SPM1C1-09-R0138.pdf

copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

10 CALENDAR DAYS

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

PAGE OF PAGES

4. TYPE OF SOLICITATION

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

RATING

2. CONTRACT NO. 3. SOLICITATION NO. 5. DATE ISSUED 6. REQUISITION/PURCHASE NO.

7. ISSUED BY CODE 8. ADDRESS OFFER TO (If other than Item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. FOR

INFORMATION

CALL:

A. NAME

B. PHONE / FAX (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SEC. DESCRIPTION PAGE(S) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

I CONTRACT CLAUSES

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

PART IV - REPRESENTATIONS AND INSTRUCTIONS

J LIST OF ATTACHMENTS

K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

L INSTRS., CONDS., AND NOTICES TO OFFERORS

M EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

20 CALENDAR DAYS

30 CALENDAR DAYS

CALENDAR DAYS

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amend-ments to the SOLICITATION for offerors and related documents numbered and dated:

AMENDMENT NO. AMENDMENT NO. DATE

NAME

AND

ADDRESS

OF

OFFEROR

CODE FACILITY 16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

(X) (X)

A

B

C

D

E

F

G

H

SOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECS./WORK STATEMENT

PACKAGING AND MARKING

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS

9. Sealed offers in original and handcarried, in the depository located in until

(Hour) local time

(Date)

CAUTION - LATE Submissions, Modifications, and Withdrawals: Section L, Provision No. 52.214-7 or 52.215-1.

All offers are subject to all terms and conditions contained in this solicitation.

15B. TELEPHONE NO. (Include area code) 15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

STANDARD FORM 33 (Rev. 9-97) Prescribed by GSA FAR (48 CFR) 53.214(c)

NSN 7540-01-152-8064

PREVIOUS EDITION NOT USABLE

41 U.S.C. 253(c) ( )

15A.

PerFORM (DLA)

DATE

SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

AWARD (To be completed by Government)

10 U.S.C. 2304(c) (

C. E-MAIL ADDRESS

15D. FAX NO. 15E. E-MAIL ADDRESS

1 43

SPM1C1-09-R-0138 2009 MAY 21

DEFENSE SUPPLY CENTER PHILADELPHIA

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

SPM1C1

DEFENSE SUPPLY CENTER PHILADELPHIA

C AND T SUPPLY CHAIN

ATTN:DSCP-PB

PO BOX 56667

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

no DSCP, Bldg. 36, Bid Opening Room 2009 JUN 22

FAX Number(s): (215)737-9300

Jillian Randazzo, PCPQCC7

(215) 737-5638 / FAX: (215)737-2486 Jillian.Randazzo@dla.mil

Solicitation Number: SPM1C1-09-R-0138 Page 2 of 43

Schedule of Supplies/Services

Item 0001: Shirt, Man’s, Tuck-in, L/S, Army, White

NSN: 8405-01-554-6206(s)

Prices are to be based on FOB Destination only.

Quantities Unit Price

Base Year: 54,600min $_________

Option Year 1: 54,600min $_________

Option Year 2: 54,600min $_________

Option Year 3: 54,600min $_________

Option Year 4: 54,600min $_________

• The AEQ (Annual Estimated Quantity) is 136,308 per year.

Item 0002: Shirt, Man’s, Tuck-in, S/S, Army, White

NSN: 8410-01-554-9638(s)

Prices are to be based on FOB Destination only.

Quantities Unit Price

Base Year: 62,300min $_________

Option Year 1: 62,300min $_________

Option Year 2: 62,300min $_________

Option Year 3: 62,300min $_________

Option Year 4: 62,300min $_________

• The AEQ (Annual Estimated Quantity) is 155,850 per year.

*NOTE: Under the terms of this solicitation, the Government guarantees to award the minimum quantity of the Army shirts indicated. However, in order to provide maximum flexibility in meeting our customer demands, the Government reserves the right to place orders for a combination of Army Long-sleeve and Short-sleeve shirts up to the maximum of 1,826,250 for the life of the contract.

Solicitation Number: SPM1C1-09-R-0138 Page 3 of 43

*Note: The Contractor shall deliver three (3) unit(s) of the L/S, Shirt, Man’s, Tuck-in, Army, White sizes small, medium and large and three (3) unit(s) of the S/S, Shirt, Man’s, Tuck-in, Army, White sizes small, medium and large within 60 calendar days from the date of this contract to the Government at:

Defense Supply Center Philadelphia Directorate of Clothing & Textiles/COEI/Bldg. 6-D064 ATTN: Jillian Randazzo 700 Robbins Ave Philadelphia, PA 19111 for pre-production tests. The shipping documentation shall contain this contract number. The characteristics that the pre-production samples must meet and the testing requirements are specified elsewhere in this contract.

Shipping Addresses:

VSEQ SC0102

Lion Vallen Industries 340 Moore Ave Building 8 Suffolk, VA 23434-3820

Note: * Delivery orders may require concurrent deliveries. The production lead time for the initial is 120 days and all subsequent orders is 90 days. The Government intends to issue delivery orders that will allow for uninterrupted delivery between orders, when possible. However, failure to do so shall not be cause for any price adjustment under the “Changes” Clause. Contractor will not be required to delivery more than 45,000 L/S & S/S Army shirts a month.

Inspection and Acceptance at Source.

FOB: Destination.

Quality Systems Requirements, DPSCM 4155.3.

Acceleration is authorized only with written permission of PCO.

