0328.pdf

PAGE OF PAGES

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDEREQUEST FOR QUOTATIONS

2. DATE ISSUED1. REQUEST NO. 3. REQUISITION/PURCHASE REQUEST NO. RATING4. CERT. FOR NAT. DEF.

UNDER BDSA REG.2

6. DELIVER BY (Date)5. ISSUED BY

7. DELIVERY

OTHER

FOB DESTINATION (See Schedule)

9. DESTINATION

a. NAME OF CONSIGNEE

8. TO: See Schedule

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

11. SCHEDULE (Include applicable Federal, State and local taxes)

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: .

b. Prices quoted are:

Contained in Commercial Catalog or Published Price List No. dated page .

Contained in Internal Price List No. dated , which may be examined at our facility.

Commercial sales of comparable quantities: Quantity ; Price ;

Customer Other (provide basis)

c. FOB Point: Destination

Origin Shipping Point (City, State)

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: .

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: Vendor Toll-Free Number:

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE12. DISCOUNT FOR PROMPT PAYMENT

NOTE: Additional provisions and representations are not attached.are

15. DATE OF QUOTATION14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER CAGE

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or print) b. TELEPHONE

AREA CODEc. COUNTY

NUMBERd. CITY e. STATE f. ZIP CODE c. TITLE (Type of Print)

PerFORM (DLA)AUTHORIZED FOR LOCAL REPRODUCTION Previous edition not usable.

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AND/OR DMS REG. 1

Vendor E-mail:

X 1 48

SPM1C1-08-Q-0328 2008 JUN 27

DEFENSE SUPPLY CENTER PHILADELPHIA

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

Tyrone Jamison, PCPQCCF PHONE: (215) 737-0890 E-mail: Tyrone.Jamison@dla.mil

Deliver within 120 days ADO

X

2008 JUL 14

X

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET

SPM1C1-08-Q-0328 2 48

**** In pricing your offer please refer to the delivery schedule, nsn's upcs, shipping destinations and square inch table on pages 2 and 3. Enter your offer in space provided on page 36. ****

Please see attachment for packaging/labeling information.

Cap, Garrison, Man's, Navy Poly Cotton, Khaki Type II, Class 5 Mil-C-17614 Pattern Date: 30 Dec 2005

PGC 00157

NSN Size total 120days 150days 180days 210days 8405002974023 6 1/2 600 150 150 150 150 8405002974025 6 5/8 375 75 75 75 150 8405002974030 6 3/4 450 150 150 75 75 8405002974038 6 7/8 600 150 150 150 150 8405002974040 7 1950 450 450 525 525 8405002974055 7 1/8 975 225 225 300 225 8405002974056 7 1/4 1950 525 525 450 450 8405002974067 7 3/8 1125 225 300 300 300 8405002974069 7 1/2 1500 450 375 375 300 8405002974070 7 5/8 525 150 150 75 150 8405002974071 7 3/4 750 150 150 225 225 10800 Destinations:

VSTN SD0119

Peckham Vocational Industries INC.

4110 N Grand River Lansing, MI 48906

UPC Codes:

PGC: 00157

PGC UPC NSN Nomen Size 00157 718020-282374 8405002974023 Cap, Garrison 6 1/2 00157 718020-282381 8405002974025 Cap, Garrison 6 5/8 00157 718020-282398 8405002974030 Cap, Garrison 6 3/4 00157 718020-282404 8405002974038 Cap, Garrison 6 7/8 00157 718020-282411 8405002974040 Cap, Garrison 7 00157 718020-282428 8405002974055 Cap, Garrison 7 1/8 00157 718020-282435 8405002974056 Cap, Garrison 7 1/4 00157 718020-282442 8405002974067 Cap, Garrison 7 3/8 00157 718020-282459 8405002974069 Cap, Garrison 7 1/2 00157 718020-282466 8405002974070 Cap, Garrison 7 5/8 00157 718020-282473 8405002974071 Cap, Garrison 7 3/4

[*] Below is the table of square inches by size for the item procured and

CONTINUED ON NEXT PAGE

SPM1C1-08-Q-0328 3 48

is hereby incorporated and made a part of this solicitation and resultant contract (s). This table shall be used to compute adjustments of basic material usage due to size changes clause 52.245.9P20. Changes in materials will be computed by multiplying the total calculated square inch adjustment for the basic material by the following percentage factors:

Cap, Garrison, Poly Cotton, Khaki Type II, Class 5 Mil-C-17614 Pattern Date: 30 Dec 2005

PGC 00157

Size SQ IN 6 1/2 225 6 5/8 230 6 3/4 235 6 7/8 240 7 245 7 1/8 250 7 1/4 255 7 3/8 260 7 1/2 265 7 5/8 270 7 3/4 275 8 280

SPM1C1-08-Q-0328 4 48

SECTION B

PR:

PGC: 00157

ITEM DESCRIPTION:

PGC 00157

CAP, GARRISON, MAN'S, TYPE II, CLASS 5,

KHAKI 3729, POLY/CTN TWILL (UNLINED)

ADDITIONAL INFORMATION FOR MIL-C-17614:

CAP, GARRISON,MAN'S,TYPE II, CLASS 5, KHAKI 3729

PATTERN DATE: 30 DEC 2005

FOLLOWING INTERIM SPECIFICATION CHANGES:

PAGE 2, GOVERNMENT DOCUMENTS

DELETE 'MIL-B-17757'

DELETE 'V-T-276' REPLACE WITH 'A-A-52094 THREAD, COTTON'.

DELETE 'DDD-L-20' REPLACE WITH 'MIL-L-32075 LABEL; FOR CLOTHING EQUIPAGE

AND TENTAGE (GENERAL USE)'

DELETE 'MIL-T-43548' REPLACE WITH

'A-A-50199 THREAD, POLYESTER CORE: COTTON-, RAYON-, OR POLYESTER-COVERED'.

DELETE 'MIL-C-44121' REPLACE WITH

'A-A-52106 CLOTH, TWILL, POLYESTER'

DELETE 'FED-STD-751' REPLACE WITH

'ASTM-D6193 STITCHES SEAMS, AND STITCHINGS'

DELETE 'MIL-STD-147', REPLACE WITH

'MIL-HDBK-774 PALLETIZED UNIT LOADS'

PAGE 3, PARA. 2.2 DELETE IN ITS ENTIRETY, SUBSTITUTE 'NON-GOVERNMENT

PUBLICATIONS:

AMERICAN SOCIETY FOR TESTING AND MATERIALS'

TEST METHODS AS FOLLOWS:

ASTM-D6193 STITICHES, SEAMS AND STITICHINGS'

(APPLICATION FOR COPIES SHOULD BE

ADDRESSED TO ASTM, INTL, PO BOX 3700, 100 BARR

HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428)

ANSI/ASQC Z1.4-SAMPLING PROCEDURES AND

TABLE FOR INSPECTION BY ATTRIBUTES

(APPLICATION FOR COPIES SHOULD BE ADDRESSED

TO AMERICAN SOCIETY FOR QUALITY CONTROL,

611 E. WISCONSIN AVENUE, P.O. BOX 3005, MILWAUKEE,

WI 53201-3005).'

