SPM1C108R0184.pdf

copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

10 CALENDAR DAYS

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

PAGE OF PAGES

4. TYPE OF SOLICITATION

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

RATING

2. CONTRACT NO. 3. SOLICITATION NO. 5. DATE ISSUED 6. REQUISITION/PURCHASE NO.

7. ISSUED BY CODE 8. ADDRESS OFFER TO (If other than Item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. FOR

INFORMATION

CALL:

A. NAME

B. PHONE / FAX (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SEC. DESCRIPTION PAGE(S) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

I CONTRACT CLAUSES 43

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

PART IV - REPRESENTATIONS AND INSTRUCTIONS

J LIST OF ATTACHMENTS 61-62

K REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS 51

L INSTRS., CONDS., AND NOTICES TO OFFERORS 48

M EVALUATION FACTORS FOR AWARD 56

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

20 CALENDAR DAYS

30 CALENDAR DAYS

CALENDAR DAYS

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amend-ments to the SOLICITATION for offerors and related documents numbered and dated:

AMENDMENT NO. AMENDMENT NO. DATE

NAME

AND

ADDRESS

OF

OFFEROR

CODE FACILITY 16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

(X) (X)

A

B

C

D

E

F

G X

H

SOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECS./WORK STATEMENT

PACKAGING AND MARKING 41

INSPECTION AND ACCEPTANCE 42

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS 42 X

9. Sealed offers in original and handcarried, in the depository located in until

(Hour) local time

(Date)

CAUTION - LATE Submissions, Modifications, and Withdrawals: Section L, Provision No. 52.214-7 or 52.215-1.

All offers are subject to all terms and conditions contained in this solicitation.

15B. TELEPHONE NO. (Include area code) 15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

STANDARD FORM 33 (Rev. 9-97) Prescribed by GSA FAR (48 CFR) 53.214(c)

NSN 7540-01-152-8064

PREVIOUS EDITION NOT USABLE

41 U.S.C. 253(c) ( )

15A.

PerFORM (DLA)

DATE

SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

AWARD (To be completed by Government)

10 U.S.C. 2304(c) (

C. E-MAIL ADDRESS

15D. FAX NO. 15E. E-MAIL ADDRESS

DOC9 1 60

SPM1C1-08-R-0184 2008 OCT 07 0019038067

DEFENSE SUPPLY CENTER PHILADELPHIA

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

SPM1C1

DEFENSE SUPPLY CENTER PHILADELPHIA

C AND T SUPPLY CHAIN

ATTN:DSCP-PB

PO BOX 56667

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

no DSCP, Bldg. 36, Bid Opening Room 2008 OCT 30

FAX Number(s): (215)737-9300

Thomas Orlando, PCPQCC6

(215) 737-3255 / FAX: (215)737-2851 Thomas.Orlando@dla.mil

X 1 X X 2

X X

X X 44 X

X

SECTION B SUPPLIES/SERVICES AND PRICES

NSN'S AND CONTRACT LINE/SUBLINE NO(S): SEE SECTION F, DELIVERY SCHEDULE

PR NO: 19038067

NSN: 8410-01-413-2165(s) Nom: Coat, Woman's, MC, Poly/Wool, Gab Green

BASIC ORDERING PERIOD

QTY UNIT FCC FOB DEST TOTAL UNIT

PRICE PER COAT

2,940

PR TA DEST

Travis Association for the Blind 4509 Freidrich Lane Bldg 4, Suite 402 Austin, TX 78744-1812

PLEASE NOTE:

THERE ARE NO OPTION YEARS FOR THIS SOLICITAITON. YOU ARE REQUIRED TO OFFER ON

THE BASIC ORDERING PERIOD.

ACCELERATION OF DELIVERY IS NOT AUTHORIZED UNLESS PERMITTED IN WRITING BY THE

CONTRACTING OFFICER. IF PERMITTED, ACCELERATION OF DELIVERIES WILL BE

CONDUCTED AT NO ADDITIONAL COST TO THE GOVERNMENT.

REFER TO SECTION "L" AND "M" ON PAGES _____THRU_____. TECHNICAL PROPOSALS

ARE REQUIRED TO BE SUBMITTED SINCE THIS IS A BEST VALUE SOURCE SELECTION

ACQUISITION SET ASIDE 100% FOR SMALL BUSINESSES. FAILURE TO SUBMIT A PROPOSAL MAY RESULT IN

REJECTION OF YOUR ENTIRE OFFER.

THE GOVERNMENT RESERVES THE RIGHT TO MAKE AN AWARD ON INITIAL OFFERS RECEIVED,

THEREFORE, YOUR BEST OFFER SHOULD BE SUBMITTED.

Solicitation Number: PAGE OF PAGES

CONTINUATION SHEET SPM1C1-08-R-0184 3 60

SECTION B

PR: 0019038067

PGC: 02271

ITEM DESCRIPTION:

COAT, WOMEN'S, POLYESTER/WOOL GABARDINE

SHADE 2212

ADDITIONAL INFORMATION FOR MIL-C-29427:

PATTERN DATE: 5 SEPTEMBER 2007

STANDARD SAMPLE OF CLOTH, POLY/WOOL GABARDINE,

10.6 OZ, GREEN SHADE 2212 CONFORMING TO TYPE II,

CLASS 12 OF MIL-DTL-10176 IS AVAILABLE ON ROLL

NO.

14-086883 FOR SHADE, FINISH AND COLORFASTNESS.

INTERIM SPECIFICATION CHANGES TO MIL-C-29427B:

PAGE 2, PARA. 2.1.1, UNDER 'SPECIFICATIONS',

'FEDERAL', DELETE 'DDD-T-86 - TAPE, TEXTILE,

COTTON, GENERAL PURPOSE (UNBLEACHED, BLEACHED,

OR DYED)' AND SUBSTITUTE 'A-A-52071 - TAPE,

TEXTILE, COTTON, GENERAL PURPOSE'.

PAGE 2, PARA. 2.1.1, UNDER 'SPECIFICATIONS',

'FEDERAL', DELETE 'DDD-L-20 - LABEL, FOR

CLOTHING, EQUIPAGE, AND TENTAGE, (GENERAL USE)

AND INSERT 'A-A-52105- CLOTH, INTERLINING,

COTTON OR SYNTHETIC, WARP, AND SPUN HAIR WOOL

OR RAYON'.

UNDER 'SPECIFICATIONS', 'MILITARY' DELETE

'MIL-C-297- CLOTH INTERLINING, COTTON WARP, AND

SPUN

HAIR-WOOL FILLING'.

PAGE 3, PARA. 2.1.1, UNDER 'SPECIFICATIONS',

'MILITARY', DELETE 'MIL-C-368 - CLOTH, SATIN,

RAYON AND CLOTH, TWILL, RAYON) AND INSERT

'MIL-DTL-32075- LABEL, FOR CLOTHING, EQUIPAGE,

AND TENTAGE, (GENERAL USE)).

PAGE 3, PARA. 2.1.1 UNDER 'STANDARDS', 'FEDERAL

DELETE 'FED-STD-191 - TEXTILE TEST METHODS' AND

DELETE 'FED-STD-751 - STITCHES, SEAMS AND

STITCHINGS'.

PAGE 3, PARA. 2.1.1 UNDER 'STANDARDS',

'MILITARY',

DELETE 'MIL-STD-147 - PALLETIZED UNIT LOADS' AND

DELETE *MIL-STD-731 - QUALITY OF WOOD MEMBERS

AND

CONTINUED ON NEXT PAGE

CONTINUATION SHEET SPM1C1-08-R-0184 4 60

SECTION B

CONTAINERS AND PALLETS'.

PAGE 3, PARA. 2.1.1 AFTER 'STANDARDS' ADD NEW

CATEGORY AS FOLLOWS:

HANDBOOKS MILITARY

MIL-HDBK-774 - PALLETIZED UNIT LOADS'.