UPC CODES

SHIRT, MAN'S, L/S, ARMY,

WHITE

PGC UPC NSN Nomen Size

03427 718020444888 8405015546206 SHIRT,MAN'S 13.5X32/33 C

03427 718020525303 8405015558673 SHIRT,MAN'S 14X29 C

03427 718020560823 8405015547115 SHIRT,MAN'S 14X30/31 C

03427 718020055374 8405015548013 SHIRT,MAN'S 14X32/33 C

03427 718020083193 8405015546781 SHIRT,MAN'S 14.5X30/31 C

03427 718020191560 8405015547124 SHIRT,MAN'S 14.5X32/33 C

03427 718020543598 8405015546783 SHIRT,MAN'S 15X29 C

03427 718020058641 8405015547127 SHIRT,MAN'S 15X30/31 C

03427 718020063904 8405015548018 SHIRT,MAN'S 15X32/33 C

03427 718020059983 8405015548384 SHIRT,MAN'S 15X34/35 C

03427 718020458243 8405015546787 SHIRT,MAN'S 15.5X30/31 C

03427 718020119960 8405015547130 SHIRT,MAN'S 15.5X32/33 C

03427 718020495798 8405015548477 SHIRT,MAN'S 15.5X32/33 A

03427 718020493138 8405015549247 SHIRT,MAN'S 15.5X34/35 A

03427 718020087856 8405015548026 SHIRT,MAN'S 15.5X34/35 C

03427 718020113128 8405015548388 SHIRT,MAN'S 15.5X36/37 C

03427 718020066318 8405015546797 SHIRT,MAN'S 16X29 C

Solicitation Number: SPM1C1-09-R-0138 Page 4 of 43

03427 718020471099 8405015549211 SHIRT,MAN'S 16X30/31 A

03427 718020054629 8405015547144 SHIRT,MAN'S 16X30/31 C

03427 718020064697 8405015549256 SHIRT,MAN'S 16X32/33 A

03427 718020564111 8405015548151 SHIRT,MAN'S 16X32/33 C

03427 718020099422 8405015549309 SHIRT,MAN'S 16X34/35 A

03427 718020572789 8405015548391 SHIRT,MAN'S 16X34/35 C

03427 718020584119 8405015548424 SHIRT,MAN'S 16X36/37 C

03427 718020097909 8405015548468 SHIRT,MAN'S 16X38 C

03427 718020462400 8405015546807 SHIRT,MAN'S 16.5X30/31 C

03427 718020531717 8405015549214 SHIRT,MAN'S 16.5X32/33 A

03427 718020442136 8405015549262 SHIRT,MAN'S 16.5X34/35 A

03427 718020560427 8405015548420 SHIRT,MAN'S 16.5X36/37 C

03427 718020462318 8405015549313 SHIRT,MAN'S 16.5X36/37 A

03427 718020464152 8405015548426 SHIRT,MAN'S 16.5X38 C

03427 718020502328 8405015547150 SHIRT,MAN'S 16.5X32/33 C

03427 718020068992 8405015548338 SHIRT,MAN'S 16.5X34/35 C

03427 718020507439 8405015546814 SHIRT,MAN'S 17X32/33 C

03427 718020581828 8405015549219 SHIRT,MAN'S 17X32/33 A

03427 718020459561 8405015549272 SHIRT,MAN'S 17X34/35 A

03427 718020470863 8405015547158 SHIRT,MAN'S 17X34/35 C

03427 718020475936 8405015549317 SHIRT,MAN'S 17X36/37 A

03427 718020594521 8405015548342 SHIRT,MAN'S 17X36/37 C

03427 718020597386 8405015549361 SHIRT,MAN'S 17X38 A

03427 718020087559 8405015546819 SHIRT,MAN'S 17.5X32/33 C

03427 718020530888 8405015549220 SHIRT,MAN'S 17.5X32/33 A

03427 718020571522 8405015549274 SHIRT,MAN'S 17.5X34/35 A

03427 718020158150 8405015547904 SHIRT,MAN'S 17.5X34/35 C

03427 718020514772 8405015549321 SHIRT,MAN'S 17.5X36/37 A

03427 718020509075 8405015548347 SHIRT,MAN'S 17.5X36/37 C

03427 718020560359 8405015546883 SHIRT,MAN'S 18X32/33 C

03427 718020577548 8405015549222 SHIRT,MAN'S 18X32/33 A

03427 718020080796 8405015549279 SHIRT,MAN'S 18X34/35 A

03427 718020481036 8405015547910 SHIRT,MAN'S 18X34/35 C

03427 718020440392 8405015549325 SHIRT,MAN'S 18X36/37 A

03427 718020115351 8405015548363 SHIRT,MAN'S 18X36/37 C

03427 718020596532 8405015549365 SHIRT,MAN'S 18X38 A

03427 718020433530 8405015548422 SHIRT,MAN'S 18X38 C

03427 718020112213 8405015549224 SHIRT,MAN'S 18.5X32/33 A

03427 718020590387 8405015547111 SHIRT,MAN'S 18.5X34/35 C

03427 718020531502 8405015549283 SHIRT,MAN'S 18.5X34/35 A

03427 718020528977 8405015549348 SHIRT,MAN'S 18.5X36/37 A

03427 718020535654 8405015547916 SHIRT,MAN'S 18.5X36/37 C

03427 718020535432 8405015549369 SHIRT,MAN'S 18.5X38 A

03427 718020477862 8405015548368 SHIRT,MAN'S 18.5X38 C

03427 718020081984 8405015547113 SHIRT,MAN'S 19X34/35 C

03427 718020198446 8405015549239 SHIRT,MAN'S 19X34/35 A

03427 718020158075 8405015549295 SHIRT,MAN'S 19X36/37 A

03427 718020513058 8405015547996 SHIRT,MAN'S 19X36/37 C

03427 718020194158 8405015549358 SHIRT,MAN'S 19X38 A

03427 718020111964 8405015548373 SHIRT,MAN'S 19X38 C

03427 718020196992 8405015549240 SHIRT,MAN'S 19.5X34/35 A

03427 718020067063 8405015549306 SHIRT,MAN'S 19.5X36/37 A

03427 718020100159 8405015549244 SHIRT,MAN'S 20X34/35 A

03427 718020496115 8405015549307 SHIRT,MAN'S 20X36/37 A

Solicitation Number: SPM1C1-09-R-0138 Page 5 of 43

UPC

CODES

SHIRT, MAN'S, S/S, ARMY,

WHITE

PGC UPC NSN Nomen Size

03428 718020551111 8405015549638 SHIRT,MAN'S 13-1/2 R C

03428 718020102160 8405015550041 SHIRT,MAN'S 19L ATH

03428 718020112022 8405015549651 SHIRT,MAN'S 14-1/2R C

03428 718020098807 8405015549658 SHIRT,MAN'S 15R CLA

03428 718020079998 8405015549663 SHIRT,MAN'S 15-1/2R C

03428 718020539706 8405015549665 SHIRT,MAN'S 16R CLA

03428 718020092683 8405015549686 SHIRT,MAN'S 16L CLA

03428 718020561004 8405015549695 SHIRT,MAN'S 16-1/2R C

03428 718020558004 8405015549696 SHIRT,MAN'S 16-1/2L C

03428 718020586922 8405015549699 SHIRT,MAN'S 17R CLA

03428 718020536910 8405015549703 SHIRT,MAN'S 17L CLA

03428 718020456461 8405015549705 SHIRT,MAN'S 17-1/2R C

03428 718020097121 8405015549708 SHIRT,MAN'S 17-1/2L C

03428 718020597430 8405015549709 SHIRT,MAN'S 18R CLA

03428 718020066929 8405015549711 SHIRT,MAN'S 18L CLA

