notes:

1. All hand carried offers are to be delivered to the Business Opportunities Office between 8:00 a.m. and 5:00 p.m., Monday through Friday, except for legal federal holidays as set forth in 5 USC 6103.

Offerors using a commercial carrier service must ensure that the carrier service "hand carries" the package to the Business Opportunities Office specified above for hand carried offers prior to the scheduled opening/closing time. Package must be plainly marked ON THE OUTSIDE OF THE COMMERCIAL CARRIER'S ENVELOPE with the solicitation number, date, and time set forth for receipt of offers as indicated in Block 10 of the Standard Form 18.

2. Examples of "hand carried" offers include: In-person delivery by contractor,Fed Ex, Airborne, UPS, DHL, Emery, other commercial carrier, USPS Express Mail, and USPS Certified Mail.

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 3 51

SECTION B

PR: 0024396962

PGC: 01491

ITEM DESCRIPTION:

FOOTWEAR COVER, TOXICOLOGICAL AGENTS

PROTECTIVE, M-1

ADDITIONAL INFORMATION FOR MIL-F-12224:

INTERIM SPECIFICATION CHANGES TO MIL-F-12224J,

PATTERN DATED: 14 DECEMBER 1983:

PAGE 6, PARA. 3.5.6.2 'PANEL SECTION',

LINE 5, AFTER 'LSA-1' ADD 'OR SSA-1'.

PAGE 6, PARA. 3.5.6.2 'PANEL SECTION',

LINE 5, AFTER 'LSA-1' ADD 'OR SSA-1'.

(Ref. W1491)

PAGE 5, PARA. 3.3.11 AT THE END ADD:

'NOTE: DATE OF MANUFACTURE SHALL BE PLACED ON

EACH END ITEM LABEL.'

PG 10, TABLE I. AFTER OPERATION 4.C., ADD:

'NOTE: THE SEAMS FORMED ABOVE SHALL BE SECURELY

CEMENTED AND STRAPPED ON THE INSIDE AND OUTSIDE

SURFACES.

PG. 12, TABLE I. AFTER OPERATION 7.C., ADD:

'NOTE: THE SEAMS FORMED ABOVE SHALL BE SECURELY

CEMENTED AND STRAPPED ON THE INSIDE AND OUTSIDE

SURFACES.'

PAGE 33, ADD THE FOLLOWING PARA.:

'6.6 SHELF LIFE SURVEILLANCE PROGRAM.

(10) HOODS, TOXICOLOGICAL AGENT PROTECTIVE, PER

EACH PRODUCTION LOT, SHALL BE RANDOMLY SELECTED

BY GOVERNMENT QAR DURING END ITEM LOT

INSPECTION. THEY SHALL BE SHIPPED TO THE

FOLLOWING ADDRESS:

SPECIAL PROJECTS

PROJECT CODE R4J-BLDG 1341

814 RADFORD BLVD

MARINE CORPS LOGISTICS BASE

ALBANY, GA 31704'

(Ref. W5555)

ADDITIONAL INFORMATION FOR A-A-50083:

WITH FOLLOWING INTERIM CHANGE:

PAGE 1: PARA 1.2. DELETE SECOND SENTENCE

ENTIRELY, AND SUBSTITUTE 'THE THICKNESS OF THE

MATERIAL SHALL BE 0.0010 TO 0.0090 INCHES IN

CONTINUED ON NEXT PAGE

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 4 51

ACCORDANCE WITH L-P-378.'

INTERIM CHANGES TO A-A-50083

PAGE 1, AFTER PARA. 1.1 DESIGN AND CONSTRUCTION,

INSERT THE FOLLOWING PARAGRAPH:

PARA. 1.2 MATERIAL. THE PLASTIC BAGS SHALL BE

FABRICATED FROM CLEAR POLYOLEFIN MATERIAL

CONFORMING TO L-P-378. THE THICKNESS OF THE

MATERIAL SHALL BE 0.0001 TO 0.0009 INCHES IN

ACCORDANCE WITH L-P-378.

RENUMBER PARA. 1.2 FIT AND SIZE AS PARA. 1.3 FIT

AND SIZE.

RENUMBER PARA. 1.3 CLOSURE AS PARA. 1.4 CLOSURE.

(Ref. T0401 - 05/29/2006)

ADDITIONAL INFORMATION FOR V-T-285:

V-T-285F IS HEREBY CANCELLED AND REPLACED BY

MIL-DTL-32072 THREAD, POLYESTER, DTD 08 JAN 2002

(Ref. T0706)

ADDITIONAL INFORMATION FOR CCC-C-419:

INTERIM CHANGES TO CCC-C-419G:

CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND

NUMBERED, 12/15/89.

NOTE: CCC-C-419G HAS BEEN CANCELED AND

SUPERCEDED BY MIL-PRF-20696F,

DATED 2 SEPTEMBER 97

INTERIM CHANGES TO MIL-PRF-20696F:

PAGE 4, PARAGRAPH 3.7, TABLE I REQUIREMENTS:

DELETE ALL REQUIREMENTS FOR WEIGHT AND

SUBSTITUTE THE FOLLOWING UNDER THE APPROPRIATE

COLUMN:

. TYPE I

. CLASS 1 2 3

'WEIGHT OZ/YD2 (MAX) 9.0 10.011.5

TYPEII & IV III

CLASS 1 2 3 5

. 17.0 19.0 19.0 13.0'

UNDER REQUIREMENTS FOR FLAME RESISTANCE (MAX),

AFTER FLAME AND CHAR LENGTH, DELETE '10' AND

'3.5' FROM THE TYPE II & IV CLASS 1 COLUMN AND

INSERT UNDER TYPE I CLASS 3 COLUMN.

UNDER REQUIREMENTS FOR FLAME RESISTANCE (MAX),

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 5 51

AFTER FLAME AND CHAR LENGTH, DELETE '10' AND

'3.5' FROM TYPE III CLASS V COLUMN AND INSERT

UNDER TYPE II & IV, CLASS 3 COLUMN.

PAGE 5, AFTER PARAGRAPH 3.8 ADD THE FOLLOWING:

'3.9 LENGTH AND PUT-UP. UNLESS OTHERWISE

SPECIFIED (SEE 6.2), THE CLOTH SHALL BE

FURNISHED IN ROLLS CONTAINING 50 TO 65 YARDS.

NO ROLL SHALL CONTAIN MORE THAN THREE PIECES AND

NO SINGLE PIECE SHALL BE LESS THAN 10 YARDS IN

LENGTH.'

PAGE 5, PARAGRAPH 4.3.2.1 YARD BY YARD

EXAMINATION : AT THE END OF PARAGRAPH, ADD THE

FOLLOWING: 'THE NUMBER OF ROLLS FROM WHICH THE

SAMPLE YARDAGE IS TO BE SELECTED SHALL BE IN

ACCORDANCE WITH THE FOLLOWING TABLE:

LOT SIZE (YARDS) SAMPLE SIZE (ROLLS)

UP TO 1200 INCLUSIVE 1/3

1201 UP TO AND INCLUDING 3200 5

3201 UP TO AND INCLUDING 10,0008

10,001 UP TO AND INCLUDING 35,000 13

35,001 UP TO AND INCLUDING 150,00020

150,001 AND OVER 32

1/ IF A LOT CONTAINS FEWER THAN THREE ROLLS,

EACH ROLL IN THE LOT SHALL BE EXAMINED.'

THE INSPECTION LEVEL SHALL BE II AND THE

ACCEPTABLE QUALITY LEVEL (AQL), EXPRESSED IN

TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 2.5

FOR MAJOR DEFECTS AND 6.5 FOR TOTAL (MAJOR AND

MINOR COMBINED) DEFECTS.