PAGE 4, PARAGRAPH 2.2, UNDER 'AMERICAN SOCIETY

FOR TESTING AND MATERIALS (ASTM), INSERT THE

FOLLOWING TEST METHODS:

ASTM D 3775 FABRIC COUNT OF WOVEN FABRIC

ASTM D 3776 MASS PER UNIT AREA (WEIGHT) OF

FABRIC

ASTM D 5034 BREAKING FORCE AND ELONGATION OF

TEXTILE FABRICS (GRAB TEST)

ASTM D 6193 STITCHES AND SEAMS

ASTM D 6199 WOOD MEMBERS OF CONTAINERS AND

QUALITY OF'

AND LINE 4, AFTER 'TESTING MATERIALS, 'DELETE

THE ADDRESS AND SUBSTITUTE '100 BARR HARBOR

DRIVE, WEST CONSHOHOCKEN, PA 19428-2959'

PAGE 4, PARAGRAPH 2.2, INSERT THE FOLLOWING

DOCUMENTS:

'AMERICAN ASSOCIATION OF TEXTILE CHEMISTS

AND COLORISTS (AATCC) AATCC TECHNICAL MANUAL:

8-COLORFASTNESS TO CROCKING

15-COLORFASTNESS TO PERSPIRATION

132-COLORFASTNESS TO DRYCLEANING

(APPLICATION FOR COPIES SHOULD BE ADDRESSED

TO AMERICAN ASSOCIATION OF TEXTILE CHEMISTS

AND COLORISTS, P.O. BOX 12215, RESEARCH

TRIANGLE PARK, NC 27709).'

AMERICAN SOCIETY FOR QUALITY CONTROL

ANSI/ASQC Z1.4 AMERICAN NATIONAL STANDARD

SAMPLING PROCEDURES AND TABLES FOR

INSPECTION BY ATTRIBUTES

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO

AMERICAN SOCIETY FOR QUALITY CONTROL, P.O. BOX

3005, 611 E. WISCONSIN AVENUE, MILWAUKEE, WI

53201-4606).'

PAGE 5 PARA. 3.3.2, DELETE IN ITS ENTIRETY

AND SUBSTITUTE THE FOLLOWING PARAGRAPH:

'3.2.2.LINING. THE MATERIAL FOR LINING THE

COATS SHALL BE A TWILL OR SATIN, SOLUTION

OR PIECE DYED ACETATE CLOTH, CONFORMING TO THE

REQUIREMENTS IN TABLE AI.

THE SHADE OF LINING MATERIAL SHALL BE

A GOOD MATCH TO THE BASIC MATERIAL.

PAGE 5, PARA. 3.2.5, LINE 4, DELETE: 'METHOD

CONTINUATION SHEET SPM1C1-08-R-0184 5 60

SECTION B

5580 OF FED-STD-19' AND SUBSTITUTE 'AATCC 158'.

PAGE 5, PARAGRAPH 3.3.4, AT END OF PARAGRAPH,

INSERT: 'AS AN ALTERNATE, THE MATERIAL MAY BE

100 PERCENT POLYESTER, NEEDLE-PUNCHED NON-WOVEN

MATERIAL, WEIGHING BETWWEN 8.0 AND 10.0 OZ./

SQUARE YARD WITH A THICKNESS BETWEEN 0.070 AND

0.095 INCH AT 0/6 PSI AND EXHIBITING A CROSS-

MACHINE DIRECTION STIFFNESS OF 0.05 LOAD POUNDS

(MINIMUM) IN ACCORDANCE WITH ASTM-D-747 (VOL.

8.01), APPARENT BENDING MODULUS OF PLASTICS BY MEANS OF

A CANTILEVER BEAM. THE COLOR OF THE UNDERCOLLAR

MATERIAL SHALL BE GREEN THAT CLOSELY MATCHES THE

BASIC MATERIAL.'

PAGE 5, PARA. 3.3.7, LINE 1, DELETE 'TYPE III'

AND SUBSTITUTE 'TYPE II'; LINE 2, DELETE

'DDD-T-86' AND SUBSTITUTE 'A-A-52071'.

PAGE 5, PARA. 3.3.9, SHOULDER PADS

AT END OF THE PARAGRAPH ADD 'AN ALTERNATE PAD

MAY BE USED CONFORMING TO THE REQUIREMENTS

OF 'INSERT B' IN THE INTERIM CHANGES TO

MIL-P-15064'

PAGE 6, PARA. 3.3.11.1, LINE 3, DELETE 'TOP WELT

AND SUBSTITUTE 'CUFFS'.

PAGE 6, PARA. 3.3.11.2 FUSIBLE COAT FRONTS. AT

THE END OF THE PARA. ADD 'AS AN ALTERNATE STYLE

NO. T3G WEFT KNIT MAY BE USED.'

PAGE 6, PARA. 3.3.12 HANGER BRAID. AT THE END OF

ADD THE PARA. 'AS AN ALTERNATE COLOR, BLACK MAY

BE

USED'.

PAGE 7, PARA. 3.3.16.1 IDENTIFICATION LABEL

LINE 2, 'DDD-L-20' AND SUBSTITUTE

'MIL-DTL-32075'.

AT THE END OF THE PARAGRAPH, ADD NEW LINE

DIRECTLY BELOW FIBER CONTENT' 'DRY CLEAN ONLY'.

PAGE 7, PARA. 3.3.16.2

LINE 2, DELETE 'DDD-L-20' AND SUBSTITUTE

'MIL-DTL-32075'.

PAGE 7, PARA. 3.3.16.1 AT THE END OF THE PARA.

ADD 'OR AS AN ALTERNATE THE USE OF 4800 WT

POLYESTER LABELING TAPE IS APPROVED'.

PAGE 8, PARA. 3.3.16.3

LINE 2, 'DDD-L-20' AND SUBSTITUTE 'MIL-DTL-32075

PAGE 8 AFTER PARAGRAPH 3.3.16.3, ADD THE

FOLLOWING PARAGRAPH: '3.3.16.4 DSCP EXCLUSIVE

LABEL. EACH COAT SHALL CONTAIN THE DSCP

EXCLUSIVE

CONTINUATION SHEET SPM1C1-08-R-0184 6 60

SECTION B

LABEL AND SHOULD BE SEWN ON THE LEFT SIDE ABOVE

THE IDENTIFICATION LABEL. THE LABEL

SHALL THE BE APPROXIMATELY 2 INCHES

SQUARE AND SEWN ON ALL FOUR SIDES.'

PAGE 8, PARAGRAPH 3.4, LINE 4, DELETE

'SIMULATED BREAST POCKET WITH OUTSIDE WELT'

TABLE I, PATTERN PARTS, DELETE 'POCKET WELT 1'

PAGE 9, PARA. TABLE I, UNDER PATTERN

NOMENCLATURE DELETE 'MATERIAL: CLOTH, RAYON,

LINING' AND SUBSTITUTE 'MATERIAL: CLOTH,

ACETATE LINING'

PAGE 9, PARA. 3.5.1, LINE 2, DELETE

'FED-STD-751'

AND SUBSTITUTE 'ASTM D 6193'.

PAGE 11, TABLE II, OPERATION 1.D, LINE 3, DELETE

'RAYON' AND LINE 5, DELETE 'RAYON'.

PAGE 11, OPER. 1.C, LINE 5 DELETE ENTIRE

SENTENCE BEGINNING WITH 'THE WELT'.

PAGE 13, TABLE II, OPERATION 3.D, LINE 4, DELETE

'RAYON'

PAGE 19, OPER. 9: JOIN CUFF TO SLEEVE., UNDER

'FINISHED APPEARANCE.', LINE 2, AFTER 'CUFFS'

INSERT 'SHALL BE PROPERLY FORMED AND CREASED

AND'. BEFORE OPERATION 9A, INSERT NEW OPERATION

9A.: 'POSITION THE FUSIBLE INTERLINING ON THE

BACK SIDE OF CUFF AND FUSE.'

PAGE 23 & 24 OPER. 15, DELETE ENTIRELY.

PAGE 32 & 33 OPER. 29, DELETE ENTIRELY.

PAGE 52 OPERATION 64.B, IN STITCH COLUMN ADD

'OR 301' AND IN THREAD COLUMN DELETE '(SILK)'

AND SUBSTITUTE '(COMMERCIAL)'.

PAGE 62, PARA. 4.5, LINE 2, DELETE 'MIL-STD-105'

SUBSTITUTE 'ANSI/ASQC-Z1.4'

PAGE 63, PARA, 4.5.1, AT THE END OF THE PARA.

INSERT THE FOLLOWING:

'TESTING SHALL BE PERFORMED ON THE COMPONENTS

LISTED IN TABLE IV FOR CHARACTERISTICS NOTED

PAGE 64, PARA. 5.1.1, AT END OF PARA. ADD THE

FOLLOWING: 'WHERE HANGER PACKS ARE SPECIFIED,

SEE PARA. 5.1.3.'

CONTINUATION SHEET SPM1C1-08-R-0184 7 60

SECTION B

PAGE 65, PARA. 5.2.2, AT END OF PARA. ADD THE

FOLLOWING: 'WHERE HANGER PACKS ARE

SPECIFIED, SEE PARAS. 5.2.4 AND 5.4.1.'