03428 718020078021 8405015549713 SHIRT,MAN'S 18-1/2R C

03428 718020473321 8405015549718 SHIRT,MAN'S 18-1/2L C

03428 718020528908 8405015549725 SHIRT,MAN'S 19L CLA

03428 718020457321 8405015549930 SHIRT,MAN'S 15-1/2R A

03428 718020522166 8405015549935 SHIRT,MAN'S 16R ATH

03428 718020544878 8405015549942 SHIRT,MAN'S 16L ATH

03428 718020075983 8405015549953 SHIRT,MAN'S 16-1/2R A

03428 718020591131 8405015549958 SHIRT,MAN'S 16-1/2L A

03428 718020568041 8405015549973 SHIRT,MAN'S 17R ATH

03428 718020527734 8405015549986 SHIRT,MAN'S 17L ATH

03428 718020539133 8405015550001 SHIRT,MAN'S 17-1/2R A

03428 718020451176 8405015550015 SHIRT,MAN'S 17-1/2L A

03428 718020587608 8405015550025 SHIRT,MAN'S 18R ATH

03428 718020197296 8405015550032 SHIRT,MAN'S 18L ATH

03428 718020565774 8405015550036 SHIRT,MAN'S 18-1/2L A

03428 718020505947 8405015549643 SHIRT,MAN'S 14R CLA

Solicitation Number: SPM1C1-09-R-0138 Page 6 of 43

Square Inches Shirt, Man’s, L/S, Army, White

PD07 _01

Type I, Class 1 & 2

Pattern Date: JUNE 30, 2008

Type I, Class 1

Type I, Class

Classic, Long Sleeve

Athletic, Long Sleeve

14X29

2459.79

16/31

2868.296 15X29

2574.34

16X29

2691.152

15.5X33

2875.573

16X33

2936.836

14X31

2520.183

16.5X33

2999.449 14.5X31

2577.803

17/33

3062.524

15X31

2636.005

17.5X33

3126.71 15.5X31

2694.421

18/33

3191.65

16X31

2754.076

18.5X33

3263.349 16.5X31

2815.071

13.5X33

2516.036

15.5X35

3105.452

14X33

2580.623

16/35

3171.996 14.5X33

2638.899

16.5X35

3239.904

15X33

2697.75

17X35

3308.3 15.5X33

2756.798

17.5X35

3377.799

16X33

2817.077

18X35

3448.114 16.5X33

2878.667

18.5X35

3525.117

17X33

2941.218

19X35

3596.112 17.5X33

3004.798

19.5X35

3667.617

18X33

3096.505

20X35

3740.277

156X35

2912.998

16.5X37

3309.097 15.5X35

2977.187

17X37

3378.282

16X35

3042.588

17.5X37

3448.572 16.5X35

3109.296

18X37

3519.749

17X35

3177.061

18.5X37

3597.574 17.5X35

3245.856

19X37

3669.431

18X35

3315.896

19.5X37

3741.681 18.5X35

3391.487

20X37

3815.128

19X35

3461.845

16.5X37

3172.94

17X39

3448.253 17/37

3241.412

18X39

3591.37

17.5X37

3310.92

18.5X39

3669.951 18/37

3381.796

19X39

3742.671

18.5/37

3458.032 19/37

3529.177

18X39

3447.732

18.5X39

3524.614 19/39

3596.544

Solicitation Number: SPM1C1-09-R-0138 Page 7 of 43

Square Inches

Shirt, Man’s, S/S, Army, White

PD07 _01

Pattern Date: JUNE 30, 2008

Type II, Class 1

Type II, Class 2

Classic, Short Sleeve

Athletic, Short Sleeve

13.5R

2111.054

15.5R 2399.568 14R

2177.834

16R 2462.831

14.5R

2238.437

16.5R 2527.587 15R

2299.951

17R 2592.795

15.5R

2361.785

17.5R 2659.249 16R

2425.002

18R 2726.222

16.5R

2489.845 17R

2555.118

17.5R

2621.477 18R

2688.426

18.5R

2762.584

16L

2587.513

16L 2629.487 16.5L

2656.864

16.5L 2698.78

17L

2726.646

17L 2768.519 17.5L

2797.505

17.5L 2839.498

18L

2868.952

18L 2910.985 18.5L

2947.611

18.5L 2989.77

19L

3020.047

19L 3062.24

Solicitation Number: SPM1C1-09-R-0138 Page 8 of 43 Section C

Shirt, Man's, Long Sleeve(Type I), Polyester/Cotton, Army White Shade 521, shall be made in accordance with GL/PD 07-01B dated 30 June 2008

Pattern Date: 30 June 2008

Standard sample of cloth polyester/cotton, Army White Shade 521, under GL/PD 08-01,is available and applicable for shade only under roll number 3781.

ADDITIONAL INFORMATION FOR V-B-871: NO ADDITIONAL INFORMATION FOLLOWS.

(ref. T0696 - May 18, 2006)

ADDITIONAL INFO FOR FED-STD-4 GLOSSARY OF FABRIC IMPERFECTIONS:

REVISION B: 7/29/64; AMENDMENT 2: 9/12/75

NOTICE 1, DATED 10/1/87.

DEV. TO FED. STD. 4B & AM. 2, PAGE 2, SEC.I. PARA. 2.1. IN IMPERFECTION

COMMERCIAL TERMINOLOGY AND GLOSSARY NO. COLUMNS, AFTER SHADE

BAR - 14 INSERT: "SHADED CLOTH-61B".

PAGE 8 PARA. 3.4, GLOSSARY NO. "61A- OFF SHADE", IN "DEFINITION" COLUMN,

DELETE ":SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END". ADD NEW

GLOSSARY NO. "SHADED CLOTH "61B-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE

TO CENTER OR END TO END) WITH THE FOLLOWING DEFINITION: "COLOR

DIFFERENCE BETWEEN THE RESPECTIVE CLOTH AREAS".

PAGE 22, SECTION III, PARAGRAPH 2.1, IN "IMPERFECTION COMMERCIAL

TERMINOLOGY" AND GLOSSARY NO." COLUMNS, AFTER "SHADE BAR-15" INSERT:

"SHADED CLOTH - 62A"

PAGE 27, PARAGRAPH 3.4, GLOSSARY NO. "62-OFF SHADE" IN "DEFINITION"

COLUMN DELETE: "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END".

ADD NEW GLOSSARY NO, "62A-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE TO

CENTER OR END TO END)" WITH THE FOLLOWING DEFINITION: "COLOR DIFFERENCE

BETWEEN THE RESPECTIVE CLOTH AREAS."

DEVIATION FROM FED. STD. 4B, AND AMEND 2:

PG 2, SECTION 1, PARA.2.1, IN "IMPERFECTION COMMERCIAL TERMINOLOGY" AND

"GLOSSARY NUMBER" COLUMNS, AFTER "SHADE BAR-14",INSERT: "SHADED CLOTH

61B".

PG 8, PARA.3.4, GLOSSARY NUMBER "61A-OFF SHADE" IN "DEFINITION" COLUMN,

DELETE, "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END". ADD NEW

GLOSSARY NO."61B SHADED CLOTH "SHADED SIDE TO SIDE, SIDE TO CENTER OR

END TO END" WITH THE FOLLOWING DEFINITION; "COLOR DIFFERENCE BETWEEN THE

RESPECTIVE CLOTH AREAS."