THE CLOTH SHALL CONFORM TO THE

REQUIREMENTS OF MIL-PRF-20696F, DATED

2 SEPTEMBER 1997.

(Ref. T0415)

ADDITIONAL INFORMATION FOR CCC-D-950:

INTERIM SPECIFICATION CHANGES TO CCC-D-950F

CHANGES TO INTERIM AMENDMENT 1:

PAGE 1, PARA. 3.6.2, SPECTRAL REFLECTANCE. LINE

4: AFTER 'WHEN': INSERT 'DESERT TAN 459,'.

PAGE 2, TABLES AI AND AII: DELETE AND SUBSTITUTE

THE FOLLOWING:

'TABLE AI. SPECTRAL REFLECTANCE VALUES (PERCENT)

FOR OLIVE GREEN OR OLIVE DRAB SHADES

WAVELENGTH, REFLECTANCE WAVELENGTH, REFLECTANCE

NANOMETERS MIN. MAX. NANOMETERS MIN. MAX.

(NM) (NM)

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 6 51

600 3 12 740 7 42 620 3 12 760 11 50 640 3 12 780 17 56 660 3 13 800 24 60 680 3 15 820 32 63 700 3 21 840 37 65 720 5 30 860 40 66

TABLE AII. SPECTRAL REFLECTANCE VALUES (PERCENT)

FOR DESERT TAN 459, TAN 380 AND TAN 686

WAVELENGTH REFLECTANCE WAVELENGTH REFLECTANCE

NANOMETERS MIN. MAX. NANOMETERS MIN. MAX.

(NM) (NM)

700 25 58 800 28 64 720 25 59 820 30 66 740 25 61 840 33 68 760 26 62 860 36 69 780 27 63

PAGE 3, PARAGRAPH 4.5.2, SPECTRAL REFLECTANCE

MEASUREMENTS IN THE VISIBLE/NEAR INFRARED.

LINE 3: BEFORE 'TAN 380' INSERT 'DESERT

TAN 459,'.

PAGE 7 PARA 3.8.2, CLASS B, WATER REPELLENT

AND MILDEW RESISTANT AFTERTREATED, DELETE AND

SUBSTITUTE 'CLASS B WATER REPELLANT TREATED

AFTERTREATED'

PAGE 7, PARA 3.8.2.2. MILDEW RESISTANCE, DELETE

IN IT'S ENTIRETY (INCLUDING TABLE 1), AND SUBSTI

TUTE 'MILDEW RESISTANCE A CERTIFICATE OF

COMPLIANCE WILL BE ACCEPTED WHICH CERTIFIES

THAT A TEXTILE MATERIAL SHALL RETAIN 75%

BREAKING STRENGTH AFTER 12 WEEKS EXPOSURE

INITIALLY WHEN EVALUATED IN PARA 4.4.3. IN

CASES WHERE THE ALTERATIVE TEST IS USED A

CERTIFICATE OF COMPLIANCE WILL BE ACCEPTED

WHICH CERTIFIES THAT A TEXTILE MATERIAL WILL

RETAIN 75% BREAKING STRENGTH AFTER A 7DAY

EXPOSURE INITIALLY WHEN EVALUATED IN PARAGRAPH

4.4.3

PAGE 8, PARA 3.8.2.2.1, MILDEW INHIBITORS,

DELETE IN IT'S ENTIRETY.

PAGE 8, PARA 3.8.3, CLASS D, MILDEW RESISTANT

AFTERTREATED, AND PARA 3.8.3.1 CLASS D CLOTH

DELETE IN THEIR ENTIRETY

PAGE 10, PARAGRAPH 4.4.2.1 YD BY YD EXAMINATION

LINE 8, DELETE '60' IN TWO PLACES AND SUBSTITUTE

'40' IN TWO PLACES. LINE 10, DELETE '60' AND

SUBSTITUTE '40'.

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 7 51

PAGE 12, TABLE II: UNDER 'COLORFASTNESS TO;',

ACROSS FROM 'ACCELERATED WEATHERING', IN TEST

METHOD COLUMN, AFTER '5671 5/': ADD 'OR 4.5.3'

FOOTNOTE 5/: AFTER 'HOURS': ADD 'FOR TM 5671,

CARBON ARC, OR 100 CLOUDLESS FOR XENON:

PAGE 13, TABLE II END ITEM TESTS, LINE 10

DELETE ACROSS AND DOWN ' INHIBITOR CONTENT...

AVERAGE OF 2 DETERMINATIONS TO THE NEAREST

PERCENT' AND SUBSTITUTE :

'CHARACTERISTIC TEST METHOD

MILDEW RESISTANCE AATCC 30, TEST 1, 7/

PAGE 14, TABLE II END ITEM TESTS, DELETE

FOOTNOTE 7/, AND SUBSTITUTE '7/ A MINIMUM

OF 5 SPECIMENS SHALL BE TESTED. THE SOIL

SHALL BE MADE OF A EQUAL BLEND OF TOPSOIL

WELL ROTTED AND SHREDDED MANURE, AND

COURSE SAND. AS AN ALTERNATIVE, AATCC

METHOD 30, TEST III MAY BE USED WITH

TECHNICAL APPROVAL FROM THE PROCURING

AGENCY.

PAGE 15,DELET IN THEIR ENTIRETY, 4.5, 4.5.1

4.5.1.1, 4.5.1.1.2, 4.5.1.1.3

PAGE 16 DELETE IN THEIR ENTIRETY 4.5.1.1.4

4.5.1.2, 4.5.1.2.1, 4.5.1.2.2, 4.5.1.2.3

PAGE 17 DELETE IN THEIR ENTIRETY 4.5.1.2.4

4.5.1.2.5.

PAGE 17, ADD THE FOLLOWING NEW PARAGRAPH:

'4.5.3 ACCELERATED WEATHERING PROCEDURE

(XENON LAMP EXPOSURE. THE TEST PROCEDURE SHALL

BE IN ACCORDANCE WITH AATCC METHOD 169 EXCEPT

THAT THE FOLLOWING DEVIATIONS SHALL APPLY:

A. THE TEST APPARATUS SHALL BE EITHER TEST

CHAMBER TYPE IA OR IB. TYPE IB SHALL BE EQUIPPED

WITH A THREE-TIERED INCLINED SPECIMEN RACK. THE

APPARATUS SHALL BE EQUIPPED WITH AN AUTOMATIC

LIGHT MONITOR AND SHALL BE CAPABLE OF AUTO-

MATICALLY CONTROLLING IRRADIANCE, TEMPERATURE,

AND HUMIDITY. THE APPARATUS SHALL BE MAINTAINED

IN ACCORDANCE WITH THE MANUFACTURER'S

RECOMMENDATIONS.

B. THE WEATHERING TEST CYCLE SHALL BE 40 MINUTES

OF LIGHT, 20 MINUTES OF LIGHT WITH WATER SPRAY

ON THE FABRIC FACE, 60 MINUTES OF LIGHT, 60

MINUTES OF DARKNESS. THE TEST CYCLES SHALL BE

REPEATED UNTIL THE TOTAL ENERGY EXPOSURE IS

EQUAL TO 100 CLOUDLESS PER SQUARE METER.

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 8 51

C. THE IRRADIANCE LEVEL SHALL BE 0.55 +/-

0.01 WATT/SQUARE METER/NANOMETER (W/M SQUARE/NM)

BANDPASS AT 340 NANOMETERS.