(Ref. W2271)

ACETATE LINING CHANGES REPLACEMENT FOR RAYON

(FOR MARINE CORPS DRESS UNIFORMS)

TABLE AI. LINING MATERIAL.

CHARACTERISTIC REQUIREMENT VERIFICATION

. PARAGRAPH

. TWILL SATIN

YARNS PER INCH (MIN.)

WARP 120 288 4.5.1

FILLING 68 68 4.5.1

WEIGHT -OZ/YD 3.8 4.9 4.5.1

(MIN.)

BREAKING STRENGTH (LBS.,

(MIN)

DRY

WARP 74 83 4.5.1

FILLING 49 117 4.5.1

WET

WARP 54 54 4.5.1

FILLING 34 77 4.5.1

COLORFASTNESS TO:

PERSPIRATION (MIN.)

COLOR CHANGE 5 5 4.5.1

STAINING ON

COTTON 3.5 5 4.5.1

STAINING ON

WOOL 4.5 5 4.5.1

DRYCLEANING

COLOR CHANGE 4.5 5 4.5.1

STAINING ON

COTTON 4.5 5 4.5.1

STAINING ON

WOOL 4.5 5 4.5.1

CROCKING DRY 4.5 4.5 4.5.1

TABLE IV

TESTING REQUIREMENTS FOR ACETATE LINING CLOTH

COMPONENTS CHARACTER- REQUIREMENT TEST

CONTINUATION SHEET SPM1C1-08-R-0184 8 60

SECTION B

. ISTIC PARAGRAPH METHOD

LINING CLOTH YARNS/INCH 3.3.2 ASTM D

ACETATE

. WEIGHT 3.3.2 ASTM D

. BREAK STRENGTH 3.3.2 ASTM D

. COLORFASTNESS TO

. PERSPIRATION 3.3.2 AATCC 15

. DRYCLEANING 3.3.2 AATCC 132

. CROCKING 3.3.2 AATCC 8

PARA. 4.5.1.1 SAMPLING. UNLESS OTHERWISE

SPECIFIED

IN SUBSIDIARY SPECIFICATIONS, SAMPLING SHALL

BE IN ACCORDANCE WITH THE FOLLOWING. THE LOT

SHALL BE UNACCEPTABLE IF ONE OR MORE SAMPLE

UNITS FAIL TO MEET ANY TEST REQUIREMENTS

SPECIFIED HEREIN.

LOT SIZE SAMPLE SIZE (SAMPLE UNIT)

800 OR LESS 2

801 THROUGH 22,000 3

22,001 AND OVER 5

THE UNIT FOR EXPRESSING LOT SIZE AND SAMPLE

UNIT FOR TESTING EACH COMPONENT SHALL BE IN

ACCORDANCE WITH THE APPLICABLE SUBSIDIARY

SPECIFICATION OR AS FOLLOWS:

COMPONENTS LOT SIZE SAMPLE UNIT

. EXPRESS AS FOR TESTING

LINING CLOTH

ACETATE YARDS 1/2 YARD

(Ref. 90271)

DELETE CURRENT 'BARCODE LABEL/TAG'

REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG. EACH ITEM SHALL BE INDIVIDUALLY

BAR-CODED WITH A PAPER TAG FOR PERSONAL

CLOTHING ITEMS. THE PAPER USED FOR THE TAGS

SHALL BE STANDARD BLEACHED SULFATE HAVING A

BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH

FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT

PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.

THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE

CONTINUATION SHEET SPM1C1-08-R-0184 9 60

SECTION B

A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)

ASSIGNED FOR ALL NSNS BY THE GOVERNMENT.

THE INITIAL 'UPC' MUST APPEAR BENEATH THE

CODE. THE BAR CODES FOR NSN AND UPC SHALL BE

A MEDIUM TO HIGH DENSITY AND SHALL BE

LOCATED SO THAT THEY ARE COMPLETELY VISIBLE

ON THE ITEM WHEN IT IS FOLDED AND PACKAGED

AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE

NO DAMAGE TO THE ITEM.

PACKAGING SECTION. ADD THE FOLLOWING:

NOTE: UNIVERSAL PRODUCT CODE INFORMATION

THE GOVERNMENT ASSIGNED UNIVERSAL PRODUCT CODE

(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON

WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/

TAGS:

BAR CODE OMITTED OR NOT MINOR A

READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) MINOR A

OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM MINOR A

CAUSES DAMAGE TO THE ITEM MAJOR

APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF

DOCUMENTS IS APPLICABLE TO THIS PROCUREMENT:

(Ref. 93546)

ADDITIONAL INFORMATION FOR A-A-50067:

PAGE 1 PARA 2.2, LINE 5, AFTER ' SECTION 16'

DELETE 'THE CLOTH SHALL HAVE A MAXIMUM SHRINKAGE

RATE OF 2.0 IN THE WARP AND FILLING DIRECTION.'

AND SUBSTITUTE ' THE CLOTH SHALL HAVE A MAXIMUM

SHRINKAGE RATE OF 4.0 IN BOTH THE WARP AND

FILLING DIRECTIONS.'

(Ref. T0402)

ADDITIONAL INFORMATION: INTERIM CHANGES TO

A-A-50186:

PAGE 1:

PARA. 1.1 TYPES, NEXT TO TYPE V NON-WOVEN ADD

'(MEDIUM WEIGHT)', UNDER TYPE V ADD 'TYPE VI

CONTINUATION SHEET SPM1C1-08-R-0184 10 60

SECTION B

NON-WOVEN (LIGHT WEIGHT)'.

PARAGRAPH 2.1, LINE 5. GENERAL.: DELETE

'SATURATION BONDED WITH ACRYLIC TYPE BINDER' AND

SUBSTITUTE 'EITHER WET-LAID, SATURATION BONDED

OR THERMAL BONDED'.

PAGE 2:

TABLE 1. PHYSICAL REQUIREMENTS (WOVEN) UNDER

TEST METHOD COLUMN, LINE 3 DELETE '1600' AND

SUBSTITUTE 'AATCC 20 3/'.

TABLE I. PHYSICAL REQUIREMENTS (WOVEN) AT BOTTOM

OF PAGE UNDER FOOTNOTE 2/ ADD THE FOLLOWING: '3/

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND

COLORISTS TEST METHOD.'

PAGE 3, TABLE II, PHYSICAL REQUIREMENTS

(NONWOVEN) UNDER TYPE V, AND VI, ACROSS

'CONSTRUCTION': DELETE 'WET-LAID' AND 'WET-LAID

OR SATURATE, THERMAL BONDED' AND SUBSTITUTE 'SEE

2.1' FOR BOTH TYPES.

TABLE II, UNDER TYPE VI: ADD UNDER EACH

CHARACTERISTIC: '1.5, 12, 8, 2.5, 2.5, WET- LAID

OR SATURATE THERMAL BONDED' RESPECTIVELY.

PAGE 3, PARA. 3.2 FINISH. LINE 1 DELETE 'AN

APPROVED' AND SUBSTITUTE ' A COMMERCIALLY

ACCEPTED'.

PAGE 5: ADD THE FOLLOWING: '5.7 SUPER SESSION

DATA. THE TYPES OF CLOTH COVERED BY THIS

COMMERCIAL ITEM DESCRIPTION REPLACE TYPES

COVERED BY CCC-C-438 AS FOLLOWS:

A-A-50186 CCC-C-438

TYPE I TYPE I, CLASSES 1 AND 2

TYPE II TYPE II, CLASS 1

TYPE III TYPE III, CLASS 1

TYPE IV TYPE III, CLASS 2

TYPE V TYPE IV, CLASS 1

TYPE VI TYPE IV, CLASS 2'

(ref. T1034 - May 19, 2006)

ADDITIONAL INFORMATION FOR A-A-50196:

INTERIM SPECIFICATION CHANGES TO

A-A-50196A:

PAGE 4, PARAGRAPH 4.1 PACKAGING.; PARAGRAPH

4.2 PACKING.; PARAGRAPH 4.3 PALLETIZATION.;

PARAGRAPH 4.4 MARKING.; DELETE IN THEIR

ENTIRETY AND SUBSTITUTE:

4.1 PRESERVATION, PACKING, AND MARKING. THE

PRESERVATION, PACKING, AND MARKING SHALL BE

AS SPECIFIED IN THE CONTRACT OR PURCHASE

ORDER.'

CONTINUATION SHEET SPM1C1-08-R-0184 11 60

SECTION B

PAGE 4, 5.1: ADD THE FOLLOWING SUBPARAGRAPH:

'F. FINISH REQUIRED, SPECIFY SOFT OR WAX

(SEE 2.6).'.