PAGE 22, SECTION III, PARAGRAPH 2.1, IN "IMPERFECTION COMMERCIAL

TERMINOLOGY" AN GLOSSARY NO." COLUMNS, AFTER "SHADE BAR-15"

INSERT: "SHADED CLOTH - 62A"

PAGE 27, PARAGRAPH 3.4, GLOSSARY NO "62-OFF SHADE" IN "DEFINITION"

COLUMN DELETE: "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END".

ADD NEW GLOSSARY NO, "62A-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE TO

CENTER OR END TO END)" WITH THE FOLLOWING DEFINITION: "COLOR DIFFERENCE

BETWEEN THE RESPECTIVE CLOTH AREAS."

Ref. T0202 - 04/04/07)

ADDITIONAL INFORMATION FOR A-A-50135:

INTERIM SPECIFICATION CHANGES TO A-A-50135:

PARAGRAPH 2.1: DELETE AND SUBSTITUTE:

"2.1 CERTIFICATION. THE CONTRACTOR SHALL

CERTIFY AND MAINTAIN SUBSTANTIATING EVIDENCE

THAT THE PRODUCT OFFERED MEETS THE SALIENT

CHARACTERISTICS AND REQUIREMENTS OF THIS

COMMERCIAL ITEM DESCRIPTION AND THAT THE

PRODUCT CONFORMS TO THE PRODUCER'S OWN

DRAWINGS, SPECIFICATIONS, STANDARDS AND

QUALITY ASSURANCE PRACTICES. THE GOVERNMENT

RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH

CONFORMANCE PRIOR TO FIRST DELIVERY AND

THEREAFTER AS MAY BE OTHERWISE PROVIDED

FOR UNDER THE PROVISIONS OF THE CONTRACT.

PARA. 2.2 VISUAL EXAMINATION. LOTS OF CLOTH

SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD

-105. THE INSPECTION LEVEL SHALL BE II. THE LOT

SIZE SHALL BE EXPRESSED IN UNITS OF YARDS. THE

SAMPLE SIZE SHALL BE ONE LINEAR YARD. THE CLOTH

SHALL BE EXAMINED ON THE FACE SIDE FOR THE

FOLLOWING DEFECTS: HOLE, TEAR, RUN OR DROPPED

STITCH; END OUT; MEND; THIN OR UNEVEN AREA;

SLUB, SLUG OR GOUT; PERMANENT CREASE IN CLOTH;

SHADE BAR; STREAK, SPOT OR STAIN; WEIGHT NOT AS

SPECIFIED.

Solicitation Number: SPM1C1-09-R-0138 Page 9 of 43

PARA. 2.3 LENGTH EXAMINATION . DURING THE YARD-

BY-YARD EXAMINATION EACH ROLL IN THE SAMPLE

SHALL BE EXAMINED FOR LENGTH AND WEIGHT. ANY

LENGTH FOUND TO BE LESS THAN THE MINIMUM

SPECIFIED OR MORE THAN 2 YARDS LESS THAN THE

LENGTH MARKED ON THE ROLL TICKET SHALL BE

CONSIDERED A LENGTH DEFECT. IF THE TOTAL OF THE

ACTUAL LENGTHS OF THE ROLLS IS LESS THAN THE

TOTAL OF THE LENGTHS MARKED ON THE ROLL TICKETS,

THE LOT SHALL BE REJECTED."

PAGE 1 PARA 2.2, LINE 5, AFTER " SECTION 16"

DELETE "THE CLOTH SHALL HAVE A MAXIMUM SHRINKAGE

RATE OF 2.0 IN THE WARP AND FILLING DIRECTION."

AND SUBSTITUTE " THE CLOTH SHALL HAVE A MAXIMUM

SHRINKAGE RATE OF 4.0 IN BOTH THE WARP AND

FILLING DIRECTIONS."

ADDITIONAL INFORMATION FOR A-A-50199A DATED 7/31/2006:

SPECIAL NOTE: INTERIM STANDARD SAMPLE FOR FOR FOLIAGE GREEN 504 IS MIL-C-44436, ROLL #3729. (THE FOLIAGE GREEN 502 AREA OF THE PATTERN) AND IS REFERENCED FOR SHADE ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER NOTICE.

FOLIAGE GREEN 504 IS TO BE USED AS SPECIFIED BY CONTRACT. THIS SHADE HAS BEEN APPROVED FOR TYPE I COLOR

STANDARD.

(ref. T1064 - Feb. 27, 2007 SAP 4034641) MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE REPLACES DDD-L-20 (Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

Page 6, TABLE I, "Physical requirements of the Type VI finished label" Under "Tearing strength" delete: "(lb.) minimum" and substitute: "(gms) minimum"

ADDITIONAL INFORMATION FOR MIL-T-43624:

STANDARD SAMPLE FOR CAMOUFLAGE GREEN 483 IS

IDENTIFIED AS ROLL NO. 3523, REFERENCED FOR

SHADE ONLY.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS

MIL-C-44436, ROLL #3729 (THE FOLIAGE GREEN 502

AREA OF THE PATTERN), AND REFERENCED FOR SHADE

ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER

NOTICE.

ADDITIONAL INFORMATION FOR MIL-C-44296:

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER "AND" INSERT "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN "TYPE X-CIRCULAR KNIT SUBSTRATE" AND "CLASS 1" INSERT "TYPE X1- "STITCH-

REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW "TYPE IX" ADD "TYPE X - CIRCULAR KNIT SUBSTRATE" PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD FOLLOWING NEW PARAGRAPH: "2.1.3 OTHER PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE THOSE LISTED IN THE ISSUE OF THE DODISS SPECIFIED IN THE SOLICITATION. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT LISTED IN THE DODISS SHALL BE THE ISSUES OF THE NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT ON THE DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS

(AATCC), P.O. BOX 12215, TRIANGLE PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH: "3.1.2.10 TYPE X. TYPE X SHALL BE A CIRCULAR KNIT. WHEN SPECIFIED (SEE

6.2), THE FACE SIDE SHALL BE NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE FOLLOWING: "3.1.2.11 TYPE X1. TYPE X1 SHALL BE STITCH- REINFORCED NONWOVEN WHEREBY A SERIES OF CHAINSTITCHING IS SEWN IN THE MACHINE DIRECTION OF THE SUBSTRATE IN ORDER TO

REINFORCE THE NONWOVEN CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS. ADD THE FOLLOWING NEW TABLE AFTER TABLE VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

ADHESIVE) STRENGTH

OZ/SQ/YD. LBS. (MIN.

MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.: AFTER TABLE"V111" ADD NEW TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

BREAKING STRENGTH

WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

FORCEMENT

A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE MULTIFILAMENT THREAD USING CHAINSTITCH STITCH TYPE WITH

CHAINSTITCH LOOPS ON FUSIBLE SIDE TO PROTECT FROM UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

Solicitation Number: SPM1C1-09-R-0138 Page 10 of 43

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND SUBSTITUTE "(EXCEPT TYPE IX WHEN USED AS FUSIBLE SEAM TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND SUBSTITUTE "20". LINE 24, DELETE "45" AND SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST METHOD COLUMN, LINES 2 AND 3 DELETE "1600" AND SUBSTITUTE "AATCC 20".

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH PROCEDURE (INITIAL AND AFTER LAUNDERING/DRY CLEANING). DELETE THE FIRST AND SECOND SENTENCES IN THEIR ENTIRETY AND SUBSTITUTE: "CUT A 12 INCH WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR CONTRACT USE (SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND STAY APPLICATION FOR LARGE OR SMALL PART FUSIBLES AND IS INTENDED TO PROVIDE VERTICAL STABILITY AND ABRASION

RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE PROCEDURE. INSERT THE FOLLOWING BETWEEN THE FIRST AND SECOND SENTENCES: "IN SOME CASES, OUTERSHELL SAMPLES REPRESENTATIVE OF SEPARATE PRODUCTION LOTS MAY BE

USED TO DETERMINE IF DIFFERENT FINISHES MAY AFFECT BONDING STRENGTH."

(ref. T0998 - 5/23/06)

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

.PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER

"AND" INSERT "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN

"TYPE X-CIRCULAR KNIT SUBSTRATE" AND "CLASS 1"

INSERT "TYPE X1- "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW

"TYPE IX" ADD "TYPE X - CIRCULAR KNIT SUBSTRATE"

PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD

FOLLOWING NEW PARAGRAPH: "2.1.3 OTHER

PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A

PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED

HEREIN. UNLESS OTHERWISE SPECIFIED,THE ISSUES OF

THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE

THOSE LISTED IN THE ISSUE OF THE DODISS

SPECIFIED IN THE SOLICITATION. UNLESS OTHERWISE

SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT

LISTED IN THE DODISS SHALL BE THE ISSUES OF THE

NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT ON THE

DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND

COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS

QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE

ADDRESSED TO AMERICAN ASSOCIATION OF TEXTILE

CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215,

TRIANGLE PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH:

"3.1.2.10 TYPE X. TYPE X SHALL BE A CIRCULAR

KNIT. WHEN SPECIFIED (SEE 6.2), THE FACE SIDE

SHALL BE NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE

FOLLOWING:

"3.1.2.11 TYPE X1. TYPE X1 SHALL BE STITCH-

REINFORCED NONWOVEN WHEREBY A SERIES OF

CHAINSTITCHING IS SEWN IN THE MACHINE

DIRECTION OF THE SUBSTRATE IN ORDER TO

REINFORCE THE NONWOVEN CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS.

ADD THE FOLLOWING NEW TABLE AFTER TABLE VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

. ADHESIVE) STRENGTH

. OZ/SQ/YD. LBS. (MIN.

. MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.:

AFTER TABLE"V111" ADD NEW TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

. BREAKING STRENGTH

. WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

. FORCEMENT

. A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING

PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE

MULTIFILAMENT THREAD USING CHAINSTITCH STITCH

Solicitation Number: SPM1C1-09-R-0138 Page 11 of 43

TYPE WITH CHAINSTITCH LOOPS ON FUSIBLE SIDE TO

PROTECT FROM UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND

SUBSTITUTE "(EXCEPT TYPE IX WHEN USED AS FUSIBLE

SEAM TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND

SUBSTITUTE "20". LINE 24, DELETE "45" AND

SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST

METHOD COLUMN, LINES 2 AND 3 DELETE "1600" AND

SUBSTITUTE "AATCC 20".

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH

PROCEDURE (INITIAL AND AFTER LAUNDERING/DRY

CLEANING). DELETE THE FIRST AND SECOND SENTENCES

IN THEIR ENTIRETY AND SUBSTITUTE: "CUT A 12 INCH

WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE

OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR

CONTRACT USE (SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE

FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS

HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND

STAY APPLICATION FOR LARGE OR SMALL PART

FUSIBLES AND IS INTENDED TO PROVIDE VERTICAL

STABILITY AND ABRASION RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE

PROCEDURE. INSERT THE FOLLOWING BETWEEN THE

FIRST AND SECOND SENTENCES: "IN SOME CASES,

OUTERSHELL SAMPLES REPRESENTATIVE OF SEPARATE

PRODUCTION LOTS MAY BE USED TO DETERMINE IF

DIFFERENT FINISHES MAY AFFECT BONDING STRENGTH."

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND

STORAGE - DATED

19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIP- MENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT

HAND LETTERED, ON THE CONTAINER.

(Ref. T0303 - May, 2006)

ADDITIONAL INFORMATION:

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.

DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS.

PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000

(Ref. T0219 - 05/17/07)

Shirt, Man's, Short Sleeve (Type II), Polyester/Cotton, Army White shade 521, shall be made in accordance with GL/PD 07-01B dated 30 June 2008.

Pattern Date: 30 June 2008 Standard sample of cloth polyester/cotton, Army White shade 521, under GL/PD 08-01, is available and applicable for shade only under roll number 3781.

ADDITIONAL INFORMATION FOR V-B-871: NO ADDITIONAL INFORMATION FOLLOWS.

(ref. T0696 - May 18, 2006)

ADDITIONAL INFO FOR FED-STD-4 GLOSSARY OF FABRIC IMPERFECTIONS:

REVISION B: 7/29/64; AMENDMENT 2: 9/12/75

NOTICE 1, DATED 10/1/87.

DEV. TO FED. STD. 4B & AM. 2, PAGE 2, SEC.I. PARA. 2.1. IN IMPERFECTION

COMMERCIAL TERMINOLOGY AND GLOSSARY NO. COLUMNS, AFTER SHADE

BAR - 14 INSERT: "SHADED CLOTH-61B".

PAGE 8 PARA. 3.4, GLOSSARY NO. "61A- OFF SHADE", IN "DEFINITION" COLUMN,

DELETE ":SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END". ADD NEW

GLOSSARY NO. "SHADED CLOTH "61B-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE

Solicitation Number: SPM1C1-09-R-0138 Page 12 of 43

TO CENTER OR END TO END) WITH THE FOLLOWING DEFINITION: "COLOR

DIFFERENCE BETWEEN THE RESPECTIVE CLOTH AREAS".

PAGE 22, SECTION III, PARAGRAPH 2.1, IN "IMPERFECTION COMMERCIAL

TERMINOLOGY" AND GLOSSARY NO." COLUMNS, AFTER "SHADE BAR-15" INSERT:

"SHADED CLOTH - 62A"

PAGE 27, PARAGRAPH 3.4, GLOSSARY NO. "62-OFF SHADE" IN "DEFINITION"

COLUMN DELETE: "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END".

