RFQ SPM1C1-08-Q-0329.pdf

PAGE OF PAGES

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDEREQUEST FOR QUOTATIONS

2. DATE ISSUED1. REQUEST NO. 3. REQUISITION/PURCHASE REQUEST NO. RATING4. CERT. FOR NAT. DEF.

UNDER BDSA REG.2

6. DELIVER BY (Date)5. ISSUED BY

7. DELIVERY

OTHER

FOB DESTINATION (See Schedule)

9. DESTINATION

a. NAME OF CONSIGNEE

8. TO: See Schedule

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

11. SCHEDULE (Include applicable Federal, State and local taxes)

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: .

b. Prices quoted are:

Contained in Commercial Catalog or Published Price List No. dated page .

Contained in Internal Price List No. dated , which may be examined at our facility.

Commercial sales of comparable quantities: Quantity ; Price ;

Customer Other (provide basis)

c. FOB Point: Destination

Origin Shipping Point (City, State)

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: .

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: Vendor Toll-Free Number:

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE12. DISCOUNT FOR PROMPT PAYMENT

NOTE: Additional provisions and representations are not attached.are

15. DATE OF QUOTATION14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER CAGE

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or print) b. TELEPHONE

AREA CODEc. COUNTY

NUMBERd. CITY e. STATE f. ZIP CODE c. TITLE (Type of Print)

PerFORM (DLA)AUTHORIZED FOR LOCAL REPRODUCTION Previous edition not usable.

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AND/OR DMS REG. 1

Vendor E-mail:

X 1 32

SPM1C1-08-Q-0329 2008 MAY 29

DEFENSE SUPPLY CENTER PHILADELPHIA

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

Jennifer Truesdale, PCPQCCE

PHONE: (215) 737-2343 FAX: (215)737-2486

E-mail: Jennifer.Truesdale@dla.mil

Deliver within 120 days ADO

X

2008 JUN 13

X

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET

SPM1C1-08-Q-0329 2 32

**** In pricing your offer please refer to the delivery schedule, nsn's upcs, shipping destinations and square inch table on pages 2 and 3. Enter your offer in space provided on page 21. ****

Please see attachment for packaging/labeling information.

Cap, Garrison, Woman's Navy Khaki 3729 Mil-C-15507L Date: 04/25/1986 Pattern Date: 18 Aug 1987

PGC 02118

Delivery Schedule

NSN Size Total 120days 150 days 180days 8410-01-312-7741 20 1/2 70 70 8410-01-312-7742 21 140 70 70 8410-01-312-7743 21 1/2 70 70 8410-01-312-7744 22 280 140 140 70 8410-01-312-7745 22 1/2 560 140 140 280 8410-01-312-7746 23 840 140 420 280 8410-01-312-7747 23 1/2 140 70 70 8410-01-312-7748 24 490 140 140 210 8410-01-312-7740 20 70 70 2,660 910 910 840

Destinations:

VSTN SD0119

Peckham Vocational Industries INC.

4110 N Grand River Lansing, MI 48906

UPC Codes:

PGC: 02118

PGC UPC NSN Nomen Size

02118 718020 337715 8410013127741 CAP,GARRISON 20 1/2

02118 718020 337722 8410013127742 CAP,GARRISON 21

02118 718020 337739 8410013127743 CAP,GARRISON 21 1/2

02118 718020 337746 8410013127744 CAP,GARRISON 22

02118 718020 337753 8410013127745 CAP,GARRISON 22 1/2

02118 718020 337760 8410013127746 CAP,GARRISON 23

02118 718020 337777 8410013127747 CAP,GARRISON 23 1/2

02118 718020 337784 8410013127748 CAP,GARRISON 24

02118 718020 337708 8410013127740 CAP,GARRISON 20

CONTINUED ON NEXT PAGE

SPM1C1-08-Q-0329 3 32

[*] Below is the table of square inches by size for the item procured and is hereby incorporated and made a part of this solicitation and resultant contract (s). This table shall be used to compute adjustments of basic material usage due to size changes clause 52.245.9P20. Changes in materials will be computed by multiplying the total calculated square inch adjustment for the basic material by the following percentage factors:

Cap, Garrison, Woman's Navy Khaki 3729 Mil-C-15507L Date: 04/25/1986 Pattern Date: 18 Aug 1987

Size SQ IN 20 0173 20 1/2 0186 21 0199 21 1/2 0212 22 0225 22 1/2 0238 23 0251 23 1/2 0264 24 0277

SPM1C1-08-Q-0329 4 32

SECTION B

PR:

NSN: 8410-01-312-7740

ITEM DESCRIPTION:

PGC 02118

CAP, WOMAN'S, GARRISON, TYPE III,

CLASS 2, KHAKI 3729

ADDITIONAL INFORMATION FOR MIL-C-15507:

CAP, GARRISON, WOMANS', TYPE III,

CLASS 2, KHAKI 3729

PATTERN DATE: 18 AUG 1987

THE FOLLOWING STANDARD SAMPLE INFORMATION IS

APPLICABLE:

CLOTH, TWILL, POLYESTER/COTTON OF MIL-C-29127

SHADE KHAKI 3729, PIECE #02284 APPLICABLE

FOR: SHADE, FINISH,AND COLORFASTNESS: LIGHT,

LAUNDERING, PERSPIRATION, WET-DRY CLEANING.

INTERIM CHANGES TO MIL-C-15507

PAGE 1, PARA.1.2, DELETE IN ITS ENTIRETY AND

SUBSTITUTE 'CLASSIFICATION. THE CAP SHALL BE OF

ONE TYPE (TYPE III) IN THE FOLLOWING CLASSES AND

AND SIZES (SEE 6.2)'

PAGE 1, ADD '1.2 CLASSES

CLASS 1- POLYESTER/WOOL BLUE 3346

CLASS 2- POLYESTER/COTTON KHAKI 3729'

PAGE 2, SPECIFICATIONS ,FEDERAL

ADD:'A-A-50199, THREAD, POLYESTER CORE, COTTON-

OR POLYESTER-COVERED'.

ADD: 'A-A-52094, THREAD, COTTON'

ADD: 'A-A-59709, CLOTH, BUNTING, NYLON, AND

NYLON AND WOOL'

DELETE 'DDD-L-20, LABEL, FOR CLOTHING, EQUIPAGE,

AND TENTAGE'

DELETE 'NN-P-71, PALLET, MATERIAL HANDLING, WOOD

STRINGER, CONSTRUCTION 2 WAY AND 4 WAY ENTRY'

DELETE, 'CCC-C-476 CLOTH, BUNTING, NYLON, AND

NYLON AND WOOL'

DELETE 'V-T-276, THREAD, COTTON'

PAGE 2, SPECIFICATIONS, MILITARY

ADD: 'MIL-C-29127, CLOTH, TWILL, POLYESTER/

COTTON (CREASE RESISTANT FINISH)'

ADD: 'MIL-DTL-32075, LABEL, FOR CLOTHING,

SPM1C1-08-Q-0329 5 32

SECTION B

EQUIPAGE AND TENTAGE'

ADD: 'MIL-DTL-3738, CLOTH ELASTIQUE, WOOL'

DELETE 'MIL-T-43548, THREAD, POLYESTER CORE:

COTTON-, RAYON-, OR POLYESTER-COVERED'

DELETE 'MIL-P-15011, PALLET, MATERIAL, HANDLING,

WOOD, POST, CONSTRUCTION, 4 WAY ENTRY'

DELETE 'MIL-B-17757, BOXES, SHIPPING, FIBERBOARD

(MODULAR SIZES)'

