Amendment 0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE PAGE F PAGES

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR No., street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

O

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting and Appropriation Data (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

(X) A. (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN

THE CONTRACT ORDER NO. IN ITEM 10A.

B. VE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES ( such as changes in paying office, appropriation date, etc .) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. REEMENT IS ENTERED INTO

PURSUANT TO AUTHORITY OF:

D. HER (Specify type of modification and authority)

THIS CHANGE ORDER IS ISSUED PURSUANT TO:

THE ABO

THIS SUPPLEMENTAL AG

OT

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF SIGNER (Type or print)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

BY

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Amendment 0003 SPM1C1-09-R-0087 Page 2 of 7

INTERIM SPECIFICATION CHANGE TO MIL-S-24948A:

PAGE 6, PARA.3.3.3, LINE 6, AFTER THIRD

SENTENCE, ADD "AS AN ALTERNATE A POLYAMIDE

PASTE DOT FUSIBLE ADHESIVE MAY BE USED IN

LIEU OF THE POLYESTER PASTE DOT FUSIBLE

ADHESIVE."

INTERIM CHANGES TO MIL-S-24948 (PART 1)

PAGE 2, PARA 1.2.3 SIZES., UNDER BODY TYPE LIN

3, AFTER MISSES, DELETE "NO DESIGNATION", AND

SUBSTITUTE, "M".

ADD THE FOLLOWING SIZES"22,24,26" TO SIZE SCHE

ULE FOR "MISSES" FOR ALL LENGHTS; SIZES "20,22

24,26" TO SIZE SCHEDULE FOR "WOMEN'S" FOR ALL

LENGTHS, AND SIZES "18,20,22, 24, 26" TO SIZE

SCHEDULE FOR "JUNIOR'S" FOR ALL LENGHT'S

PAGE 3. PARA 2.1.1, UNDER "SPECIFICATIONS

MILITARY" DELETE "MIL-C-87059 - CLOTH, NYLON,

TRICOT".

PAGE 3, PARA. 2.1.1, UNDER FEDERAL SPECIFICATION

ADD *A-A-52106-CLOTH, TWILL OR PLAIN WEAVE

POLYESTER AND POLYESTER BLEND). UNDER

MILITARY SPECIFICATIONS , DELETE *MIL-C-43718

CLOTH, POLYESTER, POLYESTER AND COTTON AND

RAYON FOR POCKETS

PAGE 3,PARA. 2.1.1, UNDER SPECIFICATION MILITARY

DELETE *MIL-C-29127-CLOTH, TWILL, POLYESTER/COT-

ON (CREASE RESISTANT FINISH))

PAGE 4, 2.1.1, UNDER *SPECIFICATIONS, MILITARY

DELETE *MIL-STD-105-SAMPLING PROCEDURE AND

TABLE FOR INSPECTION BY ATTRIBUTES) AND SUB

STITUTE “ANSI/ASQC Z1.4-Sampling Procedures and Tables for inspection by Atributes”.

PAGE 4. 2.1.2 UNDER NON GOVERNMENT PUBLIC-

ATIONS, ADD *AMERICAN SOCIETY FOR QUALITY

CONTROL- ANSI/ASQC Z1.4 - SAMPLING PROCED-

URES AND TABLES FOR INSPECTION BY ATTRIB-

UTES

PAGE 4, PARA 2.1.1 UNDER MILITARY INSERT "MIL-

STD-984 PROVISIONS FOR SIZE LABELING FOR WOMEN'S

UNIFORM CLOTHING".

PAGE 5, PARA. 2.1.2, AFTER *TECHNICAL MANUAL@

CHEMISTS AND COLORISTS) ADD THE FOLLOWING

METHOD NO.15-1989 COLORFASTNESS TO PERSPIRATION

METHOD NO. 20A-1990 - FIBER IDENTIFICATION

METHOD NO. 61 TEST 3A-1989 COLORFASTNESS TO

. LAUNDERING (3 CYCLES)

METHOD NO. 81- PH

METHOD NO. 132-1989 COLORFASTNESS TO DRY

CLEANING

Amendment 0003 SPM1C1-09-R-0087 Page 3 of 7

AMERICAN SOCIETY FOR TESTING AND MATERIALS

(ASTM)