ADD NEW GLOSSARY NO, "62A-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE TO

CENTER OR END TO END)" WITH THE FOLLOWING DEFINITION: "COLOR DIFFERENCE

BETWEEN THE RESPECTIVE CLOTH AREAS."

DEVIATION FROM FED. STD. 4B, AND AMEND 2:

PG 2, SECTION 1, PARA.2.1, IN "IMPERFECTION COMMERCIAL TERMINOLOGY" AND

"GLOSSARY NUMBER" COLUMNS, AFTER "SHADE BAR-14",INSERT: "SHADED CLOTH

61B".

PG 8, PARA.3.4, GLOSSARY NUMBER "61A-OFF SHADE" IN "DEFINITION" COLUMN,

DELETE, "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END". ADD NEW

GLOSSARY NO."61B SHADED CLOTH "SHADED SIDE TO SIDE, SIDE TO CENTER OR

END TO END" WITH THE FOLLOWING DEFINITION; "COLOR DIFFERENCE BETWEEN THE

RESPECTIVE CLOTH AREAS."

PAGE 22, SECTION III, PARAGRAPH 2.1, IN "IMPERFECTION COMMERCIAL

TERMINOLOGY" AN GLOSSARY NO." COLUMNS, AFTER "SHADE BAR-15"

INSERT: "SHADED CLOTH - 62A"

PAGE 27, PARAGRAPH 3.4, GLOSSARY NO "62-OFF SHADE" IN "DEFINITION"

COLUMN DELETE: "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END".

ADD NEW GLOSSARY NO, "62A-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE TO

CENTER OR END TO END)" WITH THE FOLLOWING DEFINITION: "COLOR DIFFERENCE

BETWEEN THE RESPECTIVE CLOTH AREAS."

Ref. T0202 - 04/04/07)

ADDITIONAL INFORMATION FOR A-A-50135:

INTERIM SPECIFICATION CHANGES TO A-A-50135:

PARAGRAPH 2.1: DELETE AND SUBSTITUTE:

"2.1 CERTIFICATION. THE CONTRACTOR SHALL

CERTIFY AND MAINTAIN SUBSTANTIATING EVIDENCE

THAT THE PRODUCT OFFERED MEETS THE SALIENT

CHARACTERISTICS AND REQUIREMENTS OF THIS

COMMERCIAL ITEM DESCRIPTION AND THAT THE

PRODUCT CONFORMS TO THE PRODUCER'S OWN

DRAWINGS, SPECIFICATIONS, STANDARDS AND

QUALITY ASSURANCE PRACTICES. THE GOVERNMENT

RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH

CONFORMANCE PRIOR TO FIRST DELIVERY AND

THEREAFTER AS MAY BE OTHERWISE PROVIDED

FOR UNDER THE PROVISIONS OF THE CONTRACT.

PARA. 2.2 VISUAL EXAMINATION. LOTS OF CLOTH

SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD

-105. THE INSPECTION LEVEL SHALL BE II. THE LOT

SIZE SHALL BE EXPRESSED IN UNITS OF YARDS. THE

SAMPLE SIZE SHALL BE ONE LINEAR YARD. THE CLOTH

SHALL BE EXAMINED ON THE FACE SIDE FOR THE

FOLLOWING DEFECTS: HOLE, TEAR, RUN OR DROPPED

STITCH; END OUT; MEND; THIN OR UNEVEN AREA;

SLUB, SLUG OR GOUT; PERMANENT CREASE IN CLOTH;

SHADE BAR; STREAK, SPOT OR STAIN; WEIGHT NOT AS

SPECIFIED.

PARA. 2.3 LENGTH EXAMINATION . DURING THE YARD-

BY-YARD EXAMINATION EACH ROLL IN THE SAMPLE

SHALL BE EXAMINED FOR LENGTH AND WEIGHT. ANY

LENGTH FOUND TO BE LESS THAN THE MINIMUM

SPECIFIED OR MORE THAN 2 YARDS LESS THAN THE

LENGTH MARKED ON THE ROLL TICKET SHALL BE

CONSIDERED A LENGTH DEFECT. IF THE TOTAL OF THE

ACTUAL LENGTHS OF THE ROLLS IS LESS THAN THE

TOTAL OF THE LENGTHS MARKED ON THE ROLL TICKETS,

THE LOT SHALL BE REJECTED."

PAGE 1 PARA 2.2, LINE 5, AFTER " SECTION 16"

DELETE "THE CLOTH SHALL HAVE A MAXIMUM SHRINKAGE

RATE OF 2.0 IN THE WARP AND FILLING DIRECTION."

AND SUBSTITUTE " THE CLOTH SHALL HAVE A MAXIMUM

SHRINKAGE RATE OF 4.0 IN BOTH THE WARP AND

FILLING DIRECTIONS."

ADDITIONAL INFORMATION FOR A-A-50199A DATED 7/31/2006:

SPECIAL NOTE: INTERIM STANDARD SAMPLE FOR FOR FOLIAGE GREEN 504 IS MIL-C-44436, ROLL #3729. (THE FOLIAGE GREEN 502 AREA OF THE PATTERN) AND IS REFERENCED FOR SHADE ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER NOTICE.

FOLIAGE GREEN 504 IS TO BE USED AS SPECIFIED BY CONTRACT. THIS SHADE HAS BEEN APPROVED FOR TYPE I COLOR

STANDARD.

(ref. T1064 - Feb. 27, 2007 SAP 4034641)

Solicitation Number: SPM1C1-09-R-0138 Page 13 of 43 MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE REPLACES DDD-L-20 (Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

Page 6, TABLE I, "Physical requirements of the Type VI finished label" Under "Tearing strength" delete: "(lb.) minimum" and substitute: "(gms) minimum"

ADDITIONAL INFORMATION FOR MIL-T-43624:

STANDARD SAMPLE FOR CAMOUFLAGE GREEN 483 IS

IDENTIFIED AS ROLL NO. 3523, REFERENCED FOR

SHADE ONLY.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS

MIL-C-44436, ROLL #3729 (THE FOLIAGE GREEN 502

AREA OF THE PATTERN), AND REFERENCED FOR SHADE

ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER

NOTICE.