PAGE 5, PARAGRAPH 5.2 SOURCE OF GOVERNMENT

DOCUMENTS. ADD BELOW 'ARE AVAILABLE FROM'

'DODSSP - CUSTOMER SERVICE'.

(Ref. T1074)

ADDITIONAL INFORMATION FOR A-A-50198:

NO ADDITIONAL INFORMATION FOLLOWS..

(Ref. T1061)

ADDITIONAL INFORMATION FOR A-A-52105:

INTERIM SPECIFICATION CHANGES TO

A-A-52105:

PAGE 1,PARAGRAPH 2.1,GENERAL DESCRIPTION.,

LINE 2: DELETE: '100 % POLYESTER'.

LINE 5, DELETE 'BLEND OF GOAT-HAIR' AND

SUBSTITUTE 'BLEND OF HORSEHAIR OR GOAT-HAIR'.

PAGE 2, PARAGRAPH 2.1, LINE 6, AFTER *YARN):

DELETE THE PERIOD AND ADD *OR A 100% POLY-

ESTER STAPLE FIBER SPUN SINGLES YARN.'.

PAGE 2, PARAGRAPH 2.2, TABLE 1, UNDER

'CHARACTERISTIC' COLUMN, UNDER 'ANIMAL FIBER

CONTENT PERCENT: 2/', DELETE 'GOAT-HAIR AND

RAYON FILLING' AND SUBSTITUTE 'HORSE OR GOAT-

HAIR AND RAYON'.

PAGE 2, PARAGRAPH 2.2, TABLE 1, UNDER

'CHARACTERISTIC' COLUMN, UNDER 'WEIGHT, OZ./SQ.

YD.','MINIMUM', UNDER' TYPE 11' COLUMN, DELETE

'7.0' AND SUBSTITUTE '6.8'.

PAGE 2, PARAGRAPH 2.2, TABLE 1, UNDER

'CHARACTERISTIC' COLUMN, UNDER 'WEIGHT,OZ./SQ.

YD.','MAXIMUM', UNDER 'TYPE 1' COLUMN, DELETE

'7.0'AND SUBSTITUTE '6.7'.

PAGE 2,PARAGRAPH 2.2, TABLE 1, UNDER

'CHARACTERISTIC' COLUMN, UNDER 'YARNS PER INCH

(MIN).', 'FILLING', UNDER 'TYPE 11' COLUMN.

DELETE '34' AND SUBSTITUTE '27'.

CONTINUATION SHEET SPM1C1-08-R-0184 12 60

SECTION B

PAGE 3, PARAGRAPH 2.2, TABLE 1, UNDER

'CHARACTERISTIC' COLUMN,' BREAKING STRENGTH,LBS.

(MIN).','WARP', UNDER 'TYPE 11' COLUMN, DELETE

'50' AND SUBSTITUTE '35'.

PAGE 3, PARAGRAPH 2.2, TABLE 1, FOOTNOTE 4/,

AFTER 'DIRECTION.' INSERT 'STIFFNESS VALUES

SHALL BE MAINTAINED AFTER ONE COMMERCIAL

DRYCLEANING USING PERCHLOROETHYLENE SOLVENT

(SAME AS DRESS COAT).'

PAGE 2, TABLE 1, PHYSICAL REQUIREMENTS UNDER

TEST METHOD COLUMN, LINE 2 DELETE '1600' AND

SUBSTITUTE 'AATCC 20 6/'.

PAGE 3, BELOW FOOTNOTE '5/' ADD '6/ AATCC TEST

METHOD.'

PAGE 5, ADD THE FOLLOWING NEW PARAGRAPH:

'5.2.1.2 NON-GOVERNMENT PUBLICATIONS. THE

FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT

TO THE EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE

SPECIFIED, THE ISSUES OF THE DOCUMENTS WHICH ARE

DOD ADOPTED ARE THOSE LISTED IN THE ISSUE OF THE

DODISS CITED IN THE SOLICITATION. UNLESS

OTHERWISE SPECIFIED, THE ISSUES OF DOCUMENTS

NOT LISTED IN THE DODISS ARE THE ISSUES OF THE

DOCUMENTS CITED IN THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND

COLORISTS (AATCC)

AATCC 20 - FIBER ANALYSIS: QUALITATIVE

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND

COLORISTS (AATCC), P.O. BOX 12215, TRIANGLE

PARK, NC 27709-2215)'

(Ref. T1512)

THREAD, POLYESTER CORE, COTTON OR

POLYESTER-COVERED;

DATED JULY 31, 2006

ADDITIONAL INFORMATION FOR A-A-50199A DATED

7/31/2006:

SPECIAL NOTE: INTERIM STANDARD SAMPLE FOR FOR

FOLIAGE GREEN 504 IS MIL-C-44436, ROLL #3729.

(THE FOLIAGE GREEN 502 AREA OF THE PATTERN) AND

IS REFERENCED FOR SHADE ONLY. THIS STANDARD IS

TEMPORARY UNTIL FURTHER NOTICE. FOLIAGE GREEN

CONTINUATION SHEET SPM1C1-08-R-0184 13 60

SECTION B

504 IS TO BE USED AS SPECIFIED BY CONTRACT. THIS

SHADE HAS BEEN APPROVED FOR TYPE I COLOR

STANDARD.

(ref. T1064 - Feb. 27, 2007 SAP 4034641)

ADDITIONAL INFORMATION FOR A-A-52094A:

SIZE 16; TWIST Z; TYPE II; 16.0 OUNCES NOMINAL;

GLAZED FINISH

NO ADDITIONAL INFORMATION

(Ref. T1481 - 4/08).

ADDITIONAL INFORMATION FOR A-A-52106:

INTERIM CHANGES TO A-A-52106:

PAGE 1, UNDER ABSTRACT. AFTER 'THE CLASS 3

CLOTH IS INTENDED FOR USE AS LINING MATERIAL

IN DRESS COATS.' ADD 'CLASS 4 CLOTH IS INTENDED

TO BE USED AS A GARMENT LINING. CLASS 5 CLOTH

IS INTENDED FOR USE AS A NECKTIE AND NECKTAB

OUTERSHELL FABRIC.'

PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT

WEIGHT 2.4 OZ; 2/1 RIGHT HAND TWILL USING

100% FILAMENT POLYESTER SINGLE PLY YARNS FOR

BOTH CLASS 4 AND CLASS 5.

CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE

TWILL

PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD

PAGE 1, GENERAL DESCRIPTION. LINE 5 AFTER

'YARNS' ADD 'THE CLASS 4 CLOTH SHALL BE A TWO

UP-ONE DOWN RIGHT HAND TWILL. THE CLASS 5 CLOTH

SHALL BE A FIVE UP-ONE DOWN HERRINGBONE TWILL.

THE YARNS FOR CLASS 4 CLOTH SHALL BE SINGLE PLY

WITH A NOMINAL DENIER OF 70 FOR THE WARP YARNS

AND 150 FOR THE FILLING YARNS.

PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER

CLASS 3' ADD INFORMATION FOR 'CLASSES 4 AND 5'

CHARACTERISTIC CLASS 4 CLASS 5

MATERIAL CONTENT,

PERCENT:

POLYESTER 100% 100%

COTTON 0 0

RAYON 0 0

COLORFASTNESS TO:

PERSPIRATION GOOD GOOD

SUBLIMATION GOOD GOOD

CONTINUATION SHEET SPM1C1-08-R-0184 14 60

SECTION B

WET DRY-CLEANING GOOD GOOD

CROCKING (MIN.) 3.5 3/ 3.5 3/

(BLACK OR DARK

BLUE COLORS) 1.0 3/ 1.0 3/

LABILE SULFUR CONTENT 4/ 4/

WEIGHT, OZ. /SQ. YD.

(MIN.) 2.4 3.0

YARNS PER INCH (MIN.)

WARP 124 140

FILLING 76 75

BREAKING STRENGTH

POUNDS (MIN.)

WARP 140 160

FILLING 110 130

TEARING STRENGTH

POUNDS (MIN.)

WARP 5.0 14.0

FILLING 3.0 10.5

PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER

'THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN

'THE CLASS 5 CLOTH , USING 100 % FILAMENT

HERRINGBONE TWILL.' INSERT 'THE CLASS 6 CLOTH

POLYESTER SINGLE PLY WITH BLACK 70 DENIER

NOMINAL WARP AND AIR FORCE BLUE 1622 150 DENIER

NOMINAL FILLING YARNS.'