ASTM D3776-1985 (OPT. C) -WEIGHT

ASTM D3787-1989 L BURSTING STRENGTH (MIN)

ASTM D3887-1980 L YARNS PER INCH

(COPIES SHOULD BE OBTAINED FROM THE AMER-

ICAN SOCIETY FOR TESTING AND MATERIALS OF

100 BARR HARBOR DRIVE, WEST CONSHOCKEN

PA 19428-2959)

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

ANSI/ASQC-Z1.4 L SAMPLING PROCEDURES AND TABLES

FOR INSPECTION BY ATTRIBUTES ANSI/ASQC-Z1.4L

SAMPLING PROCEDURES AND TABLES

(COPIES SHOULD BE OBTAINED FROM THE AMERIC

AN SOCIETY FOR QUALITY CONTROL P.O. BOX 3005

611 EAST WISCONSIN AVENUE, MILWAUKEE.

WI 532201-4606))

PAGE 5 PARAGRAPH 3.3.1.2 DELETE IN ITS ENTIRETY,

USE A 65% POLYESTER/35% COTTON CLOTH FOR WHITE

SHADE 3053, CLASS 2, OF NCTRF P/D 2-90

PAGE 5 PARAGRAPH 3.3.1.4 DELETE IN ITS ENTIRETY,

USE A 65% POLYESTER/35% COTTON CLOTH FOR KHAKI

SHADE 3729, CLASS 2, OF NCTRF P/D 2-90

PAGE 6.PARA.3.3.2.1,LINE 3,DELETE*MIL-C-437I8

AND SUBSTITUTE *A-A-52106, EXCEPT THE FIBER

CONTENT OF THE SLACKS SHALL BE POLYESTER

BLEND WITH A MINIMUM COTTON CONTENT OF 35%)

PAGE 6, PARA. 3.3.2.2, "DELETE IN ITS ENTIRETY

AND SUBSTITUTE THE FOLLOWING:

"PARA 3.3.2.2 SLACK LINER: THE LINING FABRIC

SHALL BE EITHER A WARP OR CIRCULAR KNIT CONTAIN-

ING CONTINOUS FILAMEMT POLYESTER YARN. THE

CIRCULAR KNIT CLOTH SHALL BE SLIT. THE FABRIC

SHALL BE AVAILABLE IN NAVY SHEADE WHITE 3006

OR KHAKI 3729 THE CLOTH SHALL POSESS BUILT IN

ANTISTATIC PROTECTION. THE CLOTH SHALL BE

SCOURED, HEAT SET AND DYED. THE LINING FABRIC

SHALL BE COMPATIBLE WITH THE CARE PROCEDURES

OF THE END ITEM FABRIC WITHOUT COMPROMISING THE

HAND DRAPE OF THE LINING.

.....REQUIREMENTS FOR 100%POLYESTER LINING:

ATTRIBUTE 1/ REQUIREMENTS TEST METHOD

FIBER 100%

INDENTIFICATION POLYESTER TABLE III

WEIGHT,OZ/YD2

(MIN) 2.2 TABLE III

CONSTRU. (MIN)..................... TABLE III

WALES 38

COURSE 52

BURSTING..........80 TABLE III

STRENGTH, LBS (MIN)

DIMENSIONAL

STABILITY, % (MAX)

AFTER 5 CYCLES

WALES...............2.0 TABLE III

Amendment 0003 SPM1C1-09-R-0087 Page 4 of 7

COURSES.............2.0 TABLE III

COURSES.............2.0 TABLE III

"OPACITY. VERIFICATION OF OPACITY OF PRODUCTS

MEETING THE SALIENT CHARACTERISTICS ABOVE WILL

BE PERFORMED BY THE NAVY CLOTHING AND TEXTILES

RESEARCH FACILITY."

PAGE8, PARA.3.3.7.1. LINE 9, DELETE *50%

POLYESTER COTTON) AND SUBSTITUTE

POLYESTER/35% COTTON).