PAGE 4, PARA. 3.3.1.1 DELETE 'MIL-C-3738'

SUBSTITUTE 'MIL-DTL-3738, CLOTH, ELASTIQUE,

WOOL'

SPM1C1-08-Q-0328 5 48

SECTION B

PAGE 4, PARA. 3.3.1.2, DELETE 'MIL-C-21115'

SUBSTITUTE 'MIL-DTL-21115, CLOTH, TROPICAL:

WOOL, POLYESTER/WOOL'

PAGE 4, PARA. 3.3.1.3, DELETE 'MIL-C-10176' SUBSTITUTE'MIL-DTL-10176,

CLOTH, GABARDINE: WOOL, POLYESTER AND WOOL'

PAGE 4, PARA. 3.3.1.4, DELETE 'MIL-C-823' SUBSTITUTE 'MIL-DTL-823, CLOTH,

SERGE; WOOL AND NYLON, POLYESTER AND WOOL'

PAGE 4, PARA. 3.3.1.6, DELETE 'MIL-C-44121' SUBSTITUTE 'A-A-52106, CLOTH,

TWILL, POLYESTER'

PAGE 7, PARA. 3.7, ADD AT THE END OF THE PARAGRAPH 'MINOR MODIFICATIONS

ARE PERMITTED WHERE NECESSARY WHEN USING AUTOMATIC EQUIPMENT. THESE

MODIFICATIONS SHALL NOT ALTER THE APPEARANCE, SERVICEABILITY, OR

DIMENSIONAL REQUIREMENTS CITED IN THE SPECIFICATION.'

PAGE 10, TABLE I, OPER. 5.A., AFTER 'EDGE ' ADD

'AND BACK SIDE'

PAGE 18, DELETE ALL OF SECTION 5, SUBSTITUTE '5.1 PRESERVATION, PACKAGING

AND MARKING. THE PRESERVATION, PACKAGING AND MARKING SHALL BE AS SPECIFIED

IN THE CONTRACT OR PURCHASE ORDER'.

DELETE CURRENT 'BARCODE LABEL/TAG'

REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG. EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER

TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE

STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A

SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS

SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.

THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT

CODE (UPC)

ASSIGNED FOR ALL NSNS BY THE GOVERNMENT.

THE INITIAL 'UPC' MUST APPEAR BENEATH THE

CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND

SHALL BE

LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED

AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSENO DAMAGE TO

THE ITEM.

PACKAGING SECTION. ADD THE FOLLOWING:

NOTE: UNIVERSAL PRODUCT CODE INFORMATION

THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL

SHIPPING CARTONS ON WHICH THE NSN APPEARS.

NOTICE: BE ADVISED THAT THIS ITEM REFLECTS

REDUCED AQL'S.

SPM1C1-08-Q-0328 6 48

SECTION B

MATERIAL ACCEPTANCE.

(A) ALL SAMPLING ACCEPTANCE NUMBERS ARE REDUCED BY ONE-THIRD WHERE THE

ACCEPTANCE NUMBER IS EQUAL TO OR GREATER THAN THREE(3). FOR EXAMPLE, WHERE

ANSI/ASQC Z1.4 SAMPLING ACCEPTANCE NUMBER IS THREE (3), THE NEW ACCEPTANCE

NUMBER IS TWO (2). FORA POINT SYSTEM IF ACCEPTANCE WAS PREVIOUSLY 150,

THE NEW ACCEPTANCE NUMBER IS 100.

(B) A SAMPLING ACCEPTANCE NUMBER OF TWO (2) IS REDUCED TO ONE (1).

(C) A SAMPLING ACCEPTANCE NUMBER OF ONE (1) REMAINS THE SAME.

APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF DOCUMENTS IS APPLICABLE TO

THIS PROCUREMENT

INTERIM CHANGES TO A-A-52094:

PAGE 1, PARAGRAPH 1.1 CLASSIFICATION. ADD BELOW

'TYPE V' 'TYPE VI - GIMP, HEAVY THREAD'

PAGE 2, TABLE I UNDER COLUMNS 'TICKET NUMBER',

'TEX', 'PLY', 'YARDS PER POUND MINIMUM MAXIMUM',

AND 'BREAKING STRENGTH', LINE 8 DELETE '30',

'60', '3', '7,087', '8,266', AND '3.2'.

PAGE 2, TABLE I, UNDER 'YARDS PER POUND' COLUMN, AFTER 'MAXIMUM', ADD

'2/'.

PAGE 2, TABLE I, BELOW 'TICKET NUMBER 24', ADD THE FOLLLOWING UNDER THE

INDICATED COLUMNS:

TICKET TEX PLY YARDS/LB BREAK STRENGTH

NUMBER APPROX MIN MAX POUNDS (MIN)

'20 90 4 4725 5511 4.5'

PAGE 2, BELOW FOOTNOTE 1/, ADD THE FOLLOWING:

'2/ MAXIMUM YIELD VARIANCE CAN BE INCREASED BY8.0%.'.

PAGE 3, TABLE III, UNDER 'YARDS PER POUND/

MIMIMUM', DELETE '993' AND SUBSTITUTE '940'.

PAGE 3, FOLLOWING 2.1, INSERT THE FOLLOWING

PARAGRAPH: '2.1.1 MILDEW RESISTANT TREATMENT. THE THREAD SHALL HAVE A

MILDEW RESISTANT TREATMENT IN ACCORDANCE WITH MIL-T-3530,PARAGRAPHS 3.4.1,

AND 3.4.1.1, WHEN SPECIFIED IN THE ACQUISITION DOCUMENT.'

THE FOLLOWING LIST IS APPLICABLE FOR CONVERTING THREADS CITED IN V-T-276

TO THREADS CITED IN A-A-52094:

TICKET NO. IN USE TICKET NO.