DELETE 'MIL-E-20652, EYELETES, METALLIC, AND

EYELET WASHERS, METALLIC'

DELETE 'MIL-C-3738, CLOTH, ELASTIQUE, WOOL'

STANDARDS, FEDERAL

DELETE 'FED-STD-191, TEXTILE, TEST METHODS'

DELETE 'FED-STD-751, STITCHES, SEAMS AND

STITCHINGS'

MILITARY

DELETE 'MIL-STD-147, PALLETIZED UNIT LOADS'

PAGE 2, PARA.2.1.2, AT THE END OF THE PARAGRAPH

ADD: 'NASM 20652/1, EYELETS, METALLIC, AND

EYELET WASHER, METALLIC'

PAGE 2, PARA.2.1.2, LINE 7, DLETE ALL

INFORMATION UP TO 'THE AMERICAN ASSOCIATION

OF TEXTILES CHEMISTS AND COLORISTS'

ADD: 'AATCC 61, TEST 1, COLORFASTNESS TO

LAUNDERING OF WOOL, SILK, RAYON AND OTHER

TEXTILE MATERIALS, LAUNDER-OMETER METHOD

AATCC132, COLORFASTNESS TO WET DRY CLEANING'

ADD: 'ASTM, INTL., ASTM-D6193, STITCHES, SEAMS

AND STITCHINGS

(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

ASTM INTL., PO BOX 3700, 100 BARR HARBOR DRIVE,

WEST CONSHOHOCKEN, PA 19428)'

PAGE 4, PARA.3.3.1, AFTER PARAGRAPH TITLE DELETE

CONTENTS OF PARAGRAPH AND SUBSTITUTE THE

FOLLOWING, 'THE BASIC MATERIAL FOR THE CAP SHALL

CONFORM TO THE REQUIREMENTS SPECIFIED IN

PARAGRAPHS 3.3.1.1 AND 3.3.1.2.'

PAGE 4, ADD NEW PARAGRAPHS:

'3.3.1.1 CLASS 1, CAP. THE BASIC MATERIAL USED

USED FOR THE SIDE, CROWN SIDE, CROWN TOP

(GUSSET) AND APRON PIECES OF THE GARRISON CAP

(SEE 3.5.1), SHALL BE POLYESTER/WOOL TROPICAL

CLOTH CONFORMING TO MIL-C-24910. THE MATERIAL

SHALL MATCH BLUE SHADE 3346.

3.3.1.2 CLASS 2, CAP. THE BASIC MATERIAL USED

SPM1C1-08-Q-0329 6 32

SECTION B

FOR THE CROWN SIDE, CROWN TOP(GUSSET) AND APRON

PIECES OF THE GARRISON CAP (SEE 5.5.1),

POLYESTER/WOOL TROPICAL CLOTH CONFORMING TO

MIL-C-29127. THE MATERIAL SHALL MATCH KHAKI

SHADE 3729.'

PARE 4, PARA.3.3.2, LINE 3, DELETE 'CCC-C-476'

AND SUBSTITUTE 'A-A-55709' AND LINE 4, AFTER

'SHADE' INSERT 'FOR CLASS 1 CAPS, AND TAN FOR

CLASS 2 CAPS.'

PAGE 4, PARA.3.3.3, LINE 3, AFTER 'SHADE',

INSERT 'FOR CLASS 1 CAPSS, AND TAN FOR CLASS 2

CAPS.'

PAGE 4, PARA 3.3.4, LINE 3, DELETE 'OR MIL-T-

43548' AND SUSBTITUTE 'A-A-50199'. LINE 4, AFTER

I, DELETE 'IC2'. AFTER 'PLY' DELETE 'OR V-T-276'

AND SUBSTITUTE 'OF A-A-52094'. LINE 5, DELETE

LAST SENTENCE OF PARAGRAPH AND SUBSTITUTE 'THE

THREAD COLOR SHALL BE BLACK AA, CABLE NO. 66043

FOR CLASS 1 AND KHAKI P-1, CABLE NO. 66019 FOR

CLASS 2.'

PAGE 5, PARA 3.3.4.1, LINE 3 AND LINE 6, DELETE

'V-T-276 OR MIL-T-43548' AND SUBSTITUTE 'A-A-

12394 OR A-A-50199'

PAGE 5, PARA 3.3.5, EYELETS, LINE 1, AFTER

'EYELETS' INSERT 'FOR CLASS 1 CAPS.' AND LINE

3, DELETE 'MIL-E-20652/1 AND SUBSTITUTE

'NASM 20652/1'

PAGE 5, 3.3.6.1, LINE 2, DELETE 'DDD-L-20' AND

SUBSTITUTE 'MIL-DTL-32075'

PAGE 5, PARA.3.3.6.2, LINE 2, DELETE

'DDD-L-20' AND SUBSTITUTE 'MIL-DTL-32075' AND

AFTER 'SHALL BE' INSERT '1/16 TO' AND LINE 6

ABOVE THE 'LAUNDERING INSTRUCTIONS' INSERT

'CLASS 1'. AT THE END OF THE PARAGRAPH INSERT

'CLASS 2:

LAUNDERING INSTRUCTIONS

MACHINE WASH-NORMAL CYCLE

WARM WATER-DO NOT BLEACH

TUMBLE DRY-MEDIUM HEAT-REMOVE PROMPTLY OR

FOLLOW NAVEDTRA MANUAL 414-01-45-81, FORMULA II'

PAGE 5, PARA.3.4, LINE 4, AFTER 'APRON' INSERT

'ON THE CLASS 1 CAP ONLY.'

PAGE 6, PARA. 3.5, AFTER PARAGRAPH TITLE DELETE

PARAGRAPH CONTENTS AND SUBSTITUTE THE FOLLOWING:

SPM1C1-08-Q-0329 7 32

SECTION B

'STANDARD PATTERNS, TO BE USED TO CUT WORKING

PATTERNS, WILL BE FURNISHED BY THE GOVERNMENT

(SEE 6.3 AND 6.6). THE WORKING PATTERNS WILL BE

IDENTICAL TO THE GOVERNMENT PATTERNS. NEITHER

THE GOVERNMENT PATTERNS NOR THE WORKING PATTERNS

SHALL BE ALTERED IN ANY WAY, EXCEPT THAT

ADDITIONAL NOTCHED FOR USE DURING CONSTRUCTION

ARE PERMITTED ON THE WORKING PATTERNS. MINOR

MODIFICATION ARE PERMITTED WHERE

NECESSARY WHEN USING AUTOMATIC EQUIPMENT. THESE

MODIFICATIONS SHALL NOT ALTER THE DIMENSIONAL,

SERVICEABILITY, OR APPEARANCE REQUIREMENTS CITED

IN THE SPECIFICATION. THE PATTERNS ALLOW FOR 1/4

INCH SEAM ALLOWANCE, UNLESS OTHERWISE INDICATED

IN TABLE II.'

PAGE 9 THRU 11, OPERATIONS 4A, 4B, 4C, 4D, 4E,

4F, 4G, 5B, 6, 7A, AND 7B; DELETE '12-14' UNDER

'STCH/IN' COLUMN AND SUBSTITUTE '9-12'.

PAGE 9, TABLE II, OPERATION 4B, LINE 3, DELETE

'IN ACCORDANCE WITH PATTERN NOTCHES'.

PAGE 9, OPERATION 4E, LINE 1, DELETE 'NOTCH' AND

SUBSTITUTE 'CLIP THE '.