D. THE GLASS FILTER COMBINATION SHALL BE A

QUARTZ INNER FILTER AND A BOROSILICATE TYPE

'S' OUTER FILTER.

E. THE RELATIVE HUMIDITY SHALL BE 50 +/- 5

PERCENT DURING THE LIGHT CYCLE AND NOT LOWER

THAN 95 PERCENT DURING THE DARK CYCLE.

THE CONTROL SET POINTS SHALL BE AS FOLLOWS:

. DARK CYCLE LIGHT CYCLE

BLACK PANEL 38 DEG. C 77 DEG. C

CONDITIONING WATER 40 DEG. C 53 DEG. C

WET BULB DEPRESSION 1/ 0 DEG. C 10 DEG. C

1/ AS A GUIDE ONLY; ADJUST TO ACHIEVE REQUIRED

RELATIVE HUMIDITY (SEE E. ABOVE).

NOTE: MONITORING OF THE DRY BULB TEMPERATURE,

WET BULB DEPRESSION, IRRADIANCE, AND BLACK

PANEL TEMPERATURE IS RECOMMENDED THROUGH THE USE

OF CHART RECORDERS.'

G. PAGE 18, 6.5, DYE FORMULATION: DELETE IN ITS

ENTIRETY.

MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, 'PHYSICAL REQUIEMENTS OF THE

TYPE VI FINISHED LABEL'. UNDER 'TEARING

STRENGTH' DELETE: '(LB.) MINIMUM' AND

SUBSTITUTE: '(GNS) MINIMUM'.

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12,

1981, INCLUDING INTERIM FEDERAL SPECIFICATION

PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY

CANCELLED, AND REPLACED WITH ASTM-D-5118,

STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD

SHIPPING BOXES, AND ASTM-D-1974, STANDARD

PRACTICE FOR METHOD OF CLOSING, SEALING AND

REINFORCING FIBERBOARD SHIPPING CONTAINERS.

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 9 51

ADDITIONAL INFORMATION FOR PPP-T-45:

PPP-T-45 IS CANCELLED AND SUPERSEDED BY

A-A-1671: TAPE, GUMMED

(PAPER, REINFORCED, LAMINATED)

NOTE: A-A-1671 IS WRITTEN TO BE APPLIED TO

PPP-T-45'S REQUIREMENTS OF TYPE III, CLASS B.

(ref. T0592 - 9/11/06)

INTERIM SPECIFICATION CHANGES TO MIL-W-530H:

STANDARD SAMPLE FOR TAN 380, TYPE IIA, CLASS 3

WEBBING IS IDENTIFIED AS ROLL NO. 3507,

REFERENCED FOR SHADE, APPEARANCE AND COLOR-

FASTNESS.

STANDARD SAMPLE FOR BLACK 174, TYPE IV, CLASS 3

EBBING IS IDENTIFIED AS ROLL NO. 3425,

REFERENCED FOR SHADE, APPEARANCE & COLORFASTNESS

STANDARD SAMPLE FOR AG 483 IS IDENTIFIED

AS CHIP NO 34094, REFERENCED FOR SHADE AND

COLORFASTNESS.

STANDARD SAMPLE FOR AG 483, TYPE III, CLASS

3 IS IDENTIFIED AS CHIP NO. 34094, REFERENCED

FOR SHADE ONLY.

STANDARD SAMPLE FOR AG 483, TYPE IIB,

CLASS 3 IS IDENTIFIED AS CHIP NO. 34094

REFERENCED FOR SHADE AND COLORFASTNESS.

STANDARD SAMPLE FOR KHAKI 3709,TYPE IV, CLASS 3

WEBBING IS IDENTIFIED AS PIECE NO. 88172,

REFERENCED FOR SHADE ONLY.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS

MIL-C-44436, ROLL #3729 (THE FOLIAGE GREEN 502

AREA OF THE PATTERN), AND REFERENCED FOR SHADE

ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER

NOTICE. THIS APPLIES TO TYPE IIA, CLASS 3.

ADDITIONAL INTERIM CHANGES TO MIL-W-530H:

PAGE 19, TABLE IX, COMPONENT AND MATERIAL

TEST, DELETE REFERENCES TO FOLLOWING FED-STD-

191 TEST METHODS AND REPLACE WITH THE FOLLOWING:

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 10 51

DELETE TEST METHOD '1200' AND REPLACE WITH

'AATCC-20, FIBER ANALYSIS: QUALITATIVE, OR,

ASTM-D-276, IDENTIFICATION OF FIBERS IN

TEXTILES'.

DELETE TEST METHOD '4021' AND REPLACE WITH

'ASTM-D-1907, LINEAR DENSITY OF YARN (#) BY

THE SKEIN METHOD'.

PAGE 23, TABLE XII, END ITEM TESTS, DELETE

REFERENCES TO FOLLOWING FED-STD-191 TEST

METHODS AND REPLACE WITH THE FOLLOWING:

DELETE TEST METHOD '2020' AND REPLACE WITH

'PRESENCE OF LABILE SULFUR. IN THE DETERMINA-

TION OF PRESENCE OF LABILE SULFUR IN TEXTILE

MATERIALS WITH LEAD ACETATE, TWO 1.50 PLUS OR

MINUS GRAM SAMPLES FROM EACH MATERIAL SUBMITTED

FOR EVALUATION SHALL BE TESTED. EACH OF THE TWO

SAMPLES SHALL BE CUT INTO VERY SMALL PIECES AND

PLACED INTO SEPARATE TEST TUBES. THE SAMPLES

SHALL BE SUBMERSED IN A STANNOUS CHLORIDE

SOLUTION THAT CONTAINS 100 GRAMS OF STANNOUS

CHLORIDE CRYSTALS ACS IN 100 MILLILITERS OF

HYDROCHLORIC ACID ACS (35% CONCENTRATION) AND

50 MILLILITERS OF DISTILLED WATER. A FILTER

PAPER WET OUT WITH A 5.0% LEAD ACETATE SOLUTION

SHALL BE PLACED OVER TOP OF THE TEST TUBE. THE

LEAD ACETATE SOLUTION CONTAINS 5.0 GRAMS OF LEAD

ACETATE CP REAGENT GRADE AND ENOUGH DISTILLED

WATER TO MAKE UP A 100 MILLILITER SOLUTION. IF

THE SOLUTION IS NOT CLEAR, ADD A FEW DROPS (ONE

THE TEXTILE SAMPLE, STANNOUS CHLORIDE AND WET

FILTER PAPER SHALL BE HEATED OVER A LOW FLAME

UNTIL THE SOLUTION IS BOILING. THE SOLUTION

SHOULD NOT BE HEATED FOR MORE THAN 15 SECONDS.

A BROWN TO BLACK STAIN ON THE FILTER PAPER

SHOULD BE EVALUATED AS FOLLOWS:

FREE - THE FILTER PAPER SHOWS NO DISCOLORATION

. OR STAINING OF ANY KIND.

SLIGHT - THE FILTER PAPER SHOWS A LIGHT TAN-

. LIGHT BROWN DISCOLORATION STAIN.

MODERATE - THE FILTER PAPER SHOWS A DARK BROWN

. DISCOLORATION STAIN.

SEVERE - THE FILTER PAPER SHOWS A BLACK COLOR

. STAIN.'

DELETE TEST METHOD '5671' AND REPLACE WITH

'AATCC-111A, WEATHER RESISTANCE: SUNSHINE

ARC LAMP EXPOSURE WITH WETTING'.

DELETE TEST METHOD '5651' AND REPLACE WITH

'AATCC-8, COLORFASTNESS TO CROCKING: AATCC

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 11 51

CROCKMETER METHOD'.