V-T-276 IN A-A-52094 COMMENT

20 24 - 36 30 - 40/4 40/3 -

60 NO TICKET 60 AVAILABLE

. IN V-T-276

36/3, TYPE IA2 30/3 SPECIFY COLOR 'WHITE'

SPM1C1-08-Q-0328 7 48

SECTION B

40/4, TYPE IA3 40/3 SPECIFY COLOR REQUIRED

60/3, TYPE IA3 NO TICKET 60 AVAILABLE

. IN V-T-276

20/4 (IB2) 16/4 (II) SPECIFY COLOR 'WHITE'

20/4 (IB3) 16/4 (II) SPECIFY COLOR REQUIRED

40/4 (IB3) 40/3 (II) SPECIFY COLOR REQUIRED

40/4 (IB2) 40/3 (II) SPECIFY COLOR 'WHITE'

36/4 (IB2) 30/3 (II) SPECIFY COLOR 'WHITE'

36/4 (IB3) 30/3 (II) SPECIFY COLOR REQUIRED

PAGE 4, PARA. 3.3, END ITEM VISUAL EXAMINATION

LINE 13, DELETE '4.0' AND SUBSTITUTE '2.5'.

PARA. 3.4 END ITEM TESTING, LINE 7,

DELETE '6.5' AND SUBSTITUTE '4.0'.

PAGES 5 AND 6, PARAGRAPH 4.1 PACKAGING.;

PARAGRAPH 4.2 PACKING.; PARAGRAPH 4.3

PALLETIZATION.; PARAGRAPH 4.4 MARKING.; DELETE IN THEIR ENTIRETY AND

SUBSTITUTE:

'4.1 PRESERVATION, PACKING, AND MARKING. THE PRESERVATION, PACKING, AND

MARKING SHALL BE AS SPECIFIED IN THE CONTRACT ORPURCHASE ORDER.'

PAGE 6, PARAGRAPH 5.2 SOURCE OF GOVERNMENT DOCUMENTS. ADD BELOW

'ARE AVAILABLE FROM

DODSSP - CUSTOMER SERVICE'.

PAGE 6, PARAGRAPH 5.3. REPLACEMENT DATA.

LINE 4, UNDER 'V-T-276' DELETE 'AND IA3' AND

SUBSTITUTE 'IA3, II AND IIA'.

LINE 5, UNDER 'V-T-276' DELETE 'AND IB3' AND

SUBSTITUTE 'IB3, IIA, AND IIIB'.

INTERIM STANDARD SAMPLE FOR FOLIAGE GRFEEN 504 IDENTIFIED AS ROLL #3721

(THE FOLIAGE GREEN 502 AREA OF THE PATTERN), ANDREFERENCED FOR SHADE ONLY.

THIS STANDARD IS TEMPORARY UNTIL FURTHER

NOTICE.

NN-P-71C PALLET MATERIALS HANDLING,

. WOOD, STRINGER CONSTRUCTION,

. 2 WAY AND 4 WAY (PARTIAL),

. 9/10/73; NOTICE 1, 12/20/73;

. INT AM 1, 4/30/76; INT AM 2,

. 5/2/77

MIL-DTL-32075 LABEL: FOR CLOTHING, EQUIPAGE, AND TENTAGE, (GENERAL USE);

DATED OCTOBER 17, 2000.

MIL-C-368J CLOTH, SATIN, RAYON AND CLOTH,

. TWILL, RAYON, 5/4/89

(USE OF IMPORTED YARN AUTHORIZED FOR

SPM1C1-08-Q-0328 8 48

SECTION B

CLASS 1 CLOTH)

INTERIM CHANGES TO MIL-C-368J:

PAGE 2, PARA. 1.2, ADD THE FOLLOWING:

'CLASS 4 - TWILL, 3.7 OUNCE, RELAXED FINISH.'.

PAGE 3, PARA. 2.2, ADD THE FOLLOWING:

'AATCC 20 - FIBER ANALYSIS: QUALITATIVE'

PAGE 4, TABLE I, UNDER 'CLASS' COLUMN, DELETE '1' AND SUBSTITUTE '1 AND

4'.

PAGE 8, ADD THE FOLLOWING NEW SUBPARAGRAPH:

'3.8.1 RELAXED FINISH. CLASS 4 CLOTH SHALL HAVE A RELAXED FINISH APPLIED

ON A TENTER FRAME DURING THE FINISHING PROCESS.'.

PAGE 8, TABLE II, UNDER TEST METHOD COLUMN,

LINE 1, DELETE '1600' AND SUBSTITUTE 'AATCC 20'.

PAGE 8, TABLE II, ADD THE FOLLOWING:

'SHRINKAGE (CLASS 4) 3.8, 3.8.1 5580'.

MIL-DTL-823L CLOTH, SERGE, WOOL AND NYLON, POLYESTER AND WOOL 4/13/05

(SEE PGC 93167)

STANDARD SAMPLE FOR AIR FORCE BLUE SHADE 1620 IS AVAILABLE AND IS

IDENTIFIED AS

PIECE NO. 93-02, AND IS REFERENCED FOR

SHADE, FINISH AND COLORFASTNESS.

MIL-C-3738K CLOTH, ELASTIQUE, WOOL 3/31/87

NOTE: REDUCED AQL'S APPLY AS FOLLOWS:

PAGE 6, PARAGRAPH 4.4.3.1, POINT COUNT EXAMINATION 2ND LINE, DELETE '10'

AND

SUBSTITUTE '7'.

SEE INTERIM SPECIFICATION CHANGE PGC 93028

INTERIM CHANGES TO MIL-DTL-3738L

MIL-DTL-10176K CLOTH, GARARDINE: WOOL

. POLYESTER AND WOOL

. 05/20/05

(SEE PGC 93212)

ADDITIONAL INFORMATION APPLICABLE TO

MIL-DTL-10176K, DATED 5/20/05

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE

CLOTH SHALL BE PIECE DYED.

SPONGING:

COLD WATER SPOINGING IS REQUIRED. A PROPER

ALCOHOL WETTING AGENT SHALL BE USED TO INSURE

SPM1C1-08-Q-0328 9 48

SECTION B

SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT

FINISH IS NOT RELEASED. THE WATER REPELLENT

TREATMENT MUST BE APPLIED BEFORE THE SPONGING

OPERATION.

ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.

CODE OF FEDERAL REGULATIONS:

16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES

ACT REGULATIONS.

29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH

STANDARDS.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO U.S

GOVERMENT PRINTING OFFICE, SUPERINTENT OF

DOCUMENTS, MAIL STOP:SSOP,WASHINGTON,DC

20402-9328.)

PRINCIPLES AND METHODS OF TOXICOLOGY,

A.WALLACE HAYES (EDITOR),1989, PP 394-396.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO RAVEN

PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK, NY 10036.)

TOXICITY. THE FINISHED CLOTH SHALL NOT

PRESENT A DERMAL HEALTH HAZARD WHEN USED AS INTENDED.