USING 100% FILAMENT POLYESTER SINGLE PLY WITH 70

DENIER NOMINAL IN THE WARP AND 150 DENIER

HERRINGBONE TWILL.' INSERT 'THE CLASS 6 CLOTH

POLYESTER SINGLE PLY WITH BLACK 70 DENIER

NOMINAL WARP AND AIR FORCE BLUE 1622 150 DENIER

NOMINAL FILLING YARNS.'

USING 100% FILAMENT POLYESTER SINGLE PLY WITH 70

DENIER NOMINAL IN THE WARP AND 150 DENIER

NOMINAL IN THE FILLING DIRECTION.'

PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS:

TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING

PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE

FOLLOWING NEW PARAGRAPH. '2.4 COLOR. THE COLOR

OF THE FINISHED CLOTH SHALL BE AS SPECIFIED (SEE

5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR

SHADE. CLASS 5 FABRIC IS MADE FROM DYED WARP

AND DYED FILLING IN TWO DIFFERENT COLORS. CLASS

5 FABRIC SHALL BE AIR FORCE SHADE BLUE 1622

ROLL # 89-2.

(Ref. T1514)

ADDITIONAL INFORMATION FOR V-T-295:

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS

MIL-C-444346, ROLL #3729 (THE FOLIAGE GREEN 502

CONTINUATION SHEET SPM1C1-08-R-0184 15 60

SECTION B

AREA OF THE PATTERN), AND REFERENCED FOR SHADE

ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER

NOTICE.

INTERIM CHANGES TO V-T-295E:

PAGE 4, PARAGRAPH 3.4.1; DELETE IN ITS ENTIRETY

AND SUBSTITUTE THE FOLLOWING:

'3.4.1 MATCHING. THE SHADE OF THE THREAD SHALL

MATCH THE APPROVED SHADE STANDARD SAMPLE (SEE

6.3) WHEN VIEWED UNDER FILTERED TUNGSTEN LAMPS

WHICH APPROXIMATE ARTIFICIAL DAYLIGHT HAVING A

CORRELATED COLOR TEMPERATURE OF 7000 PLUS OR

MINUS 500K WITH ILLUMINATION OF 100 PLUS OR

MINUS 20 FOOT CANDLES, AND SHALL BE GOOD MATCH

TO THE STANDARD SAMPLE UNDER INCANDESCENT

LAMPLIGHT AT 2300 PLUS OR MINUS 100K. WHEN END

ITEM USE OF THE THREAD IS NOT KNOWN, THREAD

SIZES B OR FINER SHALL BE EVALUATED FOR SHADE

MATCHING AFTER REMOVAL OF FINISH THREAD TO BE

USED FOR DRY CLEANABLE WOOL OR DRY CLEANABLE

WOOL BLEND CLOTHING OR IN END ITEMS REQUIRING

DRYCLEANING SHALL BE EVALUATED FOR SHADE

MATCHING AFTER REMOVAL OF FINISH. REMOVAL OF

FINISH FROM THREAD, WHEN REQUIRED, SHALL BE AS

SPECIFIED IN 4.3.1.1.'

PAGE 4, PARA. '3.5.3 TYPE III': DELETE AND

SUBSTITUTE: '3.5.3 TYPE III. TYPE III THREAD

SHALL BE A SINGLE PLY CONSTRUCTION, BONDED TO

UNITE ALL THE MULTIFILAMENT YARNS TO FORM A

SMOOTH EVEN MONOCHORD, CONSTITUENT

MULTI-FILAMENT YARNS BEFORE COMBINING SHALL

CONTAIN ONLY THE ORIGINAL YARN PRODUCER'S TWIST,

AND HAVE AT LEAST 17 FILAMENTS PER YARN BY

VISUAL INSPECTION. THE FINAL TWIST SHALL BE NO

MORE THAN 4 T.P.I.'

PAGE 6, PARA. 3.7, PHYSICAL REQUIREMENTS. TABLE

II, UNDER 'ELONGATION PERCENT MAXIMUM' COLUMN

ACROSS FROM 'LETTER SIZE FF' DELETE '26' AND AND

SUBSTITUTE '35.'

PAGE 7, TABLE III, UNDER 'LETTER SIZE': ADD THE

FOLLOWING NEW SIZE: 'FF 1 154 2,151 3,850

17.5 35'.

PAGE 7, TABLE III, TYPE III, UNDER 'BREAKING

FORCE', AFTER

'BREAKING FORCE' INSERT 'MINIMUM'

CONTINUATION SHEET SPM1C1-08-R-0184 16 60

SECTION B

PAGE 10, PARA. 3.9.1.2. DELETE IN ITS ENTIRETY

AND SUBSTITUTE: '3.9.1.2

POLYPROPYLENE. THE TUBES SHALL BE MOLDED FROM A

VIRGIN PROPYLENE

HOMOPOLYMER PLASTIC (SEE 6.7) MEETING THE

REQUIREMENTS OF CLASSIFICATION

I-48108, I-58108, OR I-58208 UNDER ASTM D-2146

(SEE 4.2.3).'

PAGE 11, PARAGRAPH 4.2.1.1 THREAD ON HOLDER

EXAMINATION. LINE 7, DELETE '4.0' AND SUBSTITUTE

'2.5'

PAGE 12, PARAGRAPH 4.2.1.2. THREAD AS UNWOUND

EXAMINATION. LINE 7, DELETE '4.0' AND SUBSTITUTE

'2.5'

PAGE 14, PARA. 4.3.1.1, LINE 7, DELETE 'SEE

6.3.1)'.

PAGE 15, PARAGRAPH 6.3.1: DELETE IN ITS

ENTIRETY. PARA. 6.1.1, LINE 1: DELETE 'I AND II'

AND SUBSTITUTE 'I,II AND III'.

PAGE 17, PARA. 6.7. DELETE AND SUBSTITUTE: '6.7

MATERIAL FOR

POLYPROPYLENE TUBES. EL REXENE 11-S-5 AND EXXON

PP-1074 MATERIALS HAVE

BEEN USED SATISFACTORILY TO MAKE INJECTION

MOLDED TUBES MEETING THE

REQUIREMENTS SPECIFIED IN 3.9.1. RESPECTIVE

RESINS ARE MADE BY EL PASO

PRODUCTS, ODESSA, TX 79761 AND EXXON CHEMICALS

AMERICAS, HOUSTON, TX,

77001.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS

IDENTIFIED AS ROLL

#3721 (THE FOLIAGE GREEN 502 AREA OF THE

PATTERN), AND REFERENCED FOR

SHADE ONLY. THIS STANDARD IS TEMPORARY UNTIL

FURTHER NOTICE.

(ref. T0708 - 5/23/06)

MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND

TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

CONTINUATION SHEET SPM1C1-08-R-0184 17 60

SECTION B

ADDITIONAL INFORMATION FOR A-A-52071:

NO ADDITIONAL INFORMATION

(Ref. T1456)

ADDITIONAL INFORMATION FOR MIL-B-371:

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS

MIL-C-44436, ROLL #3729 (THE FOLIAGE GREEN 502

AREA OF THE PATTERN), REFERENCED FOR SHADE ONLY.

THIS STANDARD IS TEMPORARY UNTIL FURTHER NOTICE.

INTERIM SPECIFICATION CHANGES TO MIL-B-371F:

PAGE 2, AT THE TOP OF THE PAGE AFTER 'CLASS 3'

ADD 'AND 4'. DELETE 'CLASS 4 -WATER AND

MILDEW-RESISTANT FINISH 2, 2' METHYLENE BIS

(4-CHLOROPHENOL)'.

PAGE 3, PARAGRAPH 2.2 OTHER PUBLICATIONS. ADD

THE FOLLOWING BELOW 'APPLICATION FOR COPIES

SHOULD BE ADDRESSED TO: ASTM

INTERNATIONAL, 100 BARR HARBOR DRIVE, WEST

CONSHOHOCKEN, PA. 19428'

'AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND

COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS:

QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE

ADDRESSED TO: AMERICAN ASSOCIATION OF TEXTILE

CHEMISTS AND COLORISTS (AATCC), P.O. BOX12215,

TRIANGLE PARK, NC 27709-2215)'

PAGE 4, 3.4 ADD AT THE END OF (SEE 6.2).

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS

IDENTIFIED AS ROLL #3721 (THE FOLIAGE GREEN 502

AREA OF THE PATTERN), AND REFERENCED FOR SHADE

ONLY. FOLIAGE GREEN 504 IS TO BE USED AS

SPECIFIED BY CONTRACT.