DELETE TEST METHOD '5610' AND REPLACE WITH

'AATCC-61, TEST 3A, COLORFASTNESS TO LAUNDERING,

HOME AND COMMERCIAL: ACCELERATED'.

DELETE TEST METHOD '2611' AND REPLACE WITH

'AATCC-20A, FIBER ANALYSIS: QUANTITATIVE' OR

'ASTM-D-629, QUANTITATIVE ANALYSIS OF TEXTILES'.

DELETE TEST METHOD '4500' AND REPLACE WITH

'3.7.2.1.1 TOXICITY. THE FINISHED CLOTH SHALL

NOT PRESENT A DERMAL HEALTH HAXARD WHEN USED

AS INTENDED. BEFORE USE, MILDEW INHIBITORS MUST

HAVE WRITTEN TOXICITY APPROVAL FROM U.S.ARMY

CENTER FOR HEALTH PROMOTIONAND PREVENTIVE

MEDICINE, 5158 BLACKHAWK RD., ABERDEEN PROVING

GROUND, MARYLAND 21010-5403'

'AATCC-70, WATER REPELLENCY: TUMBLE JAR

DYNAMIC ABSORPTION TEST'.

DELETE TEST METHOD '2060' AND REPLACE WITH

'USE THE MANUFACTURER'S TEST METHODOLOGY'.

DELETE TEST METHOD '2050' AND REPLACE WITH

'ASTM-E-478, CHEMICAL ANALYSIS OF COPPER ALLOY'.

DELETE TEST METHOD '2011' WITHOUT REPLACEMENT.

DELETE TEST METHOD '2811' AND REPLACE WITH

'AATCC-81, PH OF THE WATER EXTRACT FROM BLEACHED

TEXTILES' OR 'ASTM-D-2165, PH OF AQUEOUS EXTRACT

OF WOOL AND SIMILAR ANIMAL FIBERS'.

DELETE TEST METHOD '5041' AND REPLACE WITH

'ASTM-D-3776, MASS PER UNIT AREA (WEIGHT)

OF FABRIC'.

DELETE TEST METHOD '5050' AND REPLACE WITH

'ASTM-D-3775, FABRIC COUNT OF WOVEN FABRIC'.

DELETE TEST METHOD '4108' AND REPLACE WITH

'ASTM-D-5035, BREAKING FORCE AND ELONGATION OF

TEXTILE FABRICS (STRIP METHOD)'.

DELETE TEST METHOD '5050' AND REPLACE WITH

'ASTM-D-1777, THICKNESS OF TEXTILE MATERIALS.

NOTE: A THICKNESS GAUGE OF THE DEAD-WEIGHT

TYPE EQUIPPED WITH A DIAL GRADUATED TO READ

DIRECTLY TO 0.00001 INCHES SHALL BE USED. THE

PRESSER FOOT SHALL BE CIRCULAR, WITH A DIAMETER

OF 0.375 PLUS OR MINUS 0.00001 INCHES AND WITH

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 12 51

THE MOVING PARTS WEIGHTED TO APPLY A TOTAL LOAD

OF 3.4 PLUS OR MINUS 0.1 POUNDS PER SQUARE INCH

TO THE SPECIMEN. THE ANVIL SHALL BE NOT LESS

THAN 0.250 INCHES IN DIAMETER. THE PRESSER FOOT

AND ANVIL SURFACE SHALL BE PLANNED TO WITHIN

0.00001 INCHES AND SHALL BE PARALLEL TO EACH

TO WITHIN 0.00001 INCHES. THE MICROMETER SHALL

BE CAPABLE OF REPEATING IT READING TO 0.00005

INCHES AT ZERO SETTING OR ON A STEEL GAUGE

BLOCK. THE FIVE SPECIMENS SHALL BE TESTED AND

THE RESULTS AVERAGED AND REPORTED TO THE

NEAREST 0.001 INCHES.

STANDARD SAMPLE FOR AG 483 FOR TYPE IIA,

CLASS 4 FABRIC IS IDENTIFIED AS CHIP NO 34094,

REFERENCED FOR SHADE, COLORFASTNESS AND FINISH.

STANDARD SAMPLE FOR AG 483, TYPE III,

CLASS 4 IS IDENTIFIED AS CHIP NO. 34094.

REFERENCED FOR SHADE AND COLORFASTNESS.

STANDARD SAMPLE FOR AG 483, TYPE IIB

CLASS 4 FABRIC IS IDENTIFIED AS CHIP NO. 34094,

REFERENCED FOR SHADE, FINISH AND COLORFASTNESS.

STANDARD SAMPLE FOR AG 483, TYPE VI, CLASS

7 WEBBING IS IDENTIFIED AS CHIP 34094(REFERENCED

AS TYPE VIII) AND REFERENCED FOR SHADE ONLY.

STANDARD SAMPLE FOR AG 483, TYPE II, CLASS

4 WEBBING IS IDENTIFIED AS CHIP NO. 34094,

REFERENCED FOR SHADE AND COLORFASTNESS.

STANDARD SAMPLE FOR AG 483, TYPE III, CLASS

4 WEBBING IS IDENTIFIED AS CHIP NO. 34094,

REFERENCED FOR SHADE AND COLORFASTNESS.

STANDARD SAMPLE FOR AG 483, TYPE II, CLASS

4 WEBBING IS IDENTIFIED AS CHIP NO. 34094,

REFERENCED FOR SHADE AND COLORFASTNESS.

STANDARD SAMPLE FOR AG 483, FOR TYPE II, CLASS

3 WEBBING IS IDENTIFIED AS CHIP NO. 34094,

REFERENCED FOR SHADE AND COLORFASTNESS.

STANDARD SAMPLE FOR KHAKI SHADE 3709 IS

IDENTIFIED AS PIECE NO. 88172 REFERENCED FOR

SHADE ONLY.

PAGE 1, SUBPARA. CLASS 1A, DELETE '2,2'METHYL-

ENEBIS-(4-CHLOROPHENOL)(SEE 6.5) AND SUBSTITUTE

'TREATED WITH AN INORGANIC, METALIZED MILDEW

INHIBITOR SEE (6.2).

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 13 51

PAGE 2, SUBPARA. 2A, DELETE '2,2' METHYLENEBIS-

-(4-CHLOROPHENOL) (SEE 6.5)' AND SUBSTITUTE

'TREATED WITH AN INORGANIC, METALIZED, MILDEW

INHIBITOR SEE (6.2).'

SUBPARA. 7, DELETE '2,2'METHYLENEBIS-(4-CHOLORO-

PHENOL) (SEE 6.5) AND SUBSTITUTE 'TREATED WITH

AN INORGANIC, METALIZED, MILDEW INHIBITOR. (6.2)

PAGE 4, 3.4 ADD AFTER (SEE 6.2) INTERIM STANDARD

SAMPLE FOR FOLIAGE GREEN 504 IS IDENTIFIED AS

ROLL #3721 (THE FOLIAGE GREEN 502 AREA OF THE

PATTERN), AND REFERENCED FOR SHADE ONLY.

FOLIAGE GREEN 504 IS TO BE USED AS SPECIFIED

BY CONTRACT.

PAGE 6, PARA. 3.7.2.1, DELETE IN ITS ENTIRETY

AND SUBSTITUTE THE FOLLOWING. 'A CERTIFICATE

OF COMPLIANCE WILL BE ACCEPTED WHICH CERTIFIES

THAT THE TEXTILE MATERIAL SHALL RETAIN A 75%

BREAKING STRENGTH AFTER 12 WEEKS SOIL BURIAL

INITIALLY AND AFTER LEACHING WHEN TESTED IN

ACCORDANCE WITH AATCC TEST METHOD 30, ANTIFUNGAL

ACTIVITY, ASSESSMENT OF TEXTILE MATERIALS:

MILDEW AND ROT RESISTANCE OF TEXTILE MATERIALS,

TEST 1.'