PAGE 10, TABLE II, OPERATION 7A, UNDER SEAM/STCH

TYPE - DELETE COMBINATION OF 'LSA-2-2 AND

SSAA-2' SUBSTITUTE 'SSAT-2'

INTERIM SPECIFICATION CHANGES TO MIL-C-15507L:

PAGE 12, TABLE III DELETE TABLE IN ITS ENTIRETY

AND SUBSTITUTE NEW TABLE AS FOLLOWS:

......SIZE 20 20-1/2 21 21-1/2 22

CENTERBACK 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8

(A)(APRON)SIZE 22-1/2 23 23-1/2 24

CENTERBACK 1-11/16 1-3/4 1-13/16 1-7/8

CENTERFRONT 1-7/8 2 2-1/8 2-1/4 2-3/8

(B)(APRON) 2-1/2 2-5/8 2-3/4 2-7/8

CENTER SIDE 1-3/4 1-7/8 2 2-1/8 2-1/4

(C) (APRON) 2-3/8 2-1/2 2-5/8 2-3/4

HEIGHT OF 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4

CAP(D) 3-7/8 4 4-1/8 4-1/4

WIDTH OF 2-3/8 2-11/16 2-3/4 3 3-1/16

CROWN (E) 3-1/4 3-7/16 3-5/8 3-3/16

TOLERANCE +/-1/8 INCH FOR ALL MEASUREMENTS.

PAGE 14, TABLE IV, NYLON BUNTING CLOTH, COLOR-

FASTNESS TO LAUNDERING

DELETE '5622' AND SUBSTITUTE 'AATCC-132'

DELETE '5614' AND SUBSTITUTE 'AATCC 61, TEST 1A'

PAGE 17, PARA.5.2.1, LINE 1, DELETE 'THIRTY-

SPM1C1-08-Q-0329 8 32

SECTION B

FIVE(35)' AND SUBSTITUTE 'SEVENTY(70)'

PAGE 17, PARA.5.2.2, LINE 1, DELETE 'THIRTY-

FIVE(35)' AND SUBSTITUTE 'SEVENTY(70)'

PAGE 18, PARA.6.5, LINE 2, DELETE 'MIL-C-3738'

SUBSTITUTE 'MIL-DTL-3738'. LINE 2 DELETE

'705' AND SUBSTITUTE '2212'

PAGE 20, FIGURE 1, INSERT: 'NOTE: EYELET IS FOR

CLASS 1 CAP ONLY'.

(Ref. W2118)

DELETE CURRENT 'BARCODE LABEL/TAG'

REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG. EACH ITEM SHALL BE INDIVIDUALLY

BAR-CODED WITH A PAPER TAG FOR PERSONAL

CLOTHING ITEMS. THE PAPER USED FOR THE TAGS

SHALL BE STANDARD BLEACHED SULFATE HAVING A

BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH

FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT

PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.

THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE

A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)

ASSIGNED FOR ALL NSNS BY THE GOVERNMENT.

THE INITIAL 'UPC' MUST APPEAR BENEATH THE

CODE. THE BAR CODES FOR NSN AND UPC SHALL BE

A MEDIUM TO HIGH DENSITY AND SHALL BE

LOCATED SO THAT THEY ARE COMPLETELY VISIBLE

ON THE ITEM WHEN IT IS FOLDED AND PACKAGED

AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE

NO DAMAGE TO THE ITEM.

PACKAGING SECTION. ADD THE FOLLOWING:

NOTE: UNIVERSAL PRODUCT CODE INFORMATION

THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE

(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON

WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/

TAGS:

BAR CODE OMITTED OR NOT MINOR A

READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) MINOR A

OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM MINOR A

SPM1C1-08-Q-0329 9 32

SECTION B

CAUSES DAMAGE TO THE ITEM MAJOR

APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF

DOCUMENTS IS APPLICABLE TO THIS PROCUREMENT:

ADDITIONAL INFORMATION FOR A-A-52094A:

SIZE 16; TWIST Z; TYPE II; 16.0 OUNCES NOMINAL; GLAZED FINISH

NO ADDITIONAL INFORMATION

(Ref. T1481 - 4/08).

ADDITIONAL INFORMATION FOR CCC-C-476:

CCC-C-476 HAS BEEN

REPLACED BY A-A-59709

MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE

REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

ADDITIONAL INFORMATION FOR NN-P-71:

NO ADDITIONAL INFORMATION FOLLOWS..

ADDITIONAL INFORMATION FOR MIL-C-3738:

WITH THE FOLLOWING INTERIM CHANGES TO MIL-C-3738:

NOTE: REDUCED AQL'S APPLY AS FOLLOWS:

PAGE 2, 2.1.2, DELETE LINES 4 THRU 7 AND

SUBSTITUTE:

'U.S. DEPARTMENT OF AGRICULTURE

METHODS OF TEST FOR GRADES OF WOOL TOP

(APPLICATION FOR TEST COPIES SHOULD BE ADDRESSED

TO THE U.S. DEPARTMENT OF AGRICULTURE, AGRI-

CULTURAL MARKETING SERVICE, WASHINGTON, DC

20402.)'

PAGE 6, AFTER 4.4.2, ADD THE FOLLOWING:

'4.4.2.1, WOOL. THE WOOL SHALL BE EXAMINED FOR

GRADE (SEE 3.3.1) IN THE UNDYED TOP FORM BY

COMPARISON WITH THE APPLICABLE U.S. STANDARD

(SEE 2.1.2). IN THE EVENT OF A DISPUTE, THE WOOL

GRADE SHALL BE DETERMINED BY THE WIDTH METHOD

(WEDGE). THE SAMPLE UNIT SHALL BE 1 YARD OF TOP,

PRIOR TO DYEING. THE SAMPLE SIZE (NUMBER OF

SAMPLE UNITS) SHALL BE AS LISTED BELOW. THE LOT

SIZE SHALL BE EXPRESSED IN UNITS OF ONE POUND.

THE RESULTS FROM EACH SAMPLE UNIT SHALL BE

REPORTED SEPARATELY. THE LOT SHALL BE UNACCEPT-

SPM1C1-08-Q-0329 10 32

SECTION B

ABLE IF A SINGLE SAMPLE UNIT FAILS TO MEET THE

REQUIRED GRADE.

LOT SIZE (POUNDS) SAMPLE SIZE

800 OR LESS 2

801 UP TO AND INCLUDING

22,000 3

22,001 AND OVER 5

PARA. 4.4.3.1 POINT COUNT EXAMINATION, SECOND

LINE, DELETE '10' AND SUBSTITUTE '7'. AT END OF

PARAGRAPH, ADD THE FOLLOWING: 'EXCEPT THAT

BOWED OR SKEWED FILLING YARNS SHALL NOT BE

SCORED.'

PAGE 7, TABLE II, LINE 1, DELETE THE FOLLOWING:

'WOOL GRADE 3.3.1 ASTM D 2130 1/

UNDER TABLE II, DELETE '1/' IN ITS ENTIRETY.

PAGE 8, DELETE PARAS. 4.5 AND 4.5.1.

PAGE 11, PARA. 6.7, DELETE ENTIRELY.

CERTIFICATE OF CONFORMANCE IS APPLICABLE FOR

THE GRADING OF WOOL IN TOP FORM.

ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.

ASTM-D-5118 IS AUTHORIZED FOR USE IN LIEU OF MIL-B-17757

(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-C-24910:

INTERIM SPECIFICATION TO MIL-C-24910B:

PAGE 7, PARA. 4.4.2.1, LINE 5, DELETE '15' AND

SUBSTITUTE '10'.