TOXICITY ASSESSMENT. THE CONTRACTOR MUST

FURNISH INFORMATION WHICH CERTIFIES THAT

THE FINISHED PRODUCT IS COMPOSED OF MATERIALS

WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR

PROVIDE SUFFICIENT TOXICITY DATA TO SHOW

COMPATIBILITY WITH PROLONGED, DIRECT SKIN

CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD

INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION

STUDY IN LABORATORY ANIMALS AND A REPEATED

INSULT HUMAN PATCH TEST(MODIFIED DRAIZE

PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER

THE SUPERVISION OF A QUALIFIED DERMATOLOGIST

USING AT LEAST 100 FREE LIVING INDIVIDUALS.

INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,

NAVY SHADE 3346 ONLY.

APPLICABLE WHEN PROCURING THE FOR CLOTH FOR THE

FOLLOWING ITEMS:

COAT, MANS, BLUE, DRESS MIL-C-29107

COAT, WOMANS, BLUE, DRESS MIL-C 29628

SKIRT, WOMANS, BLUE, DRESS, MIL-S-29631

SLACKS, WOMAN, MIL-S-29630

TROUSERS, MANS, CLASS 12 MIL-T-41828

NOTE: ONLY STAINING ON THE POLYESTER AND WOOL STRIPES OF THE COLOR

SPM1C1-08-Q-0328 10 48

SECTION B

TRANSFER CLOTH SHALL BE EVALUATED.

MIL-P-15011J PALLET, MATERIAL HANDLING,

. WOOD, POST CONSTRUCTION, 4

. WAY ENTRY, 9/16/85

MIL-DTL-21115L CLOTH, TROPICAL, WOOL,

. POLYESTER/WOOL;

. DATED 24 JUNE 2005.

(SEE PGC 93069)

ADDITIONAL INFORMATION APPLICABLE TO

MIL-DTL-21115L DATED 24 JUNE 2005.

CERTIFICATE OF CONFORMANCE IS APPLICABLE FOR

THE GRADE OF WOOL IN THE TOP FORM.

MIL-C-29127A CLOTH, TWILL,

. POLYESTER/COTTON, WITH

. CREASE RESISTANT FINISH,

. 10/2/78

SEE INTERIM SPEC CHANGE PGC 93198

INTERIM SPEC CHANGES TO MIL-C-29127A:

PAGE 2 PARA. 3.1 STANDARD SAMPLE. ADD THE FOLLOWING SENTENCE: 'THE

STANDARD SAMPLE FOR BLUE 3362 IS IDENTIFIED UNDER PIECE NO.78349, FOR

KHAKI

3729 UNDER PIECE NO. 89216 AND FOR WHITE 3053

UNDER PIECE NO. 02092.

PARA. 3.4.1, DELETE PARAGRAPH AND SUBSTITUTE:

'3.4.1 CLASS 1, DYED. UNLESS OTHERWISE SPECIFIED

(SEE 6.2) THE COLOR OF THE DYED CLOTH SHALL

MATCH THE APPLICABLE SHADE STANDARD (SEE 3.1).'.

ADD NEW PARAGRAPH: '4.4.2.5 EXAMINATION FOR

SHADE MATCH AND FINISH, INDIVIDUAL ROLLS.

EACH ROLL IN THE LOT SHALL BE EXAMINED VISUALLY

FOR SHADE MATCH (SEE 3.4.3) AND FINISH (SEE 3.7)

A ROLL SHALL BE UNACCEPTABLE IF IT FAILS TO MEET

THE REQUIREMENTS FOR SHADE MATCH OR FINISH. THE

SAMPLE UNIT SHALL BE A 4 INCH BY 20 INCH (10.2

BY 50.8 CM) SWATCH OF THE CLOTH. A SAMPLE UNIT SHALL BE DRAWN FROM EACH

ROLL IN THE LOT.'

PAGE1, PARA 2.1 LINE 8, DELETE 'MIL-T-43548-

THREAD POLYESTER, COTTON-COVERED MIL-T-43624- THREAD POLYESTER SPUN'

PAGE 2, AFTER PARA 2.1 INSERT THE FOLLING NEW PARAGRAPH:

'2.2 NON-GOVERNMENT PUBLICATIONS. THE

SPM1C1-08-Q-0328 11 48

SECTION B

FOLLOWING DOCUMENTS FORM A PART OF THIS

DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE SPECIFIED, THE

ISSUES OF THE DOCUMENTS WHICH ARE DOD ADOPTEDARE THOSE LISTED IN THE

ISSUE OF THE DODISS CITED IN THE SOLICITATION. UNLESS OTHERWISE

SPECIFIED,THE ISSUES OF DOCUMENTS NOT LISTED IN THE DODISS ARE

THE ISSUES OF THE DOCUMENTS CITED IN THE

SOLICITATION (SEE 6.2).

AMERICAN NATIONAL STANDARDS INSTITUTE/AMERICAN

SOCIETY FOR QUALITY (ANSI/ASQ)

ANSI/ASQ Z1.4 SAMPLING PROCEDURES AND TABLES FOR INSPECTION OF ATTRIBUTES.

(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

AMERICAN NATIONAL STANDARDS INSTITUTE,

11 WEST 42ND STREET,NEW YORK,NY 10036-8002).

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS &

COLORISTS (AATCC)

AATCC-8 -COLORFASTNESS TO CROCKING

AATCC-15 - COLORFASTNESS TO PERSPIRATION

AATCC-16 -COLORFASTNESS TO LIGHT

AATCC-20 - FIBER ANALYSIS:QUANTITATIVE

AATCC-61 -COLORFASTNESS TO LAUNDERY,HOME

. AND COMMERCIAL: ACCELERATED

AATCC-81 -PH OFTHE WATER-EXTRACT FROM

. BLEACHED TEXTILES

AATCC-96 -DIMENSIONAL CHANGES IN COMMERCIAL

. LAUNDERING OF WOVEN AND KNITTED

. FABRICS

AATCC-124 -APPEARANCE OF FABRICS AFTER REPEATED HOME LAUNDERINGS

AATCC-132 -COLORFASTNESS TO DRY-CLEANING

AATCC-135 -DIMENSIONAL CHANGES IN AUTOMATIC

. HOME LAUNDERINGS OF WOVEN AND KNIT

. FABRICS

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN ASSOCIATION OF TEXTILE CHEMIST AND COLORISTS, P.O.BOX 12215,

TRIANGLE PARK, NC

27709-2215)

AMERICAN SOCIETY FOR TESTING AND MATERIAL (ASTM)

ASTM-D-747 -APPARENT BENDING MODULUS OF

. PLASTICS BY MEANS OF A CANTILEVER

. BEAM

ASTM-D-1424 -TEAR RESISTANCE OF WOVEN FABRICS BY

. FALLING PENDULUM (ELMENDORF)

. APPARATUS

ASTM-D-3775 -FABRIC COUNT OF WOVEN FABRICS

ASTM-D-3776 -MASS PER UNIT AREA (WEIGHT) OF

. FABRIC

ASTM-D-5034 -BREAKING FORCE,AND ELONGATION

. OF TEXTILE FABRICS

SPM1C1-08-Q-0328 12 48

SECTION B

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR TESTING AND MATERIALS,100

BARR HARBOR DRIVE,WEST CONSHOHOCKEN PA.19428-

2959)'

PAGE 2, LINE 7, DELETE 'MIL-STD-105 SAMPLING

PROCEDURES AND TABLES FOR INSPECTION BY

ATTRIBUTES'

PAGE 2,PARA 3.3.2,DELETE IN ITS ENTIRETY.