PAGE 6, PARA 3.7.2.1.1, DELETE AND SUBSTITUTE:

'3.7.2.1.1 TOXICITY. THE FINISHED CLOTH SHALL

NOT PRESENT A DERMAL HEALTH HAZARD WHEN USED

AS INTENDED. BEFORE USE, MILDEW INHIBITORS MUST

HAVE WRITTEN TOXICITY APPROVAL FROM U.S.ARMY

CENTER FOR HEALTH PROMOTION AND PREVENTIVE

MEDICINE, 5158 BLACKHAWK RD., ABERDEEN PROVING

GROUND, MARYLAND 21010-5403'

PAGE 7, PARA 3.7.2.2, DELETE IN ITS ENTIRETY.

PAGE 7, PARA 3.7.2.2.1, DELETE IN ITS ENTIRETY.

PAGE 12, TABLE VI, ACROSS FROM 1' 1/ AND UNDER

EACH OF THE RESPECTIVE COLUMNS ADD THE

FOLLOWING:

FACE, MIDDLE, AND BACK

WARP 4/

OR 48 6/

BINDER WARP

STUFFER WARP

20 6/

YARNS PER INCH, FILLING

OR 36 6/

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 14 51

WARP (EXCEPT STUFFER)

OR 9/4 6/

FILLING

OR 8/2 6/

STUFFER WARP

9/4 6/

PAGE 19, PARAGRAPH 4.4.2.1. YARD-BY-YARD

EXAMINATION. LINE 13, DELETE '0.40' AND

SUBSTITUTE '0.25'. LINE 14, DELETE '1.50' AND

SUBSTITUTE '1.0'. LINE 15, DELETE '0.65' AND

SUBSTITUTE '0.40'. LINE 16, DELETE '2.50' AND

SUBSTITUTE '1.50'. LINE 17, DELETE '1.00' AND

SUBSTITUTE '0.65'. LINE 18, DELETE '4.00' AND

SUBSTITUTE '2.5'

PAGE 20, TABLE X, UNDER 'DEFECT' COLUMN, LINE 16

DELETE 'KNOT ON SURFACE OR EDGES 1/'.

PAGE 30, ADD PARA'6.13 SOURCES OF MILDEW

INHIBITOR:

A. ROHM AND HASS COMPANY 100 INDEPENDENCE MALL

WEST, PHILADELPHIA, PA 19106-2899

B. KENNEY SALES ASSOCIATES, P.O. BOX 258

89 MAIN ST., MEDWAY, MA 02053

APPROVED AQUEOUS MILDEW TREATMENTS FOR

MIL-W-43638 WEBBING, TEXTILE, WOVEN FOR

TENT FRAMING, MIL-W-5665,WEBBING, TEXTILE,

COTTON WARP, MIL-W-530, WEBBING, TEXTILE,

COTTON GENERAL PURPOSE, NATURAL OR IN COLORS,

AND MIL-T-43566, TAPE, TEXTILE, COTTON OR

POLYESTER, GENERAL PURPOSE, NATURAL OR IN

COLORS, JJ-W-155, WEBBING, TEXTILE,

(COTTON, ELASTIC)

PRODUCT SUPPLIER

CUNILATE 2002 MORTON INTERNATIONAL, INC

. 150 ANDOVER STREET

. DANVERS, MA. 01923

. TEL: (508-774-3100)

(Ref. T1525)

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND

REPLACED BY THE FOLLOWING: INTERNATIONAL

STANDARDS ISO 9001:2000

OR AMERICAN SOCIETY FOR QUALITY ASQ 2003

VERSION.

HIGHER LEVEL INSPECTION SYSTEM:

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 15 51

THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH

YOUR

BID PROPOSAL FOR EVALUATION AND APPROVAL BY

DSCP'S

CONTRACTING OFFICER.

INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT

LIMITED TO THE INTERNATIONAL STANDARDS ISO 9002

OR ASQ 2003 MAY BE UTILIZED IF TAILORED TO THE

SPECIFIC

QUALITY ASSURANCE REQUIREMENTS IN THIS

SOLICITATION.

NOTE: MIL-DTL-43734E, DATED 22 SEPTEMBER 2005

CONTAINS ERRORS AND

SHOULD NOT BE USED. USERS SHOULD DESTROY ALL

COPIES OF MIL-DTL-43734E.

USERS SHOULD USE MIL-C-43734D UNTIL REVISION F

IS FINALIZED & PUBLISHED.

ADDITIONAL INFORMATION FOR MIL-C-43734D,

3/24/06:

STANDARD SAMPLE FOR CLASS 1, SHADE BLACK

375 IS IDENTIFIED AS ROLL NO. 3442 AND

REFERENCED FOR SHADE APPEARANCE

STANDARD SAMPLE FOR CLASS 1, TAN 495 IS

IDENTIFIED AS ROLL NO. 3503 AND REFERENCED

FOR SHADE ONLY.

STANDARD SAMPLE FOR ALL CLASSES OF WOODLAND

PRINTED CAMOUFLAGE IS IDENTIFIED AS

ROLL NO. 3677 AND REFERENCED FOR SHADE,

APPEARANCE AND COLORFASTNESS.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREE 504 IS

IDENTIFIED AS ROLL #3721(THE FOLIAGE GREEN 502

AREA OF THE PATTERN), AND IS REFERENCED FOR

SHADE ONLY.

STANDARD SAMPLE FOR UNIVERSAL CAMOUFLAGE PATTERN

IS IDENTIFIED

AS ROLL #3746.

INTERIM CHANGES TO MIL-C-43734D:

PAGE 1:

PARA. 1.2, CLASS 1 AND CLASS 3: DELETE 'OLIVE

GREEN 106' AND SUBSTITUTE 'CAMOUFLAGE GREEN 483'

IN BOTH LOCATIONS.

PAGE 4:

PARA. 3.4.1, LINE 2, AFTER THE WORD 'BE' DELETE

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 16 51

REMAINDER AND SUBSTITUTE 'CAMOUFLAGE GREEN 483.

WHEN SPECIFIED THE COLOR SHALL BE FOLIAGE

GREEN 504. (SEE 6.5.1).'

PAGE 4, PARA. 3.4.2 LINE 1, AT THE

BEGINNING OF THE FIRST SENTENCE ADD:

UNLESS OTHERWISE SPECIFIED AND

AT LINE 8, AT THE END OF THE PARAGRAPH ADD:

'WHEN SPECIFIED THE COLOR SHALL BE

UNIVERSAL CAMOUFLAGE.'.

PAGE 4, PARA. 3.4.4.2, LINE 4, DELETE

'+1.25, -2.50' AND SUBSTITUTE '+1.75'.