PAGE 8, PARA 3.3.7.1, UNDER "CLASS 2, 3 AND 4

SLACKS", DELETE "FOLLOW NAVETRA MANUAL 414-01-

45-81, FORMULA II" AND SUBSTITUTE "FOLLOW

SHIPBOARD WASH FORMULA II".

PAGE 8, PARA 3.3.7 LABELS: ADD NEW PARAGRAPH

"3.3.7.4, BAR CODE LABEL/TAG

LABEL/TAG. EACH ITEM SHALL BE INDIVIDUALLY

BAR-CODED WITH A PAPER TAG FOR PERSONAL

CLOTHING ITEMS. THE PAPER USED FOR THE TAGS

SHALL BE STANDARD BLEACHED SULFATE HAVING A

BASIS WEIGHT OF 100 POUNDS WITHA SMOOTH

FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT

PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER

CLEARLY LEGIBLE AND READABLE BY SCANNER

THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE

A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)

ASSIGNED FOR ALL NSNS BY THE GOVERNMENT

THE INITIALS "UPC" MUST APPEAR BENEATH THE

CODE. THE BAR CODES FOR NSN AND UPC SHALL BE

A MEDIUM TO HIGH DENSITY AND SHALL BE

LOCATED SO THAT THEY ARE COMPLETELY VISIBLE

AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE

NO DAMAGE TO THE ITEM.

PAGE 8, PARA 3.3.7 LABELS: ADD NEW PARA 3.3.7.5,

"DPSC EXCLUSIVE EMBROIDERED LABEL" EACH PAIR OF

ON THE ITEM WHEN IT IS FOLDED AND OR PACKAGED

SLACKS SHALL HAVE A DPSC/CONTRACTOR EMBROIDERED

LABEL WITH THE CONTRACTORE NAME BELOW IT.

THE LABEL SHALL BE SEWN TO THE BOTTOM OF THE

WAISTBAND OPPOSITE THE SIZE LABEL, TWO INCHES

OFF CENTER BACK

PAGE 9, PARA 3.3.7.2 DELETE IN ITS ENTIRETY AND

SUBSTITUTE "3.3.7.2 EACH PAIR OF SLACKS SHALL

HAVE A SEPERATE SIZE LABEL CONFORMING TO TYPE VI

CLASS 2 OF DDD-L-20 AND BODY DIMENSION LABELING

REQUIREMENTS CONFORMING TO MIL-STD-984.THE LABEL

SHALL INDICATE SIZE, BODY DIMENSIONS AND STOCK

NUMBER AS SHOWN BELOW

SIZE CODE: 12 JP (EXAMPLE)

WAIST CIRC: 29 1/2 (EXAMPLE)

HIP CIRC: 38 (EXAMPLE)

NOTE: ABBREVIATIONS FOR THE APPLICABLE BODY

TYPES SHALL BE "J" FOR JUNIORS, "M" FOR MISSES

Amendment 0003 SPM1C1-09-R-0087 Page 5 of 7

AND "W" FOR WOMEN'S

ABBREVIATIONS FOR THE APPLICABLE LENGTHS

SHALL BE "P" FOR PETITE, "R" FOR REGULAR, AND

"T" FOR TALL".

INTERIM CHANGES TO MIS-S-24948 (PART 2)

PARA 3.3.7.3 DELETE IN ITS ENTIRETY AND

SUBSTITUTE "3.3.7.3 EACH PAIR OF SLACKS SHALL

HAVE A COMMERCIAL TYPE SIZE AND BODY DIMENSION

TICKET ATTACHED ON THE OUTSIDE OF THE WAISTBAND

ABOVE THE LEFT BACK DARTS. THE TICKET SHALL BE

3 INCHES LONG AND 1 INCH HIGH,MADE OF A SUITABLE

PLAIN WHITE CARDBOARD. THE CORNERS OF THE TICKET

MAY BE DOUBLE PERFORATED FOR EASE IN TACKING

THE TICKET SHALL BE PRINTED OR STAMPED IN BLUE

OR BLACK INK AND SHALL INCLUDE INFORMATION ON

SIZE (INCLUDING BODY TYPES AND LENGTHS) AND BODY

DIMENSIONS AS STATED IN 3.3.7.2."