PAGE 4, PARA. 3.3.3, DELETE IN ITS ENTIRETY AND

SUBSTITUTE THE FOLLOWING: '3.3.3 POLYPROPYLENE

YARN (AS AN ALTERNATIVE FORTYPES III AND VII

BRAID). THE YARN SHALL BE TEXTURED

POLYPROPYLENE OF SUITABLE DENIER TO MEET THE

REQUIREMENTS OFTHIS DOCUMENT. POLYPROPYLENE

BRAID IS APPLICABLE ONLY TO THE ITEMS LISTED IN

PARAGRAPH 6.7.'

CONTINUATION SHEET SPM1C1-08-R-0184 18 60

SECTION B

AFTER PARA. 3.3.4: ADD THE FOLLOWING NEW PARA:

'3.3.5. 100% TEXTURED POLYESTER(AS AN

ALTERNATIVE FOR TYPES I, II, IV, AND VI).THE

YARN SHALL BE TEXTURED POLYESTER OF A SUITABLE

DENIER TO MEET THE REQUIREMENTS OF THIS

DOCUMENT.'

PAGE 5, PARA. 3.5.3 AFTER 'CLASS 3' ADD 'CLASS

4.' AFTER 'THE CLASS 3' ADD 'AND 4'.

PARA. 3.5.4, DELETE IN ITS ENTIRETY.

PAGE 8, ADD THE FOLLOWING TABLE IIA:

'TABLE IIA PHYSICAL REQUIREMENTS FOR POLYESTER

BRAID

TYPE DIAMETER WEIGHT PER NUMBER OF ENDS PER

(INCHES) 144 YARDS CARRIERS CARRIER

(OUNCES)

MIN.

II 5/32+/-1/32 28.0 8 1

VII 11/32+/-1/32 25.0 44 1

NUMBER YARN PLY PICKS BREAKING

OF ENDS BRAID CORE PER INCH STRENGTH

IN CORE MIN. (LBS.) MIN.

1/ 8 2 3 10 140

- - - 22 200

1/ UNDYED COTTON CORE YARNS.'

PAGE 10, PARA. 4.4.2.1 YARD-BY-YARD EXAMINATION,

LINE 9, DELETE '1.5' AND SUBSTITUTE '1.0' LINE

PAGE 13, TABLE V. END ITEM TESTS UNDER

REFERENCED TEST METHOD COLUMN, LINES 4 AND 5

DELETE '1600' AND SUBSTITUTE 'AATCC 20'

(ref. T0821 - May 18, 2006)

ADDITIONAL INFORMATION FOR MIL-DTL-10176:

INTERIM SPECIFICATION CHANGES TO MIL-DTL-10176K:

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE

CLOTH SHALL BE PIECE DYED.

3.7.3, LINE 2: DELETE '5.5' AND SUBSTITUTE '5.0'

ADD THE FOLLOWING PARAGRAPHS:

CONTINUATION SHEET SPM1C1-08-R-0184 19 60

SECTION B

'3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED

, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE

FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT

AND SHALL CONFORM TO THE REQUIREMENTS

SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN

4.4.4.

3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE

INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR

SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN

RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER

ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN

4.4.4.'

PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD

EXAMINATION, LINE 3, DELETE '10' AND SUBSTITUTE

'7', LINE 4, DELETE '12' AND SUBSTITUTE '8'

TABLE II, BELOW 'PH': ADD THE FOLLOWING UNDER

THEIR RESPECTIVE COLUMNS:

'WATER REPELLENCY:

SPRAY RATING:

INITIAL--------3.7.3.1---------5526

AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER

ALCOHOL WETTING AGENT SHALL BE USED TO INSURE

SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT

FINISH IS NOT RELEASED.

THE WATER REPELLANT TREATMENT MUST BE

APPLIED BEFORE THE SPONGING OPERATION.

ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.

CODE OF FEDERAL REGULATIONS

16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES

ACT REGULATIONS.

29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH

STANDARDS.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO U.S

GOVERNMENT PRINTING OFFICE, SUPERINTENT OF

DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC

20402-9328.)

PRINCIPLES AND METHODS OF TOXICOLOGY,

A. WALLACE HAYES (EDITOR), 1989, PP 394-396.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO RAVEN

CONTINUATION SHEET SPM1C1-08-R-0184 20 60

SECTION B

PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK,

NY 10036.)

TOXICITY. THE FINISHED CLOTH SHALL NOT

PRESENT A DERMAL HEALTH HAZARD WHEN USED

AS INTENDED.

TOXICITY ASSESSMENT. THE CONTRACTOR MUST

FURNISH INFORMATION WHICH CERTIFIES THAT

THE FINISHED PRODUCT IS COMPOSED OF MATERIALS

WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR

PROVIDE SUFFICIENT TOXICITY DATA TO SHOW

COMPATIBILITY WITH PROLONGED, DIRECT SKIN

CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD

INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION

STUDY IN LABORATORY ANIMALS AND A REPEATED

INSULT HUMAN PATCH TEST (MODIFIED DRAIZE

PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER

THE SUPERVISION OF A QUALIFIED DERMATOLOGIST

USING AT LEAST 100 FREE LIVING INDIVIDUALS.

INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,

NAVY SHADE 3346 ONLY.

APPLICABLE WHEN PROCURING CLOTH FOR THE

FOLLOWING ITEMS:

COAT, MANS, BLUE, DRESS, MIL-C-29107

COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628

SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631

SLACKS, WOMAN'S, MIL-S-29630

TROUSERS, MANS, CLASS 12 MIL-T-41828

(REF. T0969)

ADDITIONAL INFORMATION FOR MIL-P-15011:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1368)

ADDITIONAL INFORMATION FOR MIL-C-15065:

INTERIM CHANGES TO MIL-C-15065

PAGE 5, PARA. 3.3.2

LINE 6, AFTER 'TYPES' ADD 'IV'

LINE 7, AFTER 'HAVING': ADD 'SINGLE'

LINE 7, DELETE *FROM 100% POLYESTER).

LINE 10, AFTER 'NYLON' AND MONO-FILAMENT

INSERT 'OR POLYESTER'.

CONTINUATION SHEET SPM1C1-08-R-0184 21 60

SECTION B

LINE 11, DELETE '42' AND SUBSTITUTE '41'

LINE 12, DELETE '5.6' OUNCES' AND SUBSTITUTE

'5.4 OUNCES'

LINE 13, DELETE '0.060' AND SUBSTITUTE '0.055'

FOR MEN'S COAT FRONT, TYPE XI

COAT, MANS, DRESS BLUE MC, MIL-C-19156G

PATTERN DATE, DELETE COAT FRONT 31 MAY 1988

ADD; COAT FRONTS 29 OCT 1999

INTERIM CHANGES TO MIL-C-15065H:

PAGE 8, TABLE II, LIST OF PATTERN PARTS, TYPE IX

AND X, DELETE ENTIRELY AND SUBSTITUTE:

'BASIC MATERIAL FRONT 2

. CHEST PIECE 2

. WEDGE PIECE (SHOULDER) 4

HAIRCLOTH SHOULDER PIECE 2

FELT OR FLANNEL CHESTPADDING 2'

DELETE FIGURE 7 AND SUBSTITUTE NEW FIGURE 7

ATTACHED.

Page 6 ..Para. 3.4.

Line 2, after 'or flannel' add 'or needle punched polyester' Line 4, after 'felt' add 'or needle punched polyester' After para. 3.3.4.2, add the following new paragraph:

'3.3.4.3 Polyester. The polyester shall be unbleached, needle punched non-woven material.

The weight of the material shall be 3.4 (max), oz./sq. yd. The initial thickness shall be

0.055 inch and thickness after three commercial perchloethylene dry cleanings and pressings shall be 0.65 inch (max.), when tested using a 1-/8 diameter foot gage at 0.1 psi. The breaking strength in the machine direction shall be 20 lb. (min.) and in the cross machine direction shall be 40 lb. (min.) when tested as specified in ASTM D 5034. The polyester material shall not shrink or elongate more than

4.0 percent (max.) in the machine direction and

2.5 percent (max.) in the cross-machine direction after three commercial dry cleanings, when tested as specified in 4.4.1.2 (see 6.7)'.

CONTINUATION SHEET SPM1C1-08-R-0184 22 60

SECTION B

Page 10, Table II, under 'Component' for 'Type XVIII', after 'Felt or flannel', add 'or needle punched polyester' Page 11, Table II, under 'Component' for 'Type XXV', after 'Felt', add 'or needle punched polyester' Page 15, Table III, Operation 1.e., Line 1, after 'or flannel' add 'or needle punched polyester' Page 15, Table III, Operation 1.e.(1), Line 1, after 'felt' add 'or needle punched polyester' Page 15, Table III, Operation 1.e(1), for Type XVIII, line 1, after 'felt' add 'or needle punched polyester' Page 34, Table III, Operation 21.c., Line 1, after 'felt' add 'or needle punched polyester' Page 36, add the following new paragraphs:

4.4.1.2.1 Preparation of specimens. Three (3)

22 inch by 22 inch square specimens shall be cut parallel to the machine and cross machine directions to within 3 inches of the selvage from the polyester sample. An 18 inch square shall be marked as a minimum at each corner within the 22 inch specimen with indelible ink.