PAGE 5, DELETE 3.4.6 IN IT'S ENTIRITY AND

SUBSTITUTE ' 3.4.6 INFRARED REFLECTANCE

REQUIREMENTS. CLASSES 2, 4 AND 5 SHALL CONFORM

TO THE INFRARED REFLECTANCE REQUIREMENTS

SPECIFIED IN TABLE I, AND CLASSES 1 AND 3 SHALL

CONFORM TO THE INFRARED REFLECTANCE REQUIREMENTS

SPECIFIED IN TABLE IA, BOTH INITIALLY AND AFTER

3 ACCELERATED LAUNDERINGS WHEN TESTED AS

SPECIFIED IN 4.4.3

DELETE TABLE I IN ITS ENTIRETY AND SUBSTITUTE

TABLE I. SPECTRAL REFLECTANCE

REQUIREMENTS,WOODLAND

CAMOUFLAGE CLASSES 2, 4, AND 5

REFLECTANCE VALUES (PERCENT)

WOODLAND CAMOUFLAGE

WAVELENGTH BLACK 357 LIGHT GREEN 354 DARK GREEN

NAMOMETERS MIN. MAX. MIN. MAX. AND BROWN 356

. MIN. MAX.

600 -- -- 8 20 3 9 620 -- -- 8 20 3 9 640 -- -- 8 20 3 9 660 -- -- 8 20 3 12 680 -- -- 10 30 3 14 700 -- 20 18 50 5 28 720 -- 30 22 54 7 44 740 -- 33 30 56 12 52 760 -- 33 35 58 18 56 780 -- 34 40 62 26 56 800 -- 34 55 80 34 56 820 -- 35 55 80 42 60 840 -- 35 55 82 44 60 860 -- 35 60 82 44 60

AFTER TABLE I INSERT TABLE IA

'TABLE IA SPECTRAL REFLECTANCE (PERCENT) FOR

CAMOUFLAGE GREEN 483, CLASSES 1 AND 3

WAVELENGTH, MIN MAX

NANOMETERS MIN MAX MIN MAX MIN MAX

(NM)

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 17 51

600 3 10 620 3 10 640 3 10 660 3 12 680 3 14 700 4 28 720 5 40 740 10 52 760 18 56 780 20 56 800 24 58 820 30 60 840 38 60 860 40 60

PAGE 6:

PARA. 3.7.1. LINE 2, DELETE ' AND A FLUOROCARBON

EXTENDER' AND SUBSTITUTE ' AND, OPTIONALLY, A

MELAMINE HYDROPHOLE '.

PAGE 6, TABLE II:

YARNS PER INCH, WARP, UNDER CLASS 4 MAX:

DELETE '48', UNDER CLASS 5 MIN: DELETE '50'

AND SUBSTITUTE '48'.

YARNS PER INCH, FILLING, UNDER CLASS 4 MAX:

DELETE '35'.

BREAKING STRENGTH, WARP, UNDER CLASS 4 MIN:

DELETE '325' AND SUBSTITUTE '300', UNDER CLASS 5

MIN: DELETE '325' AND SUBSTITUTE '275'.

BREAKING STRENGTH, FILLING, UNDER CLASS 4 MIN:

DELETE '250' AND SUBSTITUTE '225', UNDER CLASS 5

MIN: DELETE '225' AND SUBSTITUTE '200'.

PAGE 14, UNDER DIMENSIONAL STABILITY ADD

'SPECTRAL REFLECTANCE: (ALL CLASSES)

INITIAL 3.4.6 4.5.1

ACCELERATED LAUNDERING (3 CYCLES) 3.4.6

AATCC 61 OPT 3A 7/& 4.5.1

PAGE 15 AFTER 6/ INSERT ' 7/ A 4 GRAM SAMPLE

SIZE SHALL BE USED. FOR CLASSES 2, 4, AND 5

EACH COLOR SHALL BE TESTED SEPERATLY. (NOTE

A SAMPLE SIZE LARGE ENOUGH TO EVALUATE SPECTRAL

REFLECTANCE SHALL BE USED). TEN (10) STAINLESS

.SPHERES AND 1993 AATCC STANDARD REFERENCE

DETERGENT WITHOUT OPTICAL BRIGHTENER SHALL

BE USED

PAGE 17:

PARA. 6.5.1: DELETE AND SUBSTITUTE THE

FOLLOWING: '6.5.1 CLASSES 1 AND 3. THE FOLLOWING

DYES HAVE BEEN FOUND TO BE ACCEPTABLE FOR DYEING

CAMOUFLAGE GREEN 483. ACID ORANGE 162,

ACID BLUE 171'

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 18 51

PAGE 18:

DELETE '6.6.1' AND '6.6.2' AND SUBSTITUTE:

'6.6.1 CLASSES 1, 2, AND 3. CLASSES 1, 2 AND

3 WARP AND FILLING NOMINAL YARN SIZES OF 1000

DENIER, AIR TEXTURED, HIGH TENACITY, TYPE 440

CORDURA NYLON, AND NOMINAL YARN SIZES OF 950

DENIER, AIR TEXTURED, HIGH TENACITY, ANSO-TEX

ARE SATISFACTORY FOR THE MANUFACTURE OF THESE

CLOTHS.'

6.6.2 CLASSES 4 AND 5. CLASSES 4 AND 5 WARP

AND FILLING NOMINAL YARN SIZES OF 500 DENIER

AIR TEXTURED, HIGH TENACITY, TYPE 440 CORDURA

NYLON OR ANSO-TEX NYLON ARE SATISFACTORY FOR THE

MANUFACTURE OF THESE CLOTHS.'

NEW PARAGRAPH:

'6.6.3 YARN SOURCES. THE TYPE 440 CORDURA

NYLON YARNS ARE OBTAINABLE FROM E.I.DUPONT DE

NEMOURS CO., WILMINGTON, DE. 19898, AND THE

ANSO-TEX NYLON YARNS ARE OBTAINABLE FROM

ALLIED FIBERS, NEW YORK, NY.'

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS

HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING

FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST

SENTENCE AND SUBSTITUTE: 'THE SPECIMEN SHALL BE

CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE

OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF

SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF

THE SPECIMEN EXTENDS BEYOND THE CENTER OF

ROTATION (FACE OF THE VISE), AND WITH THE LONG

EDGE PARALLEL TO THE FACE OF THE DIAL PLATE'.

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE

WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE

'B-97' AND SUBSTITUTE 'B-91'.

THE FOLLOWING METHODS ARE IDENTIFIED AS

SPECIFYING OZONE DEPLETING SUBSTANCES: 1100,

1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS

REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE,

ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN

OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM)

AND IS THEREFORE PROHIBITED. THE USE OF EITHER

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 19 51

ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS

ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL;

CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3

DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: 'THE SPECIMEN SHALL BE CLAMPED

FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF

THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES

WITHIN THE CLAMP AND 1' OF THE SPECIMEN EXTENDS

BEYOND THE CENTER OF ROTATION (INNER FACE OF THE

VISE) AND WITH THE LONG EDGE PARALLEL TO THE

FACE OF THE DIAL PLATE.'

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR

TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8:

DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS

AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: 'THE SPECIMENS AND BALLAST SHALL

BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN

A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF

140-180 DEG. F. THIS TEMPERATURE RANGE

CORRESPONDS TO A SETTING OF 'HIGH' ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING

SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES

ARE DRY IN A ROTATING TUMBLE DRYER.'

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE

BEGINNING WITH 'THE SPECIMENS AND BALLAST' IN

ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:

'THE SPECIMENS AND BALLAST SHALL BE SEPARATED,

OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED

DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A

SETTING OF 'HIGH' ON THE TEMPERATURE INDICATOR

ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLES ARE DRY.'

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS;

DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER

OF DETERMINATIONS ADD 'PER SAMPLEUNIT'. PAGE 1,

PARA. 4: DELETE 'APPARATUS' AND SUBSTITUTE

'APPARATUS'. PAGE 1, PARA. 5.1, LINE 3: AFTER

'AT' DELETE'APPROXIMATELY'.

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF'

ADD '+-'. LINE 6: AFTER 'TO' ADD '+-'.