PAGE 3,PARA 3.4.1.1,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.1.2,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.2.1,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.3,DELETE IN ITS ENTIRETY,AND

SUBSTITUTE 'MATCHING. THE COLOR AND

APPEARANCE OF THE DYED AND FINISHED CLOTH SHALL

MATCH THE STANDARD SAMPLE WHEN VIEWED UNDER

FILTERED TUNGSTEN LAMPS WHICH APPROXIMATE

ARTIFICAL DAYLIGHT HAVING A CORRELATED COLOR

TEMPERATURE OF 7500K (+OR-200K) WITH

ILLUMINATION OF 100(+ OR - 20) FOOT CANDLES,

AND SHALL BE A GOOD MATCH TO THE STANDARD SAMPLE

UNDER INCANDESCENT LAMPLIGHT AT 2300K(+OR-200K)'

PAGE 3,PARA 3.5, LINE 3, TABLE 1- PHYSICAL

REQUIREMENTS,DELETE IN IT'S ENTIRETY,AND

SUBSTITUTE' TABLE 1- PHYSICAL REQUIREMENTS.

CHARACTERISTIC REQUIREMENTS

YARN PLY SINGLES

WEAVE 2/1 LEFT HAND TWILL

FIBER CONTENT 65+OR-5% POLYESTER

. WITH THE REMAINING

. % COTTON

SULFUR CONTENT NO MORE THAN SLIGHT

COLORFASTNESS TO:

.LAUNDERING (3 CYCLES) NOT LESS THAN GRADE 3

.PERSPIRATION NOT LESS THAN GRADE 3

.LIGHT (40 HRS) NOT LESS THAN GRADE 3

.CROCKING NOT LESS THAN 3

DISCOLORATION TO:

.LAUNDERING (3CYCLES) NOT LESS THAN GRADE 3

PERSPIRATION NOT LESS THAN GRADE 3

.LIGHT (40 HRS) NOT LESS THAN GRADE 3

.WET-DRY CLEANING NOT LESS THAN GRADE 3

.COMBINED LAUNDERING

.AND BLEACHING NOT LESS THAN GRADE 3

.WEIGHT,OZ/SQUARD YD. 7.5 TO.8.2

YARNS PER INCH,MIN.

. WARP 85

. FILLING 48

.BREAKING STRENGTH,LBS(MIN.)

. WARP 190

. FILLING 110

SPM1C1-08-Q-0328 13 48

SECTION B

STIFFNESS, IN-LBS(MAX)

. WARP .002

. FILLING .002

(CONT. INTERIM SPEC CHANGES TO MIL-C-29127A)

TEAR STRENGTH,LBS(MIN)

. WARP 7.0

. FILLING 5.0

NON-FIBROUS MATERIAL,% MAX. 6.0

DIMENSIONAL STABILITY,

. WARP AND FILLING

. AFTER 5 CYCLES,% MAX. 2.5

SOIL RELEASE NOT LESS THAN 3.0

DURABLE PRESS AFTER 5 CYCLES

. NOT LESS THAN DP 3.0

PH 5 - 8.5

ALL OF THE ABOVE REQUIREMENTS ARE UNDER

VERIFICATION PARAGRAPH 4.5'.

PAGE 4,PARA 3.5.2,DELETE IN ITS ENTIRITY.

PAGE 4,3.6,DELETE IN IT'S ENTIRITY,AND

SUBSTITUTE '3.6 FINISH. THE CLOTH SHALL BE

DESIZED,SCOURED,BLEACHED (FOR CLASS 2 ONLY),

THE WHITE 3053 SHALL BE OBTAINED WITH A

CHEMICAL BLEACH. WHEN FLUORESCENT OPTICAL

BRIGHTNERS ARE USED,THEY SHALL FLUORESCE TO

THE BLUE REGION. THE CLOTH SHALL BE TREATED

WITH A PRECURED DURABLE PRESS RESIN AND A

SOIL RELEASE TREATMENT TO OBTAIN A HAND EQUAL

IN CHARACTERISTICS TO THAT OF THE STANDARD

SAMPLE. THE RESIN FINISH SHALL BE A NON-

CHLORINE RETENTIVE TYPE.'

PAGE 4,PARA 3.7,DELETE IN IT'S ENTIRITY.

PAGE 4,PARA 3.8,DELETE IN ITS ENTIRITY.

PAGE 4,PARA 3.9 DELETE IN ITS ENTIRITY.

PAGE 4,PARA 3.10,DELETE IN ITS ENTIRITY.

PAGE 5,PARA 4.4,LINE 2,DELETE 'MIL-STD-105'

. AND INSERT 'ANSI/ASQ Z1.4'

PAGE 5,PARA 4.1.1, DELETE IN IT'S ENTIRITY.

CONTINUED ON PGC.93517

DEVIATIONS TO MIL-C-29127A

PAGE 7,TABLE 11-TEST METHOD,DELETE IN ITS

ENTIRETY AND SUBSTITUTE:

(CONT. INTERIM SPEC CHANGES TO MIL-C-29127A)

. 'TABLE 11 - TEST METHOD

CHARACTERISTIC 1/ REQ. PARA.