(Ref. T1642)

THREAD, POLYESTER CORE, COTTON OR POLYESTER-COVERED;

DATED JULY 31, 2006

ADDITIONAL INFORMATION FOR A-A-50199A DATED 7/31/2006:

SPECIAL NOTE: INTERIM STANDARD SAMPLE FOR FOR FOLIAGE GREEN 504 IS

MIL-C-44436, ROLL #3729. (THE FOLIAGE GREEN 502 AREA OF THE PATTERN) AND

IS REFERENCED FOR SHADE ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER

NOTICE. FOLIAGE GREEN 504 IS TO BE USED AS SPECIFIED BY CONTRACT. THIS

SHADE HAS BEEN APPROVED FOR TYPE I COLOR STANDARD.

(ref. T1064 - Feb. 27, 2007 SAP 4034641)

SPM1C1-08-Q-0329 11 32

SECTION B

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW

DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: 'THE

SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE

OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE

INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE

VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE'.

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA

4.1.2,LINE 4: DELETE 'B-97' AND SUBSTITUTE 'B-91'.

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING

SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND

1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1-

TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE

DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE

USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN BASIC

OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.

PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING:

'THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER

EDGE OF THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES WITHIN THE CLAMP AND

1' OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF

THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE.'

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5,

PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS AND

BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE SPECIMENS

AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A

PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS

TEMPERATURE RANGE CORRESPONDS TO A SETTING OF 'HIGH' ON THE TEMPERATURE

INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR

UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER.'

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS

AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: 'THE

SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED

IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS

TEMPERATURE RANGE CORRESPONDS TO A SETTING OF 'HIGH' ON THE TEMPERATURE

INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40 MINUTES OR UNTIL

SAMPLES ARE DRY.'

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1,

PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD 'PER SAMPLEUNIT'. PAGE 1,

PARA. 4: DELETE 'APPARATUS' AND SUBSTITUTE 'APPARATUS'. PAGE 1, PARA.

5.1, LINE 3: AFTER 'AT' DELETE'APPROXIMATELY'.

SPM1C1-08-Q-0329 12 32

SECTION B

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF' ADD '+-'. LINE 6: AFTER

'TO' ADD '+-'.

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING:'5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING

IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR

FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL

ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS

YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD

OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000

VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE

VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON

THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE

AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY.'

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH 'IF THE SPECIMEN

DID' IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: 'RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND

DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED.'

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE:

'REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS.'

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: 'THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL

BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE

OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH

VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,

THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN

BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE

AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH

THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC

ISACCEPTABLE OR NON-ACCEPTABLE.'

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH

'406D'.

AFTER PARA. 7.1, ADD THE FOLLOWING: '7.2 NOTE: IF THE MODEL 406D STATIC

DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR

THE TEST.'

(Ref. T0215 - 05/17/07)

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN CANCELLED AND REPLACED BY

ASTM-D-6193, 4/98 STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE TO FED-STD-751.

(ref. T0216 - May 18, 2006)

ADDITIONAL INFORMATION FOR MIL-I-45208:

SPM1C1-08-Q-0329 13 32

SECTION B

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING:

INTERNATIONAL STANDARDS ISO 9001:2000 OR AMERICAN SOCIETY FOR QUALITY ASQ

2003 VERSION.

HIGHER LEVEL INSPECTION SYSTEM:

THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR BID PROPOSAL FOR

EVALUATION AND APPROVAL BY DSCP'S CONTRACTING OFFICER.

INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT LIMITED TO THE INTERNATIONAL

STANDARDS ISO 9002 OR ASQ 2003 MAY BE UTILIZED IF TAILORED TO THE SPECIFIC

QUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION.

(Ref. T1286 - 9/11/06)

ADDITIONAL INFORMATION FOR MIL-P-15011: NO ADDL. INFORMATION FOLLOWS.

(ref. T1368 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-E-20652:

MIL-E-20652F IS HEREBY CANCELLED. USE NASM20652.

ADDITIONAL INFORMATION FOR MIL-C-29127:

INTERIM SPEC CHANGES TO MIL-C-29127A:

PARA. 3.1 STANDARD SAMPLE. ADD THE FOLLOWING

SENTENCE: 'THE STANDARD SAMPLE FOR BLUE 3362 IS

IDENTIFIED UNDER PIECE NO. 78349, FOR KHAKI

3729 UNDER PIECE NO. 89216 AND FOR WHITE 3053

UNDER PIECE NO. 02092.

PARA. 3.4.1, DELETE PARAGRAPH AND SUBSTITUTE:

'3.4.1 CLASS 1, DYED. UNLESS OTHERWISE SPECIFIED

(SEE 6.2) THE COLOR OF THE DYED CLOTH SHALL

MATCH THE APPLICABLE SHADE STANDARD (SEE 3.1).'.

ADD NEW PARAGRAPH: '4.4.2.5 EXAMINATION FOR

SHADE MATCH AND FINISH, INDIVIDUAL ROLLS.

EACH ROLL IN THE LOT SHALL BE EXAMINED VISUALLY

FOR SHADE MATCH (SEE 3.4.3) AND FINISH (SEE 3.7)

A ROLL SHALL BE UNACCEPTABLE IF IT FAILS TO MEET

THE REQUIREMENTS FOR SHADE MATCH OR FINISH. THE

SAMPLE UNIT SHALL BE A 4 INCH BY 20 INCH (10.2

BY 50.8 CM) SWATCH OF THE CLOTH. A SAMPLE UNIT

SHALL BE DRAWN FROM EACH ROLL IN THE LOT.'

PAGE1, PARA 2.1 LINE 8, DELETE 'MIL-T-43548-

THREAD POLYESTER, COTTON-COVERED MIL-T-43624-

THREAD POLYESTER SPUN'

PAGE 2, AFTER PARA 2.1 INSERT THE FOLLOWING NEW

SPM1C1-08-Q-0329 14 32

SECTION B

PARAGRAPH:

'2.2 NON-GOVERNMENT PUBLICATIONS. THE

FOLLOWING DOCUMENTS FORM A PART OF THIS

DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESS

OTHERWISE SPECIFIED, THE ISSUES OF THE

DOCUMENTS WHICH ARE DOD ADOPTED ARE THOSE LISTED

IN THE ISSUE OF THE DODISS CITED IN THE

SOLICITATION. UNLESS OTHERWISE SPECIFIED, THE

ISSUES OF DOCUMENTS NOT LISTED IN THE DODISS ARE

THE ISSUES OF THE DOCUMENTS CITED IN THE

SOLICITATION (SEE 6.2).

AMERICAN NATIONAL STANDARDS INSTITUTE/AMERICAN

SOCIETY FOR QUALITY (ANSI/ASQ)

ANSI/ASQ Z1.4 SAMPLING PROCEDURES AND TABLES

FOR INSPECTION OF ATTRIBUTES.