PARA 3.3.8 DELETE IN ITS ENTIRETY AND SUBSTITUTE

"3.3.8 THE HOOK AND EYE FOR THE WAISTBAND SHALL

BE NORTH AND JUDD (HOOK FLEX H-49 E 50);

UNIVERSAL FASTENER (ELITE #3, #7, AND #8 HOOK

WITH #8 EYE OR #85 EYE); AKIM CO. (JUNIOR SERIES

-TYPE JB, SLIM-SLAK WITH MB EYE AND SLIK-SLAK);

STIMPSON (P-536, D-4086, D-4457, D-4228) OR

EQUAL. PRIOR TO THE USE OF AN "OR EQUAL" ITEM,

THE CONTRACTOR SHALL SUBMIT THE ITEM WITH

SUPPORTING DATA TO THE CONTRACTING OFFICER FOR

APPROVAL (SEE 4.4.1)."

PAGE 9, PARA. 3.4, DELETE AND SUBSTITUTE:

"3.4 DESIGN. THE SLACKS SHALL HAVE FRONT AND

BACK WAIST DARTS, QUARTER TOP POCKETS ON EACH

FRONT AT HIPS, TWO SECTION WAISTBAND WITH SEAT

SEAM OUTLET, AND A FRONT CLOSURE SLIDE FAST-

ENER. THE TYPE I SLACKS SHALL HAVE BELT LOOPS

ON THE WAISTBAND. TYPE I CLASSES 3 AND 4 SHALL

HAVE DOUBLE WELT STYLE HIP BACK POCKETS. TYPE

I CLASS 2,3 AND 4 SLACKS HAVE STRAIGHT LEGS.

THE CLASS 2 SLACKS SHALL HAVE A LINER EXTEND-

ING FROM THE WAISTBAND TO THE BOTTOM OF THE

POCKETS. TYPE II, CLASS 1 SLACKS HAVE BELL

BOTTOM LEGS AND A LINER EXTENDING FROM THE

WAISTBAND TO THE BOTTOM OF THE POCKETS. ALL

SLACKS ARE UNHEMMED. THE TYPE II SLACKS ARE

PRESSED INSIDE OUT WITH SIDE CREASES

(SEE FIGURES 1,2 AND 3)."

PAGE 10, 3.5, DELETE PATTERN PARTS LIST AND

SUBSTITUTE:

MATERIAL PIECE NAME SPEC NAME CUT#

BASIC MAT. FRONT_MS FRONT 2

. BACK_MS BACK 2

" FRONT_JR FRONT 2

" BACK-JR BACK 2

" FRONT_WO FRONT 2

" LEFT_FLY LEFT FLY 1

" R_FLY_FAC RIGHT FLY FACING 1

Amendment 0003 SPM1C1-09-R-0087 Page 6 of 7

" SP_BEARER SIDE POCKER BEARER 2

" HP_B_&_FAC HIP POCKET BEARER

. AND FACING CL 3&4 4

" SP_FACING SIDE POCKET FACING 2

CLOTH,TWILL SDE_PKT-A SIDE POCKET 2

" (SIZES 4-12)

" SDE_PKT-B SIDE POCKET 2

" (SIZES 14-26)

" L_FLY_LIN LEFT FLY LINING 1

" HIP_POCKET HIP POCKET CLS 3&4 2

FUSIBLE WSTBND_INT WAISTBAND 2

MATERIAL INTERLINING

LINER FR_LINR_MS WAISTBAND 2

MATERIAL INTERLINING

TYPE II, CLASS 1)

" BK_LINR_MS BACK LINER 2

" FR_LINR_JR FRONT LINER 2

" BK_LINR_JR BACK LINER 2

" BK_LINR_WO BACK LINER 2

LINER FR_LINR_MS FRONT LINER 2

MATERIAL BK_LINR_MS BACK LINER 2

(TYPE I, CL 2)

" FR_LINR_JR FRONT LINER 2

" BK_LINR_JR BACK LINER 2

" FR_LINR_WO FRONT LINER 2

" BK_LINR-WO BACK LINER 2

NOTE: PATTERNS ARE NOT FURNISHED FOR TYPE I BELT

LOOPS. SEE TABLE I, OPERATION 1 FOR REQUIREMENTS

PAGE 15, OPER. 4, LINE 2, AFTER "TYPE I, ADD

"CLASS 3 AND 4".