YARN PLY 3.5

. TEST METHOD VISUAL

WEAVE 3.5

. TEST METDOD VISUAL 2/

SPM1C1-08-Q-0328 14 48

SECTION B

FIBER CONTENT 3.5

. TEST METHOD ATCC 20A

SULFUR CONTENT 3.5

. TEST METHOD FED-STD-191A

COLORFASTNESS TO:

.LAUNDERING (3 CYCLES) 3.5

. TEST METHOD AATCC 61 TEST 3A 3/ 4/

.PERSPIRATION 3.5

. TEST METHOD AATCC 15 4/

.LIGHT (40 HRS) 3.5

. TEST METHOD AATCC 16 OPT A

.CROCKING 3.5

. TEST METHOD AATCC 8

DISCOLORATION TO:

.LAUNDERING (3 CYCLES) 3.5

TEST METHOD AATCC 61 TEST 3A 3/ 4/

PERSPIRATION 3.5

.LIGHT 3.5

. TEST METHOD AATCC 16 OPT A

.WET-DRY CLEANING 3.5

. TEST METHOD AATCC 132

COMBINED LAUNDERING AND BLEACHING 3.5

. TEST METHOD AATCC-61 TEST 4A 4/

WEIGHT,OZ/SQ.YD 3.5

. TEST METHOD ASTM D3776 OPT C

YARNS PER INCH,MIN. 3.5

TABLE TEXT

. TEST METHOD ASTM D3775

BREAKING STRENGTH, 3.5

. TEST METHOD ASTM D5034

STIFFNESS, 3.5

. TEST METHOD ASTM D747

TEAR STRENGHT, 3.5

. TEST METHOD D1424

NON-FIBROUS MATERIAL,% MAX. 3.5

. TEST METHOD AATCC 20A

DIMENSIONAL STABILITY,WARP & FILL 3.5

. TEST METHOD AATCC 135 (3)VAIII

AFTER 5 CYCLES,% MAX.

SOIL RELEASE 3.5 TEST METHOD 4.5.1.2

(CONT. INTERIM SPEC CHANGES TO MIL-C-29127A)

DURABLE PRESS AFTER 5 CYCLES 3.5

. TEST METHOD AATCC 124 (3)VAIII

PH 3.5 TEST METHOD AATCC-81

FOOTNOTES:

1/ TESTING SHALL BE PERFORMED UNDER STANDARD

ATMOSPHERIC CONDITIONS FOR TEXTILES AS

SPECIFIED IN ASTM D1776 (TEMPERATURE OF 70

DEGREES F +OR- 2 DEGREES F AND A RELATIVE

HUMIDITY OF 65 PERCENT +OR-2 PERCENT).

2/ ONE DETERMINATION SHALL BE MADE FROM EACH

SPM1C1-08-Q-0328 15 48

SECTION B

SAMPLE UNIT AND THE RESULT SHALL BE REPORTED AS

'PASS' OR 'FAIL'.

3/ THE SPECIMEN MUST BE DRIED AFTER EACH OF THE

3 LAUNDERING CYCLES.

4/ ONLY THE STAINING ON THE COTTON AND

POLYESTER STPIPES OF THE COLOR TRANSFER CLOTH

SHALL BE EVALUATED.'

PAGE 8, PARA 4.5.1.1,AFTER 4.5.1.1 INSERT THE

FOLLOWIN NEW PARAGRAPHS:

'4.5.1.2 SOIL RELEASE TEST PROCEDURE. THE TEST

SHALL BE IN ACCORDANCE WITH THE TEQUIREMENTS

BELOW.

4.5.1.2.1 SPECIMENTS. THERE SHALL BE THREE (3)

4X8 INCH SPECIMENTS TAKEN FROM DIFFERENT WARP

AND FILLING YARNS.

4.5.1.2.2 STAINING. THE TEST SPECIMENS SHALL

BE STAINED IN ACCORDANCE WITH AATCC TM 130,

EXCEPT FOR THE FOLLING: THREE DROPS OF

GRAPHITE MULTI-GRADE MOTOR OIL (SAE 10W-40),

SUPPLIED AS GFM (SEE 6.4.1),SHALL BE USED IN

(CONT. INTERIM SPEC CHANGES TO MIL-C-29127A)

LIEU OF FIVE DROPS OF MINERAL OIL.

4.5.1.2.3 LAUNDERING. THE TEST SPECIMENTS

SHALL BE LAUNDERED IN ACCORDANCE WITH AATCC

TM 61,TEST NO.111A,EXCEPT FOR THE FOLLOWING:

(1) THE TOTAL LIQUOR VOLUME SHALL BE 500 ML.

(2) FIFTEEN GRAMS PER LITER OF AATCC (124

WOB) DETERGENT SHALL BE USED. (3) A TOTAL OF

50 STAINLESS STEEL BALLS SHALL BE USED. (4)

NO MULTI-FIBER TEST FABRIC OR BLEACHED COTTON

FABRIC IS REQUIRED. (5) AT THE END OF THE CYCLE,

RINSE IN RUNNING WATER AT 105 DEGREES F, FOR

FIVE MINUTES. NO SCOURING IS REQUIRED. (6)

HYDROEXTRACT THE TEST SPECIMENT TO REMOVE EXCESS

MOISTURE. AIR DRY OR OVEN DRY AT 220 DEGREES F.

4.5.1.2.4 EVALUATION. THE TEST SPECIMEN SHALL

BE EVALUATED IN ACCORDANCE WITH AATCC TM 130

PROCEDURE,EXCEPT IT SHALL BE EVALUATED

AGAINST 'NCTRF STAIN RELEASE REPLICA',

SUPPLIED AS GFM (SEE 6.4.2). THE TREATED

SPECIMENS SHALL HAVE AN AVERAGE SOIL RELEASE

RATING OF NOT LESS THAN 3.0 WHEN TESTED AS

SPECIFIED.'

PAGE 8, PARA 4.5.1,DELETE IN IT'S ENTIRETY.

SPM1C1-08-Q-0328 16 48

SECTION B

PAGE 8, PARA 4.5.1.1. DELETE IN IT'S ENTIRETY.

PAGE 9,FOLLOWING 6.4 INSERT THE FOLLOWING NEW

PARAGRAPH:

'6.4.1 GOVERNMENT FURNISHED MATERIAL(GFM) THE

GRAPHIC MULTI-GRADE MOTOR OIL,AND THE NCTRF

STAIN RELEASE REPLICA ARE AVAILABLE AFTER

AWARD OF CONTRACT FROM THE PROCURING OFFICE

ISSUING THE INVITATION FOR THE BIDS.

PAGE 9,FOLLOWING 6.4.1,DELETE 'CUSTODIAN :

NAVY -SA',AND INSERT 'CUSTODIAN :

NAVY- NU'

A-A-50199, THREAD, POLYESTER CORE,

COTTON OR POLYESTER-COVERED, 6/30/89

INTERIM CHANGES TO A-A-50199:

SPECIAL NOTE: INTERIM STANDARD SAMPLE FOR

FOR FOLIAGE GREEN 504 IS MIL-C-44436, ROLL

#3729. (THE FOLIAGE GREEN 502 AREA OF THE

PATTERN) AND IS REFRENCED FOR SHADE ONLY.

THIS STANDARD IS TEMPORARY UNTIL FURTHER NOTICE.

FOLIAGE GREEN 504 IS TO BE USED AS SPECIFIED

BY CONTRACT. THIS SHADE HAS BEEN APPROVED

FOR TYPE I COLOR STANDARD.