(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

AMERICAN NATIONAL STANDARDS INSTITUTE,

11 WEST 42ND STREET, NEW YORK, NY 10036-8002).

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS &

COLORISTS (AATCC)

AATCC-8 -COLORFASTNESS TO CROCKING

AATCC-15 - COLORFASTNESS TO PERSPIRATION

AATCC-16 -COLORFASTNESS TO LIGHT

AATCC-20 - FIBER ANALYSIS: QUANTITATIVE

AATCC-61 -COLORFASTNESS TO LAUNDERY, HOME

. AND COMMERCIAL: ACCELERATED

AATCC-81 -PH OF THE WATER-EXTRACT FROM

. BLEACHED TEXTILES

AATCC-96 -DIMENSIONAL CHANGES IN COMMERCIAL

. LAUNDERING OF WOVEN AND KNITTED

. FABRICS

AATCC-124 -APPEARANCE OF FABRICS AFTER REPEATED

. HOME LAUNDERINGS

AATCC-132 -COLORFASTNESS TO DRY-CLEANING

AATCC-135 -DIMENSIONAL CHANGES IN AUTOMATIC

. HOME LAUNDERINGS OF WOVEN AND KNIT

. FABRICS

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN ASSOCIATION OF TEXTILE CHEMIST AND

COLORISTS, P.O. BOX 12215, TRIANGLE PARK, NC

27709-2215)

AMERICAN SOCIETY FOR TESTING AND MATERIAL (ASTM)

ASTM-D-747 -APPARENT BENDING MODULUS OF

. PLASTICS BY MEANS OF A CANTILEVER

. BEAM

ASTM-D-1424 -TEAR RESISTANCE OF WOVEN FABRICS BY

. FALLING PENDULUM (ELMENDORF)

. APPARATUS

SPM1C1-08-Q-0329 15 32

SECTION B

ASTM-D-3775 -FABRIC COUNT OF WOVEN FABRICS

ASTM-D-3776 -MASS PER UNIT AREA (WEIGHT) OF

. FABRIC

ASTM-D-5034 -BREAKING FORCE, AND ELONGATION

. OF TEXTILE FABRICS

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR TESTING AND MATERIALS,100

BARR HARBOR DRIVE, WEST CONSHOHOCKEN PA.19428-

2959)'

PAGE 2, LINE 7, DELETE 'MIL-STD-105- SAMPLING

PROCEDURES AND TABLES FOR INSPECTION BY

ATTRIBUTES'

PAGE 2,PARA 3.3.2,DELETE IN ITS ENTIRETY.

PAGE 3,PARA 3.4.1.1,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.1.2,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.2.1,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.3,DELETE IN ITS ENTIRETY, AND

SUBSTITUTE 'MATCHING. THE COLOR AND

APPEARANCE OF THE DYED AND FINISHED CLOTH SHALL

MATCH THE STANDARD SAMPLE WHEN VIEWED UNDER

FILTERED TUNGSTEN LAMPS WHICH APPROXIMATE

ARTIFICIAL DAYLIGHT HAVING A CORRELATED COLOR

TEMPERATURE OF 7500K (+OR-200K) WITH

ILLUMINATION OF 100(+ OR - 20) FOOT CANDLES,

AND SHALL BE A GOOD MATCH TO THE STANDARD SAMPLE

UNDER INCANDESCENT LAMPLIGHT AT 2300K(+OR-200K)'

PAGE 3,PARA 3.5, LINE 3, TABLE 1- PHYSICAL

REQUIREMENTS, DELETE IN IT'S ENTIRETY, AND

SUBSTITUTE' TABLE 1- PHYSICAL REQUIREMENTS.

CHARACTERISTIC REQUIREMENTS

YARN PLY SINGLES

WEAVE 2/1 LEFT HAND TWILL

FIBER CONTENT 65+OR-5% POLYESTER

. WITH THE REMAINING

. % COTTON

SULFUR CONTENT NO MORE THAN SLIGHT

COLORFASTNESS TO:

.LAUNDERING (3 CYCLES) NOT LESS THAN GRADE 3

.PERSPIRATION NOT LESS THAN GRADE 3

.LIGHT (40 HRS) NOT LESS THAN GRADE 3

.CROCKING NOT LESS THAN 3

DISCOLORATION TO:

.LAUNDERING (3CYCLES) NOT LESS THAN GRADE 3

.PERSPIRATION NOT LESS THAN GRADE 3

.LIGHT (40 HRS) NOT LESS THAN GRADE 3

.WET-DRY CLEANING NOT LESS THAN GRADE 3

.COMBINED LAUNDERING

.AND BLEACHING NOT LESS THAN GRADE 3

.WEIGHT,OZ/SQUARE YD. 7.5 TO.8.2

SPM1C1-08-Q-0329 16 32

SECTION B

YARNS PER INCH,MIN.

. WARP 85

. FILLING 48

.BREAKING STRENGTH,LBS (MIN.)

. WARP 190

. FILLING 110

STIFFNESS, IN-LBS (MAX)

. WARP .002

. FILLING .002

TEAR STRENGTH,LBS (MIN)

. WARP 7.0

. FILLING 5.0

NON-FIBROUS MATERIAL,% MAX. 6.0

DIMENSIONAL STABILITY,

. WARP AND FILLING

. AFTER 5 CYCLES,% MAX. 2.5

SOIL RELEASE NOT LESS THAN 3.0

DURABLE PRESS AFTER 5 CYCLES

. NOT LESS THAN DP 3.0

PH 5 - 8.5

ALL OF THE ABOVE REQUIREMENTS ARE UNDER

VERIFICATION PARAGRAPH 4.5'.

PAGE 4,PARA 3.5.2,DELETE IN ITS ENTIRETY.

PAGE 4,3.6,DELETE IN IT'S ENTIRETY, AND

SUBSTITUTE '3.6 FINISH. THE CLOTH SHALL BE

DESIZED, SCOURED, BLEACHED (FOR CLASS 2 ONLY),

THE WHITE 3053 SHALL BE OBTAINED WITH A

CHEMICAL BLEACH. WHEN FLUORESCENT OPTICAL

BRIGHTENERS ARE USED, THEY SHALL FLUORESCE TO

THE BLUE REGION. THE CLOTH SHALL BE TREATED

WITH A PRECURED DURABLE PRESS RESIN AND A

SOIL RELEASE TREATMENT TO OBTAIN A HAND EQUAL

IN CHARACTERISTICS TO THAT OF THE STANDARD

SAMPLE. THE RESIN FINISH SHALL BE A NON-

CHLORINE RETENTIVE TYPE.'

PAGE 4,PARA 3.7,DELETE IN IT'S ENTIRETY.

PAGE 4,PARA 3.8,DELETE IN ITS ENTIRETY.

PAGE 4,PARA 3.9 DELETE IN ITS ENTIRETY.

PAGE 4,PARA 3.10,DELETE IN ITS ENTIRETY.

PAGE 5,PARA 4.4,LINE 2,DELETE 'MIL-STD-105'

. AND INSERT 'ANSI/ASQ Z1.4'

PAGE 5,PARA 4.1.1, DELETE IN IT'S ENTIRETY.

PAGE 7,TABLE 11-TEST METHOD, DELETE IN ITS

ENTIRETY AND SUBSTITUTE:

. 'TABLE 11 - TEST METHOD

CHARACTERISTIC 1/ REQ. PARA.

YARN PLY 3.5

. TEST METHOD VISUAL

WEAVE 3.5

. TEST METHOD VISUAL 2/

SPM1C1-08-Q-0329 17 32

SECTION B

FIBER CONTENT 3.5

. TEST METHOD ATCC 20A

SULFUR CONTENT 3.5

. TEST METHOD FED-STD-191A

COLORFASTNESS TO:

.LAUNDERING (3 CYCLES) 3.5

. TEST METHOD AATCC 61 TEST 3A 3/ 4/

.PERSPIRATION 3.5

. TEST METHOD AATCC 15 4/

.LIGHT (40 HRS) 3.5

. TEST METHOD AATCC 16 OPT A

.CROCKING 3.5

. TEST METHOD AATCC 8

DISCOLORATION TO:

.LAUNDERING (3 CYCLES) 3.5

TEST METHOD AATCC 61 TEST 3A 3/ 4/

PERSPIRATION 3.5

.LIGHT 3.5

. TEST METHOD AATCC 16 OPT A

.WET-DRY CLEANING 3.5

. TEST METHOD AATCC 132

COMBINED LAUNDERING AND BLEACHING 3.5

. TEST METHOD AATCC-61 TEST 4A 4/

WEIGHT,OZ/SQ.YD 3.5

. TEST METHOD ASTM D3776 OPT C

YARNS PER INCH,MIN. 3.5

. TEST METHOD ASTM D3775

BREAKING STRENGTH, 3.5

. TEST METHOD ASTM D5034

STIFFNESS, 3.5

. TEST METHOD ASTM D747

TEAR STRENGTH, 3.5

. TEST METHOD D1424

NON-FIBROUS MATERIAL,% MAX. 3.5

. TEST METHOD AATCC 20A

DIMENSIONAL STABILITY, WARP & FILL 3.5

. TEST METHOD AATCC 135 (3)VAIII

AFTER 5 CYCLES,% MAX.