No marks shall be closer to the edge of the specimen than 1 inch. The specimen shall be commercially dry cleaned three times using perchoethylene solvent. Samples shall be bottom steam pressed after each dry cleaning for twenty seconds in a non-locked position and vacuumed for 10 seconds.

4.4.1.2.2 Dimensional stability calculation.

Each of the three 22 inches by 22 inches specimens shall be laid out without tension on a flat surface. Care should be taken that the specimens are free from wrinkles and creases.

The previously measured distances marked on the specimens (initial measurement, 18 inches) in the warp direction shall be remeasured to the nearest 1/16 inch, recorded, averaged and calculated for dimensional change. The dimensional change of the sample unit (3 specimens) shall be calculated to the nearest

0.10 percent using the following formula:

CONTINUATION SHEET SPM1C1-08-R-0184 23 60

SECTION B

Dimensional change, percent = (A-B)/A x 100

Where A = Average of initial measurements (18 inches) B = Average measurements after dry cleaning Page 44, Table V, under 'Examine: for 'Type XXV fronts', line 2, delete 'Shoulder piece felt:' and substitute 'Shoulder piece'.

Page 48, add the following new paragaraph:

6.7 Polyester material. A suggested style and

source for the specified material is Style CTF006-3, Product No. F012772 available from National Nonwovens, P.O. Box 150, Easthampton, MA 01027, Telephone (413) 527-3445 (Ref. T1552)

ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.

ASTM-D-5118 IS AUTHORIZED FOR USE IN LIEU OF

MIL-B-17757

(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-B-20289:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T0863)

ADDITIONAL INFORMATION FOR MIL-C-29137:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1562)

ADDITIONAL INFORMATION FOR MIL-C-44192:

INTERIM CHANGES TO MIL-C-44192:

PAGE 4, PARA 3.2.4 AFTER 'II' ADD 'FOR DRESS

COATS AND TYPE 'III' FOR ALL WEATHER COATS.'

PAGE 11, PARA 30.4, DELETE AND SUBSTITUTE:

CONTINUATION SHEET SPM1C1-08-R-0184 24 60

SECTION B

'30.4 CONTAINER CLOSURE. THE CONTAINER SHALL BE

CLOSED BY THE USE OF 3 INCH WIDE TAPE CONFORMING

TO TYPE II, CLASS 2 OF PPP-T-45. THE TAPE SHALL

BE CENTERED OVER EACH EXPOSED SEAM INCLUDING

THE DISPENSING DOOR SLITS AND EXTENDED OVER ALL

THE CORNERS AND EDGES WITH A MINIMUM OF 2 INCHES

ONTO THE ADJACENT BOX PANELS. THE MANUFACTURERS

JOINT AND THE EDGES AROUND THE BOTTOM OPENING

OF THE LID AFTER IT IS PLACED OVER THE

CONTAINER BOX BODY NEED NOT BE TAPED.'.

NOTE: WHEN HANGER PACKS ARE SPECIFIED FOR ALL-

WEATHER COATS, COATS SHALL BE PACKAGED, MARKED

AND PALLETIZED IN ACCORDANCE WITH MIL-C-44192,

WITH FRONTS LAPPING AND BUTTONED.

THE FOLLOWING APPLIES:

TEN (10) COATS OF ONE CLASS AND SIZE SHALL BE

PACKED IN A TYPE I CONTAINER (HANGER PACK)

EXCEPT THAT THE DIMENSIONS OF THE CONTAINER

SHALL APPROXIMATE 24 X 21 INCHES AND THE DEPTH

OF THE CONTAINER SHALL BE 48 +0/-2 INCHES.

HANGER PACK SHIPPING CONTAINERS SHALL BE

MARKED A/C TO IDENTIFY THE LEVELS OF PACKAGING/

PACKING.

(Ref. T0806)

ADDITIONAL INFORMATION FOR MIL-C-44296:

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER

'AND' INSERT 'STITCH-REINFORCED NONWOVEN'.

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN

'TYPE X-CIRCULAR KNIT SUBSTRATE' AND 'CLASS 1'

INSERT 'TYPE X1- 'STITCH-REINFORCED NONWOVEN'.

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW

'TYPE IX' ADD 'TYPE X - CIRCULAR KNIT SUBSTRATE'

PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD

FOLLOWING NEW PARAGRAPH: '2.1.3 OTHER

PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A

PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED

HEREIN. UNLESS OTHERWISE SPECIFIED,THE ISSUES OF

THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE

THOSE LISTED IN THE ISSUE OF THE DODISS

SPECIFIED IN THE SOLICITATION. UNLESS OTHERWISE

CONTINUATION SHEET SPM1C1-08-R-0184 25 60

SECTION B

SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT

LISTED IN THE DODISS SHALL BE THE ISSUES OF THE

NONGOVERNMENTAL DOCUMENTS WHICH ARE CURRENT

ON THE DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND

COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS

QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE

ADDRESSED TO AMERICAN ASSOCIATION OF TEXTILE

CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215,

TRIANGLE PARK, NC 27709-2215)'

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH:

'3.1.2.10 TYPE X. TYPE X SHALL BE A CIRCULAR

KNIT. WHEN SPECIFIED (SEE 6.2), THE FACE SIDE

SHALL BE NAPPED.'

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE

FOLLOWING:

'3.1.2.11 TYPE X1. TYPE X1 SHALL BE STITCH-

REINFORCED NONWOVEN WHEREBY A SERIES OF

CHAINSTITCHING IS SEWN IN THE MACHINE

DIRECTION OF THE SUBSTRATE IN ORDER TO

REINFORCE THE NONWOVEN CONSTRUCTION.'

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS.

ADD THE FOLLOWING NEW TABLE AFTER TABLE VII:

'TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

. ADHESIVE) STRENGTH

. OZ/SQ/YD. LBS. (MIN.

. MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER.'

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.:

AFTER TABLE'V111' ADD NEW TABLE 1X:

'TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

. BREAKING STRENGTH

. WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

. FORCEMENT

. A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING

PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE

MULTIFILAMENT THREAD USING CHAINSTITCH STITCH

TYPE WITH CHAINSTITCH LOOPS ON FUSIBLE SIDE TO

PROTECT FROM UNRAVELING.'

CONTINUATION SHEET SPM1C1-08-R-0184 26 60

SECTION B

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE '(EXCEPT CLASS 5)' AND

SUBSTITUTE '(EXCEPT TYPE IX WHEN USED AS FUSIBLE

SEAM TAPE AND CLASS 5)'.

- LINES 7 AND 8, DELETE 'OR SHEETING MATERIAL'.

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE '30' AND

SUBSTITUTE '20'. LINE 24, DELETE '45' AND

SUBSTITUTE '30'.

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST

METHOD COLUMN, LINES 2 AND 3 DELETE '1600' AND

SUBSTITUTE 'AATCC 20'.

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH

PROCEDURE (INITIAL AND AFTER LAUNDERING/DRY

CLEANING). DELETE THE FIRST AND SECOND SENTENCES

IN THEIR ENTIRETY AND SUBSTITUTE: 'CUT A 12 INCH

WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE

OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR

CONTRACT USE (SEE 6.5).'

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE

FOLLOWING:

' E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS

HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND

STAY APPLICATION FOR LARGE OR SMALL PART

FUSIBLES AND IS INTENDED TO PROVIDE VERTICAL

STABILITY AND ABRASION RESISTANCE.'

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE

PROCEDURE. INSERT THE FOLLOWING BETWEEN THE

FIRST AND SECOND SENTENCES: 'IN SOME CASES,

OUTERSHELL SAMPLES REPRESENTATIVE OF SEPARATE

PRODUCTION LOTS MAY BE USED TO DETERMINE IF

DIFFERENT FINISHES MAY AFFECT BONDING STRENGTH.'

(Ref. T0998)

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND

REPLACED BY THE FOLLOWING: INTERNATIONAL

STANDARDS ISO 9001:2000 OR AMERICAN SOCIETY FOR

QUALITY ASQ 2003 VERSION.