ADDITIONAL INFORMATION FOR MIL-C-44296:

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER "AND" INSERT "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN "TYPE X-CIRCULAR KNIT SUBSTRATE" AND "CLASS 1" INSERT "TYPE X1- "STITCH-

REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW "TYPE IX" ADD "TYPE X - CIRCULAR KNIT SUBSTRATE" PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD FOLLOWING NEW PARAGRAPH: "2.1.3 OTHER PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE THOSE LISTED IN THE ISSUE OF THE DODISS SPECIFIED IN THE SOLICITATION. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT LISTED IN THE DODISS SHALL BE THE ISSUES OF THE NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT ON THE DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS

(AATCC), P.O. BOX 12215, TRIANGLE PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH: "3.1.2.10 TYPE X. TYPE X SHALL BE A CIRCULAR KNIT. WHEN SPECIFIED (SEE

6.2), THE FACE SIDE SHALL BE NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE FOLLOWING: "3.1.2.11 TYPE X1. TYPE X1 SHALL BE STITCH- REINFORCED NONWOVEN WHEREBY A SERIES OF CHAINSTITCHING IS SEWN IN THE MACHINE DIRECTION OF THE SUBSTRATE IN ORDER TO

REINFORCE THE NONWOVEN CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS. ADD THE FOLLOWING NEW TABLE AFTER TABLE VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

ADHESIVE) STRENGTH

OZ/SQ/YD. LBS. (MIN.

MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.: AFTER TABLE"V111" ADD NEW TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

BREAKING STRENGTH

WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

FORCEMENT

A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE MULTIFILAMENT THREAD USING CHAINSTITCH STITCH TYPE WITH

CHAINSTITCH LOOPS ON FUSIBLE SIDE TO PROTECT FROM UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND SUBSTITUTE "(EXCEPT TYPE IX WHEN USED AS FUSIBLE SEAM TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND SUBSTITUTE "20". LINE 24, DELETE "45" AND SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST METHOD COLUMN, LINES 2 AND 3 DELETE "1600" AND SUBSTITUTE "AATCC 20".

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH PROCEDURE (INITIAL AND AFTER LAUNDERING/DRY CLEANING). DELETE THE FIRST AND SECOND SENTENCES IN THEIR ENTIRETY AND SUBSTITUTE: "CUT A 12 INCH WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR CONTRACT USE (SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND STAY APPLICATION FOR LARGE OR SMALL PART FUSIBLES AND IS INTENDED TO PROVIDE VERTICAL STABILITY AND ABRASION

RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE PROCEDURE. INSERT THE FOLLOWING BETWEEN THE FIRST AND SECOND SENTENCES: "IN SOME CASES, OUTERSHELL SAMPLES REPRESENTATIVE OF SEPARATE PRODUCTION LOTS MAY BE

USED TO DETERMINE IF DIFFERENT FINISHES MAY AFFECT BONDING STRENGTH."

(ref. T0998 - 5/23/06)

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER

"AND" INSERT "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN

"TYPE X-CIRCULAR KNIT SUBSTRATE" AND "CLASS 1"

INSERT "TYPE X1- "STITCH-REINFORCED NONWOVEN".

Solicitation Number: SPM1C1-09-R-0138 Page 14 of 43

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW

"TYPE IX" ADD "TYPE X - CIRCULAR KNIT SUBSTRATE"

PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD

FOLLOWING NEW PARAGRAPH: "2.1.3 OTHER

PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A

PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED

HEREIN. UNLESS OTHERWISE SPECIFIED,THE ISSUES OF

THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE

THOSE LISTED IN THE ISSUE OF THE DODISS

SPECIFIED IN THE SOLICITATION. UNLESS OTHERWISE

SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT

LISTED IN THE DODISS SHALL BE THE ISSUES OF THE

NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT ON THE

DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND

COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS

QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE

ADDRESSED TO AMERICAN ASSOCIATION OF TEXTILE

CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215,

TRIANGLE PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH:

"3.1.2.10 TYPE X. TYPE X SHALL BE A CIRCULAR

KNIT. WHEN SPECIFIED (SEE 6.2), THE FACE SIDE

SHALL BE NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE

FOLLOWING:

"3.1.2.11 TYPE X1. TYPE X1 SHALL BE STITCH-

REINFORCED NONWOVEN WHEREBY A SERIES OF

CHAINSTITCHING IS SEWN IN THE MACHINE

DIRECTION OF THE SUBSTRATE IN ORDER TO

REINFORCE THE NONWOVEN CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS.

ADD THE FOLLOWING NEW TABLE AFTER TABLE VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

. ADHESIVE) STRENGTH

. OZ/SQ/YD. LBS. (MIN.

. MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.:

AFTER TABLE"V111" ADD NEW TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

. BREAKING STRENGTH

. WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

. FORCEMENT

. A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING

PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE

MULTIFILAMENT THREAD USING CHAINSTITCH STITCH

TYPE WITH CHAINSTITCH LOOPS ON FUSIBLE SIDE TO

PROTECT FROM UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND

SUBSTITUTE "(EXCEPT TYPE IX WHEN USED AS FUSIBLE

SEAM TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND

SUBSTITUTE "20". LINE 24, DELETE "45" AND

SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST

METHOD COLUMN, LINES 2 AND 3 DELETE "1600" AND

SUBSTITUTE "AATCC 20".

.PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH

PROCEDURE (INITIAL AND AFTER LAUNDERING/DRY

CLEANING). DELETE THE FIRST AND SECOND SENTENCES

IN THEIR ENTIRETY AND SUBSTITUTE: "CUT A 12 INCH

WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE

OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR

CONTRACT USE (SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE

Solicitation Number: SPM1C1-09-R-0138 Page 15 of 43

FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS

HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND

STAY APPLICATION FOR LARGE OR SMALL PART

FUSIBLES AND IS INTENDED TO PROVIDE VERTICAL

STABILITY AND ABRASION RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE

PROCEDURE. INSERT THE FOLLOWING BETWEEN THE

FIRST AND SECOND SENTENCES: "IN SOME CASES,

OUTERSHELL SAMPLES REPRESENTATIVE OF SEPARATE

PRODUCTION LOTS MAY BE USED TO DETERMINE IF

DIFFERENT FINISHES MAY AFFECT BONDING STRENGTH."

DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS.

PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000

(Ref. T0219 - 05/17/07) MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND

STORAGE - DATED

19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIP- MENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT

HAND LETTERED, ON THE CONTAINER.

(Ref. T0303 - May, 2006)

ADDITIONAL INFORMATION:

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.

LABELING/PACKAGING FOR DRESS CLOTHING ITEMS

The following list shows items which require labeling on the packaging in accordance with the attached graphics depicting the DSCP logo and a product line name. Although labeling is required on all of these items, it may not be required on all packaging. For example, while skirts are required to be packaged in a poly bag, those bags do not need to be printed with the DSCP logo and product line name. However, poly bags for shirts and sweaters must be printed with the DSCP logo and product name.

ITEM

POLY BAG

SEWN-IN

LABELS

HANG TAG

BOX

All-Weather Coats No Yes Yes No Jackets No Yes Yes No Overcoats (Peacoats) No Yes Yes No Sweaters Yes Yes No No Jumpers No Yes Yes No Skirts No Yes Yes No Coveralls No Yes Yes No Shirts Yes Yes No No Garrison Caps Yes Yes Yes No Berets Yes Yes No No Trousers, Utility No Yes Joker Tag No Slacks, Utility No Yes Joker Tag No

The following is a chart that shows the branch of service and the correlating product line name to be used.