SOIL RELEASE 3.5 TEST METHOD 4.5.1.2

DURABLE PRESS AFTER 5 CYCLES 3.5

. TEST METHOD AATCC 124 (3)VAIII

PH 3.5 TEST METHOD AATCC-81

FOOTNOTES:

1/ TESTING SHALL BE PERFORMED UNDER STANDARD

ATMOSPHERIC CONDITIONS FOR TEXTILES AS

SPECIFIED IN ASTM D1776 (TEMPERATURE OF 70

DEGREES F +OR- 2 DEGREES F AND A RELATIVE

HUMIDITY OF 65 PERCENT +OR-2 PERCENT).

2/ ONE DETERMINATION SHALL BE MADE FROM EACH

SAMPLE UNIT AND THE RESULT SHALL BE REPORTED AS

'PASS' OR 'FAIL'.

SPM1C1-08-Q-0329 18 32

SECTION B

3/ THE SPECIMEN MUST BE DRIED AFTER EACH OF THE

3 LAUNDERING CYCLES.

4/ ONLY THE STAINING ON THE COTTON AND

POLYESTER STRIPES OF THE COLOR TRANSFER CLOTH

SHALL BE EVALUATED.'

PAGE 8, PARA 4.5.1.1,AFTER 4.5.1.1 INSERT THE

FOLLOWING NEW PARAGRAPHS:

'4.5.1.2 SOIL RELEASE TEST PROCEDURE. THE TEST

SHALL BE IN ACCORDANCE WITH THE REQUIREMENTS

BELOW.

4.5.1.2.1 SPECIMENS. THERE SHALL BE THREE (3)

4X8 INCH SPECIMENS TAKEN FROM DIFFERENT WARP

AND FILLING YARNS.

4.5.1.2.2 STAINING. THE TEST SPECIMENS SHALL

BE STAINED IN ACCORDANCE WITH AATCC TM 130,

EXCEPT FOR THE FOLLOWING: THREE DROPS OF

GRAPHITE MULTI-GRADE MOTOR OIL (SAE 10W-40),

SUPPLIED AS GFM (SEE 6.4.1),SHALL BE USED IN

LIEU OF FIVE DROPS OF MINERAL OIL.

4.5.1.2.3 LAUNDERING. THE TEST SPECIMENS

SHALL BE LAUNDERED IN ACCORDANCE WITH AATCC

TM 61,TEST NO.111A,EXCEPT FOR THE FOLLOWING:

(1) THE TOTAL LIQUOR VOLUME SHALL BE 500 ML.

(2) FIFTEEN GRAMS PER LITER OF AATCC (124

WOB) DETERGENT SHALL BE USED. (3) A TOTAL OF

50 STAINLESS STEEL BALLS SHALL BE USED. (4)

NO MULTI-FIBER TEST FABRIC OR BLEACHED COTTON

FABRIC IS REQUIRED. (5) AT THE END OF THE CYCLE,

RINSE IN RUNNING WATER AT 105 DEGREES F, FOR

FIVE MINUTES. NO SCOURING IS REQUIRED. (6)

HYDROEXTRACT THE TEST SPECIMEN TO REMOVE EXCESS

MOISTURE. AIR DRY OR OVEN DRY AT 220 DEGREES F.

4.5.1.2.4 EVALUATION. THE TEST SPECIMEN SHALL

BE EVALUATED IN ACCORDANCE WITH AATCC TM 130

PROCEDURE, EXCEPT IT SHALL BE EVALUATED

AGAINST 'NCTRF STAIN RELEASE REPLICA',

SUPPLIED AS GFM (SEE 6.4.2). THE TREATED

SPECIMENS SHALL HAVE AN AVERAGE SOIL RELEASE

RATING OF NOT LESS THAN 3.0 WHEN TESTED AS

SPECIFIED.'

PAGE 8, PARA 4.5.1,DELETE IN IT'S ENTIRETY.

PAGE 8, PARA 4.5.1.1. DELETE IN IT'S ENTIRETY.

PAGE 9,FOLLOWING 6.4 INSERT THE FOLLOWING NEW

PARAGRAPH:

SPM1C1-08-Q-0329 19 32

SECTION B

'6.4.1 GOVERNMENT FURNISHED MATERIAL(GFM) THE

GRAPHIC MULTI-GRADE MOTOR OIL,AND THE NCTRF

STAIN RELEASE REPLICA ARE AVAILABLE AFTER

AWARD OF CONTRACT FROM THE PROCURING OFFICE

ISSUING THE INVITATION FOR THE BIDS.

PAGE 9,FOLLOWING 6.4.1,DELETE 'CUSTODIAN :

NAVY -SA',AND INSERT 'CUSTODIAN :

NAVY- NU'

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE - DATED 19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE

DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF

DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING

CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE

LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS 'PACKING LIST

HERE' SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

(Ref. T0303 - May, 2006)

ADDITIONAL INFORMATION: MIL-STD-147D IS HEREBY CANCELLED AND REPLACED BY

MIL-HDBK-774, 'PALLETIZED UNIT LOADS', DATED 30 AUGUST 2004

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.

(See T0035 for MIL-HDBK-774A) (Ref. T0306 - 03/28/2007, paa2775)

ADDITIONAL INFORMATION FOR MIL-STD-902:

INTERIM SPECIFICATION CHANGE TO MIL-STD-902:

UNDER DEFECT XII 'COMBINATION LABEL (TAG)'

ADD THE FOLLOWING DEFECT:

'F. LABEL STITCHING RUNNING THROUGH THE PRINT-2'

PAGE 7, TABLE II, I, D, BRAID OR PIPING ON

CURTAIN OR APRON: AFTER NO. 6 ADD THE FOLLOWING:

'TAPE OF BRAID OR FLAT SECTION OF PIPING

VISIBLE 1/16 INCH OR MORE FOR A DISTANCE OF MORE

THAN 1 INCH'

PAGE 9:

DEFECT VII F.2.: DELETE 'ON EDGE, TOP, OR RAISED

STITCHING'

SPM1C1-08-Q-0329 20 32

SECTION B

PAGE 10:

DEFECT VII F.3., AFTER THE WORD 'TENSION':

INSERT 'RESULTING IN A TIGHT SEAM'

MIL-STD-902A, PAGE 5 & 6, TABLE I, DELETE IN ITS

ENTIRETY AND SUBSTITUTE 'TABLE I SAMPLING FOR

END ITEM VISUAL EXAMINATION'

NORMAL INSPECTION

LOT SZ SAMP SZ MAX ACCP PT VALU

. 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS

UP THRU 50 20 2 6

51-150 32 3 9 151-280 50 5 13 281-500 80 9 20 501-1200 125 12 27 1201-3200 200 17 40 3201-10,000 315 24 58 10,000-35,000 500 37 84

35,001 & OVER 800 52 122

TIGHTENED INSPECTION

LOT SZ SAMP SZ MAX ACCP PT VALU

. 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS

UP THRU 50 20 0 3

51-150 32 2 7 151-280 50 3 10 281-500 80 6 16 501-1200 125 9 24 1201-3200 200 14 36 3201-10,000 315 21 54 10,001-35,000 500 31 82

35,001 & OVER 800 47 122

REDUCED INSPECTION

LOT SZ SAMP SZ MAX ACCP PT VALU

. 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS

UP THRU 280 20 2-7 6

281-500 32 5-9 9 501-1200 50 6-11 13 1201-3200 80 9-14 15 3201-10,000 125 12-17 28 10,001-35000 200 17-34 40

35,001 & OVER 315 24-30 58

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND

VALUE HAS NOT BEEN EXCEEDED ACCEPT THE LOT BUT

REINSTATE NORMAL INSPECTION (SEE 6.3.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT

SPM1C1-08-Q-0329 21 32

SECTION B

VALUE.