HIGHER LEVEL INSPECTION SYSTEM:

THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH

YOUR BID PROPOSAL FOR EVALUATION AND APPROVAL BY

CONTINUATION SHEET SPM1C1-08-R-0184 27 60

SECTION B

DSCP'S CONTRACTING OFFICER.

INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT

LIMITED TO THE INTERNATIONAL STANDARDS ISO 9002

OR ASQ 2003 MAY BE UTILIZED IF TAILORED TO THE

SPECIFIC QUALITY ASSURANCE REQUIREMENTS IN THIS

SOLICITATION.

(Ref. T1286 - 9/11/06)

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS

HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING

FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST

SENTENCE AND SUBSTITUTE: 'THE SPECIMEN SHALL BE

CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE

OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF

SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF

THE SPECIMEN EXTENDS BEYOND THE CENTER OF

ROTATION (FACE OF THE VISE), AND WITH THE LONG

EDGE PARALLEL TO THE FACE OF THE DIAL PLATE'.

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE

WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE

'B-97' AND SUBSTITUTE 'B-91'.

THE FOLLOWING METHODS ARE IDENTIFIED AS

SPECIFYING OZONE DEPLETING SUBSTANCES: 1100,

1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS

REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE,

ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN

OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM)

AND IS THEREFORE PROHIBITED. THE USE OF EITHER

ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS

ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL;

CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3

DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: 'THE SPECIMEN SHALL BE CLAMPED

FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF

THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES

WITHIN THE CLAMP AND 1' OF THE SPECIMEN EXTENDS

BEYOND THE CENTER OF ROTATION (INNER FACE OF THE

CONTINUATION SHEET SPM1C1-08-R-0184 28 60

SECTION B

VISE) AND WITH THE LONG EDGE PARALLEL TO THE

FACE OF THE DIAL PLATE.'

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR

TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8:

DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS

AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: 'THE SPECIMENS AND BALLAST SHALL

BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN

A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF

140-180 DEG. F. THIS TEMPERATURE RANGE

CORRESPONDS TO A SETTING OF 'HIGH' ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING

SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES

ARE DRY IN A ROTATING TUMBLE DRYER.'

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE

BEGINNING WITH 'THE SPECIMENS AND BALLAST' IN

ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:

'THE SPECIMENS AND BALLAST SHALL BE SEPARATED,

OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED

DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A

SETTING OF 'HIGH' ON THE TEMPERATURE INDICATOR

ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLES ARE DRY.'

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS;

DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER

OF DETERMINATIONS ADD 'PER SAMPLEUNIT'. PAGE 1,

PARA. 4: DELETE 'APPARATUS' AND SUBSTITUTE

'APPARATUS'. PAGE 1, PARA. 5.1, LINE 3: AFTER

'AT' DELETE'APPROXIMATELY'.

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF'

ADD '+-'. LINE 6: AFTER 'TO' ADD '+-'.

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND

SUBSTITUTE WITH THE FOLLOWING:'5.3 MOUNT A

SPECIMEN TIGHTLY ACROSS THE ELECTRODES,

CENTERING IT OVER THE SENSOR OPENING. THE

SURFACE OF THE TEST SPECIMEN (BACK OR FRONT)

SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE

RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY

THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE

LEVELS OF LESS +500 VOLTS YIELD THE BEST

RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR

A PERIOD OF 20 SECS. AT THE END OF THE 20

SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS)

CONTINUATION SHEET SPM1C1-08-R-0184 29 60

SECTION B

SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY

GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN

WITH RESPECT TO TIME SHALL BE PLOTTED ON THE

RECORDER. NOTE: IN SOME CASES, THE TEST

EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME

INFORMATION AND A CHART RECORDER IS NOT

NECESSARY.'

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE

BEGINNING WITH 'IF THE SPECIMEN DID' IN ITS

ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:

'RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING

POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM

VOLTAGE LEVEL ACHIEVED.'

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING

PRIOR TO 1ST SENTENCE: 'REVERSE VOLTAGE POLARITY

REPEAT MEASUREMENT, ANDRECORD RESULTS.'

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE

AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE

SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING

DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR

EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF)

TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS

OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,

THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF

THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND

FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND

THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS

GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND

FILLING DIRECTIONS. IT SHALL BE INDICATED

WHETHER THE FABRIC ISACCEPTABLE OR

NON-ACCEPTABLE.'

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE

406C AND SUBSTITUTE WITH '406D'.

AFTER PARA. 7.1, ADD THE FOLLOWING: '7.2 NOTE:

IF THE MODEL 406D STATIC DECAY METER, OR

EQUIVALENT, IS USED, A CHART RECORDER ISNOT

MANDATORY FOR THE TEST.'

(Ref. T0215 - 05/17/07)

CONTINUATION SHEET SPM1C1-08-R-0184 30 60

SECTION B

ADDITIONAL INFORMATION FOR ASTM-D6193-97(2004):

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T8068 - May 18, 2006)

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF

DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE -

DATED 19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING

CONTAINERS OF ITEMS IN THE

DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND

TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN

THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR

SHIPPING CONTAINERS OF

DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE

MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON

ALL SHIPPING

CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL

BE PLACED INSIDE THE

LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT.

THE WORDS 'PACKING LIST

HERE' SHALL BE STENCILED, NOT HAND LETTERED, ON

THE CONTAINER.

(Ref. T0303 - May, 2006)

ADDITIONAL INFORMATION:

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.

CONTINUATION SHEET SPM1C1-08-R-0184 31 60

SECTION B

ADDITIONAL INFORMATION FOR MIL-STD-1608:

INTERIM CHANGES TO MIL-STD-1608C:

PAGE 14, BEFORE 'COAT BUTTONED ON FORM' ADD 'B.'

PAGE 17: DEFECT E.4., LINE 1, AFTER 'TO' ADD

'ROLL OUTWARD AND NOT'.

PAGE 19: TABLE II, AFTER DEFECT XXI SLEEVE PARA.

E. ADD 'NOTE: THE NORMAL HANGING POSITION FOR

THE FRONT EDGE OF THE SLEEVE IS THE CENTER OF

THE TOP EDGE OF THE LOWER PATCH POCKET.'

PAGE 22: BEFORE 'XXIX', ADD 'C. COAT SPREAD OUT

ON TABLE'

PAGE II, ADD NEW DOCUMENT 'MIL-C-29628 (NU)

COAT, WOMEN'S, BLUE DRESS'.

MIL-STD-1608C PAGE 7, TABLE I DELETE IN ITS

ENTIRETY AND SUBSTITUTE 'TABLE I SAMPLING

PROVISIONS'.

NORMAL INSPECTION

LOT SZ SAMP SZ MAX ACCP MAX ACCP PT VALU

. NO. FOR

. SELECTED 3&2 PT 3,2,1 PT

. (*DEFECT) DEFECTS DEFECTS

UP THRU 90 20 0 3 7

91- 150 32 0 4 11 151-280 50 0 7 13 281-500 80 0 9 19 501-1200 125 1 14 27 1201-3200 200 1 18 36 3201-10,000 315 2 25 55 10,001-35,000 500 3 36 81

35,001 & OVER 800 5 55 122

TIGHTENED INSPECTION

UP THRU 90 20 0 3 5

91-150 32 0 3 7 151-280 50 0 5 11 281-500 80 0 7 14 501-1200 125 1 11 21 1201-3200 200 1 13 31 3201-10,000 315 2 22 47 10,001-35,000 500 3 33 69

35,001 & OVER 800 5 49 104

REDUCED INSPECTION

CONTINUATION SHEET SPM1C1-08-R-0184 32 60

SECTION B

UP THRU 280 20 0 2-4 7

281-500 32 0 3-7 12 501-1200 50 0 6-10 15 1201-3200 80 0 7-10 24 3201-10,000 125 1 13-18 31 10,001-35,000 200 1 17-23 47

35,001 & OVER 315 2 23-29 69

NOTE: FOR THE REDUCED POINT VALUES OF THE

REDUCED INSPECTION ON 3 & 2 POINT DEFECTS. IF

THE FIRST VALUE IS EXCEEDED, BUT THE SECOND

VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT

REINSTATE NORMAL INSPECTION (SEE 5.5.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT

VALUE.

(Ref. T0344)

ADDITIONAL INFORMATION: MIL-STD-731 IS HEREBY

CANCELLED, NOTICE 2 DATED 12/5/95. ASTM-D-6199

- 'STANDARD PRACTICE FOR QUALITY OF WOOD MEMBERS

OF CONTAINERS AND PALLETS' HAS BEEN ADOPTED AS A

REPLACEMENT AS OF 7/29/98.

(ref. T0340 - May…