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND

SUBSTITUTE WITH THE FOLLOWING:'5.3 MOUNT A

SPECIMEN TIGHTLY ACROSS THE ELECTRODES,

CENTERING IT OVER THE SENSOR OPENING. THE

SURFACE OF THE TEST SPECIMEN (BACK OR FRONT)

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 20 51

SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE

RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY

THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE

LEVELS OF LESS +500 VOLTS YIELD THE BEST

RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR

A PERIOD OF 20 SECS. AT THE END OF THE 20

SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS)

SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY

GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN

WITH RESPECT TO TIME SHALL BE PLOTTED ON THE

RECORDER. NOTE: IN SOME CASES, THE TEST

EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME

INFORMATION AND A CHART RECORDER IS NOT

NECESSARY.'

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE

BEGINNING WITH 'IF THE SPECIMEN DID' IN ITS

ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:

'RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING

POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM

VOLTAGE LEVEL ACHIEVED.'

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING

PRIOR TO 1ST SENTENCE: 'REVERSE VOLTAGE POLARITY

REPEAT MEASUREMENT, ANDRECORD RESULTS.'

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE

AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE

SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING

DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR

EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF)

TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS

OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,

THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF

THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND

FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND

THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS

GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND

FILLING DIRECTIONS. IT SHALL BE INDICATED

WHETHER THE FABRIC ISACCEPTABLE OR

NON-ACCEPTABLE.'

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE

406C AND SUBSTITUTE WITH '406D'.

AFTER PARA. 7.1, ADD THE FOLLOWING: '7.2 NOTE:

IF THE MODEL 406D STATIC DECAY METER, OR

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 21 51

EQUIVALENT, IS USED, A CHART RECORDER ISNOT

MANDATORY FOR THE TEST.'

ADDITIONAL INFORMATION FOR FED-STD-601:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T0214)

ADDITIONAL INFORMATION FOR MIL-STD-105E:

NOTE: MIL-STD-105 HAS BEEN CANCELLED AND

REPLACED

BY THE FOLLOWING: 'AMERICAN NATIONAL STANDARDS

INSTITUTE (ANSI) ANSI/ASQC Z1.4 - SAMPLING

PROCEDURES AND TABLES FOR INSPECTION BY

ATTRIBUTES'.

APPLICATION FOR COPIES SHOULD BE OBTAINED FROM:

AMERICAN SOCIETY FOR QUALITY CONTROL

611 EAST WISCONSIN AVE

MILWAUKEE, WI 53202

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF

DEFENSE STANDARD PRACTICE MILITARY MARKING FOR

SHIPMENT AND STORAGE - DATED

19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING

CONTAINERS OF ITEMS

IN THE DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND

TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN

THE NAME IDENTIFIES THE MATERIAL) SHALL BE

OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF

DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE

MATERIAL AS BEING CLOTHING, IT MAY REMAIN.

NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED

INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH

SHIP- MENT. THE WORDS 'PACKING LIST HERE' SHALL

BE STENCILED, NOT

HAND LETTERED, ON THE CONTAINER.

ADDITIONAL INFORMATION:

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 22 51

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.

ADDITIONAL INFORMATION: MIL-STD-731 IS HEREBY

CANCELLED, NOTICE 2 DATED 12/5/95. ASTM-D-6199

- 'STANDARD PRACTICE FOR QUALITY OF WOOD MEMBERS

OF CONTAINERS AND PALLETS' HAS BEEN ADOPTED AS A

REPLACEMENT AS OF 7/29/98.

(ref. T0340 - May 18, 2006)

BAR CODE LABEL/TAG. EACH PAIR OF FOOTWEAR

SHALL BE BAR CODED WITH A TYPE VIII, CLASS 18,

LABEL/TAG OF DDD-L-20. THE LABEL/TAG SHALL BE

LOCATED SO THAT IT IS COMPLETELY VISIBLE ON

THE ITEM WHEN IT IS FOLDED AND/OR PACKAGED

AS SPECIFIED AND SHALL CAUSE NO DAMAGE TO

THE ITEM.

EXAMINE DEFECT CLASSIFICATION

BAR CODE BAR CODE OMITTED OR

LABEL/TAG NOT READABLE BY

. SCANNER. MINOR

. HUMAN READABLE

. INTERPRETATION (HRI)

. OMITTED OR ILLEGIBLE. MINOR

. NOT VISIBLE ON FOLDED/ PACKAGED ITEM.

MINOR

CAUSES DAMAGE TO THE ITEM.

MAJOR

(Ref. T6852)

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT

SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 23 51

MILWAUKEE, WISCONSIN 53203

CURRENT DOD PREFERRED METHODS FOR ACCEPTANCE OF

PRODUCTS ARE DESCRIBED

IN MIL-STD-1916, DATED APRIL 1, 1996, AND SHOULD

BE CONSIDERED FOR

FUTURE ACQUISITIONS. (26 MARCH 2001).

(Ref. T0795 - May 17, 2006)

THIS IS A TYPE II (CODE 7) SHELF LIFE ITEM

WITH A SHELF LIFE OF 36 MONTHS (EXTENDABLE).

NOTE: PARAGRAPH 5.2.1 OF

MIL-STD-129P W/CHANGE 3 IS APPLICABLE.

(Ref. 99964)

CRITICAL APPLICATION ITEM

I/A/W A-A-50083

REFNO

AMEND NR

TYPE NUMBER:

I/A/W ANSI/ASQC Z1.4-1993

REFNO

AMEND NR

TYPE NUMBER:

I/A/W SPEC NR CCC-C-419G NOT 1

REFNO

AMEND NR G

TYPE NUMBER:

I/A/W SPEC NR CCC-D-950F NOT 2

REFNO

AMEND NR F

TYPE NUMBER:

I/A/W STD NR FED-STD-191A(6) NOT 7

REFNO

AMEND NR A

TYPE NUMBER:

I/A/W STD NR FED-STD-601(7)

REFNO

AMEND NR

TYPE NUMBER:

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 24 51

I/A/W SPEC NR MIL-DTL-32072

REFNO

AMEND NR

TYPE NUMBER:

I/A/W SPEC NR MIL-DTL-32075

REFNO

AMEND NR

TYPE NUMBER:

I/A/W SPEC NR MIL-DTL-43734E NOT 1

REFNO

AMEND NR E

TYPE NUMBER:

I/A/W SPEC NR MIL-F-12224J

REFNO

AMEND NR J

TYPE NUMBER:

I/A/W SPEC NR MIL-I-45208A(2) NOT 2

REFNO

AMEND NR 2

TYPE NUMBER:

I/A/W STD NR MIL-STD-105E NOT 2

REFNO

AMEND NR E

TYPE NUMBER:

I/A/W STD NR MIL-STD-129P(3)

REFNO

AMEND NR P

TYPE NUMBER:

I/A/W STD NR MIL-STD-147D NOT 2

REFNO

AMEND NR D

TYPE NUMBER:

I/A/W STD NR MIL-STD-731A(1) NOT 3

REFNO

AMEND NR A

TYPE NUMBER:

I/A/W SPEC NR MIL-W-530H

REFNO

AMEND NR H

TYPE NUMBER:

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 25 51

I/A/W SPEC NR PPP-B-636J

REFNO

AMEND NR J

TYPE NUMBER:

I/A/W SPEC NR PPP-T-45D NOT 2

REFNO

AMEND NR D

TYPE NUMBER:

CLIN PR PRLI U/I QUANTITY UNIT PRICE TOTAL PRICE

0001 0024396962 0001 PR 100 $ $

NSN UPC SIZE PGC

8430002625295 718020365435 SMALL 01491

DELIVER FOB: See Clause QTY VARIANCE: PLUS See Clause MINUS See Clause INSP/ACCEP POINT: See Clause

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E, 23 MAY 2008

QUP = 024: PRES MTHD = 10: CLNG/DRY = 0: PRESV MAT = 00:

WRAP MAT = 00: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0:

UNIT CONT = 00: OPI = O:

PACK CODE = : PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 -

SUPPLEMENTAL INSTRUCTIONS

PRES/PACK C/C TO ASTM-D-3951

SIGNIFICANT NOTE - 'PALLETIZATION IS REQUIRED

FOR THESE SUPPLIES'.