(Ref. T0354)

CLIN PR PRLI U/I QUANTITY UNIT PRICE TOTAL PRICE

0001 0001 EA 2660 $ $

NSN UPC SIZE PGC

8410013127740 N/A N/A N/A

DELIVER FOB: See Clause

QTY VARIANCE: PLUS 2% MINUS 2%

INSP/ACCEP POINT: See Clause

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 0: PRESV MAT = 00:

WRAP MAT = 00: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0:

UNIT CONT = X

INTRMDTE CONT =

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - 00 No special marking

For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is

SPM1C1-08-Q-0329 22 32

SECTION B

not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence.

PARCEL POST ADDRESS:

SD0119

PECKHAM VOCATIONAL INDUSTRIES INC

4110 N GRAND RIVER AVE

LANSING MI 48906

US

FREIGHT SHIPPING ADDRESS

SD0119

PECKHAM VOCATIONAL INDUSTRIES INC

4110 N GRAND RIVER AVE

LANSING MI 48906

US

SPM1C1-08-Q-0329 23 32

A00E01 CAUTION NOTICE - C&T ELECTRONIC INVOICING

(OCT 2007) DSCP

The Directorate of Clothing and Textiles (C&T) requires electronic invoicing on all contracts unless another method is mutually agreed to by the Contractor, the Contracting Officer, the contract administration office, and the payment office.

UTILIZATION OF WIDE AREA WORKFLOW - RECEIPTS AND ACCEPTANCE

(WAWF-RA) IN CONJUNCTION WITH DFARS 252.232-7003, Electronic Submission of Payment Requests.

The Directorate of Clothing and Textiles utilizes VIM-ASAP, which is short for DLA Virtual Item Manager ARN Supply-Chain Automated Processing, to transmit data to WAWF-RA. VIM-ASAP is the only authorized method to electronically process requests for payment to WAWF-RA for the Directorate of Clothing and Textiles. VIM-ASAP will give you visibility of contract information, track production status and print labels. VIM-ASAP pre-populates contract data on your invoices, such as unit price, contract numbers, item numbers, addresses, and many other fields that will save you labor and time.

Advanced Shipment Notifications (ASNs) associated with DFARS clause 252.211-7006, Radio Frequency Identification are sent via VIM-ASAP to WAWF-RA processes.

Please contact the VIM-ASAP help desk at 888-940-7348 to get started today!

For questions about invoice preparation, just call the DFAS Customer Service Resource Center at 1-800-756-4571, or

Check out these resources:

http://www.dfas.mil/contractorpay.html ...under the 'Contractor/Vendor Pay' link.

http://www.dfas.mil/ ... information regarding bill paying process and additional points of contact.

A00E03 CAUTION NOTICE - Small Business Set-Aside & FPI

(MAR 2004) DSCP

This solicitation has been issued pursuant to Section 811 of the FY 2002 DoD Authorization Act, specifically, DFARS 208.602(a)(ii). A timely offer from the Federal Prison Industries (FPI) will be considered for award in accordance with the specifications and evaluation factors delineated in this solicitation.

If this solicitation is set-aside for small business participation and is being issued pursuant to DLAD 8.602(a)(iii)(90) and 19.502-1(b)(90) (as contained in PROCLTR 2002-09), see provision 52.219-9001, Set-Asides of Acquisitions of Items Listed in the Schedule of Products Made in Federal Penal and Correctional Institutions, for additional information.

<CAUTION NOTICE>

<********************* ORCA ********************************>

<ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION>

Offerors are reminded to complete all applicable representations and certifications appearing in Section K of this solicitation.

In addition, in accordance with paragraph (b) of FAR provision 52.204-8, Annual Representations and Certifications, all offerors must complete annual representations Electrinically via the Online Representations and Certifications Application (ORCA) website at http:// orca.bpn.

After reviewing the ORCA database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation, unless otherwise noted in FAR provision 52.204-8.

SECTION C

C11E01 52.211-9P03 SPECIFICATIONS (JAN 1992) DSCP

SECTION D

D00E01 LABELING/PACKAGING FOR DRESS CLOTHING ITEMS

(MAR 2004) DSCP

The following list shows items which require labeling on the packaging in accordance with the attached graphics depicting the DSCP logo and a product line name. Although labeling is required on all of these items, it may not be required on all packaging. For example, while skirts are required to be packaged in a poly bag, those bags do not need to be printed with the DSCP logo and product line name. However, poly bags for shirts and sweaters must be printed with the DSCP logo and product name.

SEWN-IN

ITEM POLY BAG LABELS HANG TAG BOX

All-Weather Coats No Yes Yes No

Jackets No Yes Yes No

Overcoats(Peacoats) No Yes Yes No

Sweaters Yes Yes No No

Jumpers No Yes Yes No

Skirts No Yes Yes No

Coveralls No Yes Yes No

Shirts Yes Yes No No

Garrison Caps Yes Yes No No

Berets Yes Yes No No

Trousers, Utility No Yes Joker Tag No

Slacks, Utility No Yes Joker Tag No

The following is a chart that shows the branch of service and the correlating product line name to be used.

SERVICE PRODUCT LINE NAME

Army Garrison Collection

Navy Quarterdeck Collection

Air Force Wings Collection

Marine Corps Valor Collection

Coast Guard Guardian Collection

Common Service (used by 2 or more services) Defender Collection

PMS color numbers are as follows:

DSCP website -- PMS # 287U (Blue)

Product line name (e.g., Garrison Collection) -- PMS # 287U (Blue)

Tag line ('...the perfect fit') -- PMS # 187U (Red)

DSCP logo -- MS # 187U (Red) - 2nd & 4th vertical stripes in shield; PMS # 287U (Blue) - outline of eagle and wings, background of star in shield, DSCP lettering; and White (no PMS # assigned) - 1st, 3rd & 5th vertical stripes in shield, star in shield, eagle's head.

Wording (including 'Made in USA') on reverse of hang tag and poly bag -- PMS # 287U (Blue).

The following are the specifics regarding sewn-in labels, hang tags, and printed poly bags. It is noted that the DSCP logo and product line names are to be recreated from the graphics shown later in this document, so that the logo and the font, font size, and size of the logo are exactly as shown. Further, it is noted that the DSCP website is to be italicized.

POLY BAGS

Dimension -- For shirts and sweaters: White background, 3' H completely surrounding the bag. Position white background approx 1/3 of the way up from bottom of bag.

SPM1C1-08-Q-0329 24 32

For garrison caps: white background, 3' H x approx 6' W (front of bag) and 8' W (reverse of bag), positioned lengthwise on the bag approx 3' (front of bag) and 2' (reverse of bag) from closed end of bag and centered top-to-bottom.