OPER. 4, BEFORE OPERATION C, DELETE "(TYPE II)

AND SUBSTITUTE "(TYPE I, CLASS 2 & TYPE II,

CLASS 1)".

PAGE 16, OPER. 5, AFTER "NOTE" DELETE "TYPE II"

AND SUBSTITUTE "TYPE I, CLASS 2 & TYPE II,

CLASS 1".

PAGE 25, 14 E. MAKE WAISTBAND.: LINES 11 AND 12

DELETE "FROM FRONT EDGE ON RIGHT WAISTBAND" AND

SUBSTITUTE "FROM FRONT RAW EDGE (NOT FOLDED

EDGE) ON RIGHT WAISTBAND

PAGE 32, TABLE I, OPERATION 21.E. APPLY BARTACKS

AND FINISH POCKET STITCHING.: DELETE OPERATION

AND SUBSTITUTE THE FOLLOWING : "E. PLACE ONE

ROW OF EDGE STITCHING ALONG POCKET FROM TOP

BARTACK TO WAISTBAND, 1/16 INCH FROM EDGE."

PAGE 32, TABLE I, OPERATION 21.E. UNDER COLUMN

SEAM AND STITCH TYPE, DELETE "SSC-2" AND

SUBSTITUTE "SSC-1".

PAGE 35, PARA 3.9, TABLE IIB, TYPE II, DELETE

MEASUREMENTS FOR SIZE 18 AND 20 KNEE(C) AND ADD

THE FOLLOWING CHANGES: SIZE 18 KNEE(C) 20

SIZE 20 KNEE(C) 20-1/4

DIMENSIONS

Amendment 0003 SPM1C1-09-R-0087 Page 7 of 7

HIPS: JUNIORS SIZE 18 "45-3/4 INCHES

.............SIZE 20 47-3/4 INCHES

HIPS: WOMEN'S SIZE 20 51-1/4 INCHES"

PAGE 35, PARAGRAPH 3.9, SIZES AND MEASUREMENTS

INSEAM LENGTH (E): DELETE MEASUREMENTS AND

SUBSTITUTE THE FOLLOWING

. "ALL PETITIES (P) - 32

. ALL REGULARS (R) - 33

. ALL TALLS (T) -35

. TOLERANCES +/- 1/2

TABLE IIA, TYPE I, (TO BE USED FOR TYPE I

SLACKS ONLY.) FOR THE SIZE 8 WOMEN'S HIP

MEASUREMENT, DELETE "41 1/2" AND SUBSTITUTE "42"

FOR SIZE 12 WOMEN'S HIP MEASUREMENT, DELETE

"45 1/2" AND SUBSTITUTE "45".

PAGE 35, PARA. 3.9, TABLE IIA, AT END OF TABLE

ADD THE FOLLOWING INFORMATION FOR SIZE 22,24,&26

"22 39 51 52-1/2 54-1/2 21-1/4 24 41 53 54-1/2 56-1/2 21-1/2 26 43 55 56-1/2 58-1/2 21-3/4

TABLE IIB, AT END OF TABLE, ADD THE FOLLOWING

INFORMATION FOR SIZES 26

"22 43 52-3/4 55-1/4 56-1/4 21 24-1/4

PAGE 36, PARAGRAPH 3.9 SIZES AND MEASUREMENTS.:

(C) KNEE - DELETE IN ITS ENTIRETY AND SUBSTITUTE

THE FOLLOWING

"KNEE - TWICE THE MEASUREMENT TAKEN FROM THE

FOLDED EDGE, TO FOLDED EDGE ACROSS THE WIDTH OF

THE SLACK LEG, 20 INCHES FOR PETITES AND

REGULARS, AND 21 INCHES FOR TALLS UP FROM THE

BOTTOM OF THE SLACKS."

PAGE 40, PARA. 5.1.1, LINE 4, DELETE "SIZE

TICKET".

(Ref. W2668)