NOTE: THE FOLLOWING APPLIES TO ALL

NON-MANUFACTURED WOOD PACKAGING MATERIALS:

'All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, 'Guidelines for Regulating Wood Packaging Materials in International Trade.' DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material.

WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 26 51 materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government.'

PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE.

PALLETIZED LOAD DIMENSIONS SHALL NOT EXCEED 43

INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54

INCHES IN HEIGHT (INCLUDING THE PALLET).

THE PALLETIZED LOAD SHALL BE BONDED USING

APPROVED COMMERCIAL BONDING MATERIALS. THE USE

OF METAL BANDING, IN SECURING BOXES TO PALLETS,

IS DISCOURAGED.

PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF

CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM

EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL

BE CLEARLY MARKED TO LIST ALL THE NSN'S

CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE

THAN ONE NSN. AT THE END OF A SIZE RUN, NO MORE

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 27 51

THAN ONE CARTON PER NSN MAY BE SHORT OR OVER THE

SPECIFIED QUANTITY. SAID CARTON SHALL BE

CLEARLY MARKED 'SHORT' OR 'OVER'.

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE

FOLLOWING CLAUSE ALSO

APPLIES:

52.247-9012 - REQUIREMENTS FOR TREATEMENT OF

WOOD PACKAGING MATERIALS

(WPM) - (JULY 2006)

For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence.

PARCEL POST/FREIGHT ADDRESS:

W25G1U

W1BG DEF DIST DEPOT SUSQUE

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 28 51

CLIN PR PRLI U/I QUANTITY UNIT PRICE TOTAL PRICE

0002 0024396962 0002 PR 125 $ $

NSN UPC SIZE PGC

8430002625296 718020365442 LARGE 01491

DELIVER FOB: See Clause QTY VARIANCE: PLUS See Clause MINUS See Clause INSP/ACCEP POINT: See Clause

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E, 23 MAY 2008

MIL-STD-2073 PACKAGING DATA SAME AS PRIOR LINE

PARCEL POST/FREIGHT ADDRESS:

W25G1U

W1BG DEF DIST DEPOT SUSQUE

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

CLIN PR PRLI U/I QUANTITY UNIT PRICE TOTAL PRICE

0003 0024396962 0003 PR 125 $ $

NSN UPC SIZE PGC

8430002625297 718020187655 MEDIUM 01491

DELIVER FOB: See Clause QTY VARIANCE: PLUS See Clause MINUS See Clause INSP/ACCEP POINT: See Clause

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E, 23 MAY 2008

MIL-STD-2073 PACKAGING DATA SAME AS PRIOR LINE

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 29 51

PARCEL POST/FREIGHT ADDRESS:

W25G1U

W1BG DEF DIST DEPOT SUSQUE

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET SPM1C1-10-Q-0033 30 51

A00E01 CAUTION NOTICE - C&T ELECTRONIC INVOICING

(OCT 2007) DSCP

The Directorate of Clothing and Textiles (C&T) requires electronic invoicing on all contracts unless another method is mutually agreed to by the Contractor, the Contracting Officer, the contract administration office, and the payment office.

UTILIZATION OF WIDE AREA WORKFLOW - RECEIPTS AND ACCEPTANCE

(WAWF-RA) IN CONJUNCTION WITH DFARS 252.232-7003, Electronic Submission of Payment Requests.

The Directorate of Clothing and Textiles utilizes VIM-ASAP, which is short for DLA Virtual Item Manager ARN Supply-Chain Automated Processing, to transmit data to WAWF-RA. VIM-ASAP is the only authorized method to electronically process requests for payment to WAWF-RA for the Directorate of Clothing and Textiles. VIM-ASAP will give you visibility of contract information, track production status and print labels. VIM-ASAP pre-populates contract data on your invoices, such as unit price, contract numbers, item numbers, addresses, and many other fields that will save you labor and time.

Advanced Shipment Notifications (ASNs) associated with DFARS clause 252.211-7006, Radio Frequency Identification are sent via VIM-ASAP to WAWF-RA processes.

Please contact the VIM-ASAP help desk at 888-940-7348 to get started today!

For questions about invoice preparation, just call the DFAS Customer Service Resource Center at 1-800-756-4571, or

Check out these resources:

http://www.dfas.mil/contractorpay.html ...under the 'Contractor/Vendor Pay' link.

http://www.dfas.mil/ ... information regarding bill paying process and additional points of contact.

A12A01 52.212-4 CONTRACT TERMS AND CONDITIONS --

COMMERCIAL ITEMS (MAR 2009)FAR SEE ATTACHMENT A FOR MORE DETAIL

A12A02 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED

TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS -- COMMERCIAL

ITEMS (SEP 2009) FAR

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

( ) Alternate I (AUG 2007) of 52.222-50 (22 U.S.C.

7104(g).

(2) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C.

3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer shall check as appropriate.] ( ) (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 06), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402).

( ) (2) 52.203-13, Contractor Code of Business Ethics and Conduct (DEC 2008)(Pub.L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

( )(3) 52.203-15, Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009 (MAR 2009)(Section 1553 of Pub. L. 111-5).(Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

( )(4) 52.204-11, American Recovery and Reinvestment Act - Reporting Requirements (Mar 2009)(Pub.L. 111-5).

( ) (5) 52.219-3, Notice of Total HUBZone Set-Aside (JAN 1999) (15 U.S.C. 657a).

( ) (6) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JUL 2005) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

( ) (7) [Reserved] ( ) (8)(i) 52.219-6, Notice of Total Small Business Set-Aside (JUN 2003) (15 U.S.C. 644).

( ) (ii) Alternate I (OCT 1995) of 52.219-6.

( ) (iii) Alternate II (MAR 2004) of 52.219-6

( ) (9)(i) 52.219-7, Notice of Partial Small Business Set-Aside (JUN 2003) (15 U.S.C. 644).

( ) (ii) Alternate I (OCT 1995) of 52.219-7.

( ) (iii) Alternate II (MAR 2004) of 52.219-7 ( ) (10) 52.219-8, Utilization of Small Business Concerns (MAY 2004) (15 U.S.C. 637(d)(2) and (3)).

( ) (11)(i) 52.219-9, Small Business Subcontracting Plan (APR 2008) (15 U.S.C. 637(d)(4)).

( ) (ii) Alternate I (OCT 2001) of 52.219-9.

( ) (iii) Alternate II (OCT 2001) of 52.219-9.

( ) (12) 52.219-14, Limitations on Subcontracting (DEC 1996) (15 U.S.C. 637(a)(14)).

( ) (13) 52.219-16, Liquidated Damages - Subcontracting Plan (JAN 1999) (15 U.S.C. 637(d)(4)(F)(i)).

( ) (14)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323)(if the offeror elects to waive the adjustment, it shall so indicate in its offer).

( ) (ii) Alternate I (JUN…