For berets: white background, 3' H x 6' W (front of bag) and 8' W (reverse of bag); centered on the front and approx 2' below the open end of the reverse; positioned with the open end of the bag above the DSCP logo on both the front and reverse sides. Insert the beret so that the combination label is visible through the reverse side of the bag.

Packaging -- For dress shirts only: commercial packaging (including pins, cardboard backing, plastic collar stands, etc.)

Self-Adhesive Label -- For sweaters: size and NSN must be printed in black ink on a self-adhesive label approximately 1 1/2' W x 3/4 H, affixed on the bottom right hand corner of front of poly bag, below the white background with the DSCP logo and product line name. Approx fonts: Size - 14 point; NSN - 10 point. The size shall be indicated by the letters S, M, L, XL, etc, followed by the required numerical size - for example, M (38-40). For garrison caps: replace paper identification label (required to be placed inside the poly bag) with a self-adhesive label of the same approx size and containing the same information. Affix the label on the lower right corner of the front of poly bag, below the white background with the DSCP logo and product line name. For utility slacks and trousers: self-adhesive commercial leg strip with DSCP logo/website and garment size.

SEWN-IN LABELS

Small Label(1) Large Label(2)

Label Dimension 2 3/4' W x 1 5/8' H 3' W x 3' H or 1 1/2' W x 2' H

Label Color White White

Border N/A 4 1/2 point, PMS #287U (Blue), 1/4' from all edges

Notes:

(1) For all items other than those listed in note 2. Use 2 1/4' W x 1 5/8' H for shirts with double yoke; use 1 1/2' W x 2 1/8' H for shirts with without a double yoke.

(2) For All-Weather Coats, Overcoats (Peacoats), and Jackets.

The contract requirement for labels and packaging other than DSCP labeling and packaging remains as specified in the spec or CID except as noted. Stitch the DSCP labels as follows:

for skirts, trousers and slacks, and shirts with a double yoke, stitch on both ends; for Coats, Overcoats, Jackets, and Jumpers, stitch on all four sides.

LABEL PLACEMENT

Item / Placement

SHIRTS -- For shirts with a double yoke: the small size DSCP label shall be centered on the inside of the double yoke below the collar, and must be visible through the poly bag when commercially packaged. The size/NSN label shall be centered and caught in the double yoke seam, beneath the DSCP label. For shirts without a double yoke: the small size DSCP label shall be looped and be centered and caught in the collar seam, on top of, but not attached to, the size/NSN label. The product line name will have to be stacked in order to fit this smaller sized label. The size/NSN label shall be approx 1 1/2' W x 2 3/4' H, printed in the required font size, centered and stitched in collar seam underneath, but not attached to, the DSCP label, so that it extends beyond the bottom of the DSCP label and is completely visible.

ALL-WEATHER COATS -- The large size DSCP label shall be centered and stitched on the left facing, approximately 10'-12' above the bottom edge. If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

OVERCOATS (PEACOATS) -- The large size DSCP label shall be centered and stitched in the coat, approximately 1' from the neck seam. If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

SKIRTS -- The small size DSCP label shall be stitched on the liner, approximately 2' down from the waistband and 1/4' from the edge of the liner; if there is no liner, stitch the label on the outside back ply of the pocketing, slightly above the combination label. Alternatively, the label may be looped and caught in the inside waistband seam.

SWEATERS -- The small size DSCP label shall be looped and be centered and stitched in the collar seam, with the combination label information printed on the reverse. The size and NSN shall be printed on a self-adhesive label, approximately 1 1/2' H x 3/4' W, and shall be placed on the poly bag in the lower right-hand corner of the bag.

JACKETS (including utility jackets) -- The large size DSCP label shall be centered and stitched in both the jacket and the liner (if required), approximately 1' from the neck seam.

If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

JUMPERS -- The small size DSCP label shall be centered and stitched approximately 1' from the neck seam. Stitch the size/combination label just beneath the DSCP label.

TROUSERS and SLACKS (utility trousers and slacks only) -- The small size DSCP label shall be stitched on the waistband (if sufficiently wide) or outside back ply of the pocketing (if applicable).

GARRISON CAPS -- The small size DSCP label shall be stitched on the inside of the cap, on the opposite side from the combination label

BERETS -- The small size DSCP label shall be stitched on the inside of the beret, slightly above the combination label.

PLEASE NOTE THAT SEWN-IN LABELS (LARGE AND SMALL) ARE TO BE

WOVEN LABELS; PRINTED LABELS ARE NOT PERMITTED FOR THE DSCP

LABELS.

NOTE FOR SHIRTS: WHEN SHIPMENTS ARE REQUIRED TO A MILITARY

CLOTHING SALES STORE, SHIRTS SHALL BE IN A PRINTED POLY BAG

AND PACKAGED COMMERCIALLY (i.e., WITH PINS, CARDBOARD SHIRT

BOARD, AND PLASTIC COLLAR STAND). WHEN SHIPMENTS ARE REQUIRED

TO A RECRUIT CENTER, SHIRTS SHALL HAVE NO COMMERCIAL

PACKAGING, AND SHALL BE PACKAGED ONLY IN A PRINTED POLY BAG.

SMALL SIZE DSCP SEWN-IN LABELS ARE REQUIRED FOR ALL SHIRTS,

REGARDLESS OF SHIPPING DESTINATION.

HANG TAGS(1)

Tag Dimension -- 4' H x 3' W

Tag Color -- White

Tag Spec -- 8 point weight, coated on both sides

Border -- 4 1/2 point, PMS # 287U (Blue), front and reverse, 1/4' from all edges

Note: (1)Right justify all printing on reverse side of hang tag.

HANG TAG PLACEMENT

Skirts, Slacks and Trousers -- Attach hang tag at or slightly below waistband.

Coats, Jackets, Jumpers, and Coveralls -- Attach near bottom of left sleeve.

JOKER TAGS(1)

SPM1C1-08-Q-0329 25 32

Tag Dimension -- Approx 2' H x 3' W

Tag Color -- White

Tag Spec -- 8 point weight, coated front side DetailsTag will show DSCP logo, size, and retail UPC code.

Note: (1)

D00E02 POLY BAG MARKING (MAR 2004) DSCP

POLY BAG (REVERSE)

FOR ALL SERVICES:

MADE IN U.S.A.

DSCP Logo placed here] To place an order via our electronic catalog or for more information about us, visit our website at http://www.dscp.dla.mil. We now accept the IMPAC card for your ordering convenience. We are the Defense Supply Center Philadelphia (DSCP), your premier supplier of military clothing.

D11C02 52.211-9010 SHIPPING LABEL REQUIREMENTS -

MIL-STD-129P (MAY 2006) DLAD

D11C03 52.211-9010 SHIPPING LABEL REQUIREMENTS -

MIL-STD-129P (MAY 2006) ALT I (AUG 2005)

D11E01 52.211-9P09 PACKAGING, PACKING AND MARKING

(JAN 1992) DSCP

D11E02 52.211-9P10 MARKING OF SHIPMENTS (JAN 1992)

DSCP

D47C01 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD

PACKAGING MATERIAL (WPM) (FEB 2007) DLAD

(a) THIS CLAUSE ONLY APPLIES WHEN WOOD PACKAGING MATERIAL

(WPM) WILL BE USED TO MAKE SHIPMENTS UNDER THIS CONTRACT

AND/OR WHEN WPM IS BEING ACQUIRED UNDER THIS CONTRACT.

(b) Definition.

Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD).

(c) All Wood Packaging Material (WPM) used to make shipments under DOD contracts…