SERVICE PRODUCT LINE NAME

Army Garrison Collection Navy Quarterdeck Collection Air Force Wings Collection Marine Corps Valor Collection Coast Guard Guardian Collection

Solicitation Number: SPM1C1-09-R-0138 Page 16 of 43 Common Service (used by 2 or more services)

Defender Collection

PMS color numbers are as follows:

PMS Color Numbers DSCP website PMS # 287U (Blue) Product line name (e.g., Garrison Collection) PMS # 287U (Blue) Tag line (“…the perfect fit”) PMS # 187U (Red) DSCP logo PMS # 187U (Red) – 2nd & 4th vertical stripes in shield; PMS

# 287U (Blue) – outline of eagle and wings, background of star in shield, DSCP lettering; and White (no PMS # assigned)

- 1st, 3rd & 5th vertical stripes in shield, star in shield, eagle’s head.

Wording (including “Made in USA”) on reverse of hang tag and poly bag

PMS # 287U (Blue)

The following are the specifics regarding sewn-in labels, hang tags, and printed poly bags. It is noted that the

DSCP logo and product line names are to be recreated from the graphics shown later in this document, so that the logo and the font, font size, and size of the logo are exactly as shown. Further, it is noted that the DSCP website is to be italicized.

POLY BAGS

Dimension For shirts and sweaters: White background, 3” H completely surrounding the bag. Position white background approx 1/3 of the way up from bottom of bag. For garrison caps: white background, 3”H x approx 6” W (front of bag) and 8”W (reverse of bag), positioned lengthwise on the bag approx 3” (front of bag) and 2” (reverse of bag) from closed end of bag and centered top-to-bottom. For berets: white background, 3”H x 6” W (front of bag) and 8” W (reverse of bag);

centered on the front and approx 2” below the open end of the reverse;

positioned with the open end of the bag above the DSCP logo on both the front and reverse sides. Insert the beret so that the combination label is visible through the reverse side of the bag.

Packaging For dress shirts only: commercial packaging (including pins, cardboard backing, plastic collar stands, etc.)

Self-Adhesive Label For sweaters: size and NSN must be printed in black ink on a self-adhesive label approximately 1 ½” W x ¾” H, affixed on the bottom right hand corner of front of poly bag, below the white background with the DSCP logo and product line name. Approx fonts: Size – 14 point; NSN – 10 point. The size shall be indicated by the letters S, M, L, XL, etc, followed by the required numerical size – for example, M (38-40). For garrison caps: replace paper identification label (required to be placed inside the poly bag) with a self-adhesive label of the same approx size and containing the same information. Affix the label on the lower right corner of the front of poly bag, below the white background with the DSCP logo and product line name. For utility slacks and trousers: self-adhesive commercial leg strip with DSCP logo/website and garment size.

Solicitation Number: SPM1C1-09-R-0138 Page 17 of 43

SEWN-IN LABELS

Small Label1 Large Label2

Label Dimension 2 ¾” W x 1 5/8” H or 1 ½ “ W x 2 “ H

3” W x 3” H

Label Color White White

Border N/A 4 ½ point, PMS # 287U (Blue), ¼” from all edges

Notes: 1 For all items other than those listed in note 2. Use 2 ¾” W x 1 5/8” H for shirts with double yoke; use 1 ½” W x 2 1/8” H for shirts with without a double yoke.

2 For All-Weather Coats, Overcoats (Peacoats), and Jackets The contract requirement for labels and packaging other than DSCP labeling and packaging remains as specified in the spec or CID except as noted. Stitch the DSCP labels as follows: for skirts, trousers and slacks, and shirts with a double yoke, stitch on both ends; for Coats, Overcoats, Jackets, and Jumpers, stitch on all four sides.

LABEL PLACEMENT

Item Placement

Shirts For shirts with a double yoke: the small size DSCP label shall be centered on the inside of the double yoke below the collar, and must be visible through the poly bag when commercially packaged. The size/NSN label shall be centered and caught in the double yoke seam, beneath the DSCP label. For shirts without a double yoke:

the small size DSCP label shall be looped and be centered and caught in the collar seam, on top of, but not attached to, the size/NSN label. The product line name will have to be stacked in order to fit this smaller sized label. The size/NSN label shall be approx 1 ½ “ W x 2 ¾ ” H, printed in the required font size, centered and stitched in collar seam underneath, but not attached to, the DSCP label, so that it extends beyond the bottom of the DSCP label and is completely visible.

All-Weather Coats The large size DSCP label shall be centered and stitched on the left facing, approximately 10”-12” above the bottom edge. If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

Overcoats (Peacoats) The large size DSCP label shall be centered and stitched in the coat, approximately 1” from the neck seam. If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

Skirts The small size DSCP label shall be stitched on the liner, approximately 2” down from the waistband and ¼” from the edge of the liner; if there is no liner, stitch the label on the outside back ply of the pocketing, slightly above the combination label.

Alternatively, the label may be looped and caught in the inside waistband seam.

Sweaters The small size DSCP label shall be looped and be centered and stitched in the collar seam, with the combination label information printed on the reverse. The size and NSN shall be printed on a self-adhesive label, approximately 1 ½” H x ¾” W, and shall be placed on the poly bag in the lower right-hand corner of the bag.

Jackets (including utility jackets)

The large size DSCP label shall be centered and stitched in both the jacket and the liner (if required), approximately 1” from the neck seam. If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

Jumpers The small size DSCP label shall be centered and stitched approximately 1” from the neck seam. Stitch the size/combination label just beneath the DSCP label.

Trousers and Slacks (utility trousers and slacks only)

The small size DSCP label shall be stitched on the waistband (if sufficiently wide) or outside back ply of the pocketing (if applicable).

Garrison Caps The small size DSCP label shall be stitched on the inside of the cap, on the opposite side from the combination label.

Berets The small size DSCP label shall be stitched on the inside of the beret, slightly above the combination label.

Solicitation Number: SPM1C1-09-R-0138 Page 18 of 43

PLEASE NOTE THAT SEWN-IN LABELS (LARGE AND SMALL) ARE TO BE WOVEN LABELS; PRINTED

LABELS ARE NOT PERMITTED FOR THE DSCP LABELS.

SMALL SIZE DSCP SEWN-IN LABELS ARE REQUIRED FOR ALL SHIRTS, REGARDLESS OF SHIPPING

DESTINATION.

HANG TAGS1

Tag Dimension 4” H x 3” W

Tag Color White Tag Spec 8 point weight, coated on both sides Border 4 ½ point, PMS # 287U (Blue), front and reverse, ¼” from all edges Note: 1…