CHART:

DELETE 'TICKET NUMBER (SIZES)' COLUMN IN

ITS ENTIRETY UNDER 'ELONGATION' COLUMN

UNDER 'ELONGATION' COLUMN LINES 1 TO 5

DELETE '26' AND SUBSTITUTE '30'.

UNDER 'ELONGATION ' COLUMN LINES 6 TO 9

DELETE '26' AND SUBSTITUTE '32'.

PAGE 4, PARAGRAPH 4.1 PACKAGING; PARA 4.2

PARAGRAPH 4.2 PACKING; PARA 4.3 PALLETIZATION

PARA 4.4 MARKING; DELETE IN THEIR ENTIRETY

AND SUBSTITUTE:

'4.1 PRESERVATION, PACKING AND MARKING SHALL BE

AS SPECIFIED IN THE CONTRACT OR PURCHASE

REQUEST.'

PAGE 5, PARA 5.3.1 SOURCE OF NONGOVERNMENT

DOCUMENTS. DELETE IN ITS ENTIRETY.

PAGE 5, PARA 5.3.2 SOURCE OF GOVERNMENT

DOCUMENTS. DELETE IN ITS ENTIRETY AND

SUBSTITUTE:

5.3.1 SOURCE OF GOVERNMENT DOCUMENTS. COPIES

0F MILITARY AND FEDERAL DOCUMENTS ARE AVAILABLE

FROM: DODSSP-CUSTOMER SERVICE

STANDARDZATION DOCUMENTS ORDER DESK

700 ROBBINS AVENUE

(ADDITIONAL INTERIM CHANGES IN 93467)

SPM1C1-08-Q-0328 17 48

SECTION B

INTERIM SPECIFICATION CHANGES TO

A-A-50199:

PAGE 1, PARAGRAPH 1.1 CLASSIFICATION.

CHART:

DELETE 'TICKET NUMBER (SIZES)' COLUMN IN

ITS ENTIRETY.

UNDER 'ELONGATION' COLUMN LINES 1 TO 5 DELETE

'26' AND SUBSTITUTE '30'.

UNDER 'ELONGATION' COLUMN LINES 6 T0 9 DELETE

'26' AND SUBSTITUTE '32'.

PAGE 4, PARAGRAPH 4.1 PACKAGING.; PARAGRAPH 4.2

PACKING.; PARAGRAPH 4.3 PALLETIZATION.;

PARAGRAPH 4.4 MARKING.; DELETE IN THEIR ENTIRETY

AND SUBSTITUTE:

'4.1 PRESERVATION, PACKING, AND MARKING. THE

PRESERVATION, PACKING, AND MARKING SHALL BE AS

SPECIFIED IN THE CONTRACT OR PURCHASE REQUEST.'

PAGE 5, PARAGRAPH 5.3.1 SOURCE OF NONGOVERNMENT

DOCUMENTS. DELETE IN ITS ENTIRETY.

PAGE 5, PARAGRAPH 5.3.2 SOURCE OF GOVERNMENT

DOCUMENTS.DELETE IN ITS ENTIRETY AND

SUBSTITUTE:

5.3.1 SOURCE OF GOVERNMENT DOCUMENTS. COPIES

OF MILITARY AND FEDERAL DOCUMENTS ARE

AVAILABLE FROM:

DODSSP - CUSTOMER SERVICE

STANDARDIZATION DOCUMENTS ORDER DESK

700 ROBBINS AVENUE

BUILDING 4D

PHILADELPHIA, PA 19111-5094'

A-A-52106 CLOTH, TWILL OR PLAIN WEAVE,

. POLYESTER AND POLYESTER BLEND,

. 6/28/91

(SEE PGC 93385)

INTERIM CHANGES TO A-A-52106:

PAGE 1, UNDER ABSTRACT. AFTER 'THE CLASS 3

CLOTH IS INTENDED FOR USE AS LINING MATERIAL

IN DRESS COATS.' ADD 'CLASS 4 CLOTH IS INTENDED

TO BE USED AS A GARMENT LINING. CLASS 5 CLOTH

IS INTENDED FOR USE AS A NECKTIE AND NECKTAB

OUTERSHELL FABRIC.'

PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT

WEIGHT 2.4 OZ; 2/1 RIGHT HAND TWILL USING

100% FILAMENT POLYESTER SINGLE PLY YARNS FOR BOTH CLASS 4 AND CLASS 5.

CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE

TWILL

SPM1C1-08-Q-0328 18 48

SECTION B

PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD

PAGE 1, GENERAL DESCRIPTION. LINE 5 AFTER

'YARNS' ADD 'THE CLASS 4 CLOTH SHALL BE A TWO

UP-ONE DOWN RIGHT HAND TWILL. THE CLASS 5 CLOTH

SHALL BE A FIVE UP-ONE DOWN HERRINGBONE TWILL.

THE YARNS FOR CLASS 4 CLOTH SHALL BE SINGLE PLY

WITH A NOMINAL DENIER OF 70 FOR THE WARP YARNS

AND 150 FOR THE FILLING YARNS.

PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER

CLASS 3' ADD INFORMATION FOR 'CLASSES 4 AND 5'

CHARACTERISTIC CLASS 4 CLASS 5

MATERIAL CONTENT,

PERCENT:

POLYESTER 100% 100%

COTTON 0 0

RAYON 0 0

COLORFASTNESS TO:

PERSPIRATION GOOD GOOD

SUBLIMATION GOOD GOOD

WET DRY-CLEANING GOOD GOOD

CROCKING (MIN.) 3.5 3/ 3.5 3/

(BLACK OR DARK

BLUE COLORS) 1.0 3/ 1.0 3/

LABILE SULFUR CONTENT 4/ 4/

WEIGHT, OZ. /SQ. YD.

(MIN.) 2.4 3.0

YARNS PER INCH (MIN.)

WARP 124 140

FILLING 76 75

BREAKING STRENGTH

POUNDS (MIN.)

WARP 140 160

FILLING 110 130

TEARING STRENGTH

POUNDS (MIN.)

WARP 5.0 14.0

FILLING 3.0 10.5

PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER

'THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN

'THE CLASS 5 CLOTH , USING 100 % FILAMENT

HERRINGBONE TWILL.' INSERT 'THE CLASS 6 CLOTH

POLYESTER SINGLE PLY WITH BLACK 70 DENIER

NOMINAL WARP AND AIR FORCE BLUE 1622 150 DENIER

NOMINAL FILLING YARNS.'

USING 100% FILAMENT POLYESTER SINGLE PLY WITH 70

DENIER NOMINAL IN THE WARP AND 150 DENIER

NOMINAL IN THE FILLING DIRECTION.'

PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS:

TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING

PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE

FOLLOWING NEW PARAGRAPH. '2.4 COLOR. THE COLOR

OF THE FINISHED CLOTH SHALL BE AS SPECIFIED (SEE

5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR

SPM1C1-08-Q-0328 19 48

SECTION B

SHADE. CLASS 5 FABRIC IS MADE FROM DYED WARP

AND DYED FILLING IN TWO DIFFERENT COLORS. CLASS

5 FABRIC SHALL BE AIR FORCE SHADE BLUE 1622

ROLL # 89-2.

MIL-STD-129P DEPARTMENT OF DEFENSE

. STANDARD PRACTICE

. MILITARY MARKING

. FOR SHIPMENT AND STORAGE

. DATED 29 OCT 2004

THE FOLLOWING INTERIM CHANGE APPLIES TO

MIL-STD-129:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING

CONTAINERS OF ITEMS IN THE DEFENSE SUPPLY CENTER

(DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE. '

THE NOMENCLATURE AND MANUFACTURER'S NAME

(WHEN THE NAME IDENTIFIES THE MATERIAL)

SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING

CONTAINERS OF DSCP C&T ITEMS, REGARDLESS OF

MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY

THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN.

NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C&T ITEMS, THE PACKING LIST SHALL BE

PLACED INSIDE THE LAST CONTAINER TO BE

LOADED FOR EACH SHIPMENT. THE WORDS

'PACKING LIST HERE: SHALL BE STENCILED,

NOT HAND LETTERED, ON THE CONTAINER.

LOT NUMBERING IS REQUIRED ON ALL SHIPPING CARTON

MIL-STD-901B PROVISIONS FOR EVALUATING

. QUALITY OF CAPS, GARRISON,

. MEN'S, 4/8/88

INTERIM CHAGES TO MIL-STD-901B

PAGE 9:

DEFECT VII F.2.: DELETE 'ON EDGE, TOP, OR RAISED

STITCHING'

PAGE 10:

DEFECT VII F.3., AFTER THE WORD 'TENSION':

INSERT 'RESULTING IN A TIGHT SEAM'

. (SEE PGC 93310)

TABLE TEXT

MIL-STD-901, PAGE 5, TABLE I, DELETE IN ITS

ENTIRETY AND SUBSTITUTE 'TABLE I' SAMPLING

PROVISIONS FOR END ITEM VISUAL EXAMINATION.

NORMAL INSPECTION

LOT SZ SAMP SZ MAX ACCP MAX ACCP PT VALU

. NO. FOR

SPM1C1-08-Q-0328 20 48

SECTION B

. SELECTED 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS DEFECTS

. (SEE1.2)

UP THRU 90 20 2 6

91-150 32 3 9 151-280 50 5 13 281-500 80 9 20 501-1200 125 12 27 1201-3200 200 18 40 3201-10,000 315 24 58 10,001-35,000 500 37 84

35,001 & OVER 800 52 122

TIGHTEN INSPECTION

UP THRU 150 32 2 7

151-280 50 3 10 281-500 80 5 16 501-1200 125 9 24 1201-3200 200 14 36 3201-10,000 315 21 54 10,001-35,000 500 31 82

35,001 & OVER 800 47 122

REDUCED INSPECTION

UP THRU 280 20 2-7 6

201-500 32 3-9 9 501-1200 50 5-11 13 1201-3200 80 9-14 15 3201-10,000 125 12-17 28 10,001-35,000 200 17-23 40

35,001 & OVER 315 24-30 58

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND

VALUE HAS NOT BEEN EXCCEDED, ACCEPT THE LOT BUT

REINSTATE NORMAL INSPECTION (SEE 5.5.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT

VALUE.

SECTION D

PRES/PACK LEVELS: A/B TO MIL-C-17614

BAR CODING IN ACCORANCE WITH MIL-STD-129

GOVERNMENT ASSIGNED UPC CODE REQUIRED ON ALL SHIPPING CARTONS ON WHICH THE

NSN

APPEARS.

MIL-HDBK-774

PALLETIZED UNIT LOADS

AUGUST 30, 2004

DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS

AND STANDARDS. PART I AND II, JULY 2000 AND

SUPPLEMENT, MARCH 2000

SPM1C1-08-Q-0328 21 48

SECTION B

FOR ALL SHIPMENTS OF PACKAGED MATERIEL TO THE GOVERNMENT,

WHICH INCLUDES EITHER DEPOT (DLA-DIRECT) OR DVD (CUSTOMER- DIRECT)

SHIPMENTS, BOTH DOD LINEAR AND 2-D BAR CODE MARKINGS ARE REQUIRED ON

MILITARY SHIPPING LABELS IN ACCORDANCE WITH MIL-STD-129, REVISION P,

DATED DECEMBER 15, 2002. 2-D BAR CODING SHALL BE IN ACCORDANCE WITH

ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) AND DOD 4500.9-R. MSL

LINEAR (CODE 3 OF 9 OR CODE 39) BAR CODING SHALL BE IN ACCORDANCE

WITH ISO/IEC 16388. MSL LABEL STOCK QUALITY SHALL MEET

MIL-PRF-61002. MSL BAR CODE PRINT QUALITY SHALL MEET ANSI

MH10.8-2000 OR ANSIX3.182-1990 (R2000) FOR APPLICABLE 2-D AND/OR

LINEAR BAR CODES. ALL DVD SHIPMENTS SHALL MEET ADDITIONAL LINEAR

BAR CODING REQUIREMENTS IN DLAD 52.211-9008. WHEN THE

CONTRACT/ORDER OMITS ANY DATA ELEMENT REQUIRED TO BE BAR-CODED, THE

FIELD SHALL BE ZERO-FILLED. THESE REQUIREMENTS DO NOT APPLY TO

DELIVERY ORDERS WHEN THE BASIC CONTRACT HAS NOT BEEN MODIFIED TO

REQUIRE MIL-STD-129P. IF THERE ARE INCONSISTENCIES

BETWEEN THE SCHEDULE AND MIL-STD-129P, THE SCHEDULE TAKES

PRECEDENCE. .

DELETE CURRENT 'BARCODE LABEL/TAG'

REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG. EACH ITEM SHALL BE INDIVIDUALLY

BAR-CODED WITH A PAPER TAG FOR PERSONAL

CLOTHING ITEMS. THE PAPER USED FOR THE TAGS

SHALL BE STANDARD BLEACHED SULFATE HAVING A

BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH

FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT

PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.

SPM1C1-08-Q-0328 22 48

SECTION B

THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE

A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)

ASSIGNED FOR ALL NSNS BY THE GOVERNMENT.

THE INITIAL 'UPC' MUST APPEAR BENEATH THE

CODE. THE BAR CODES FOR NSN AND UPC SHALL BE

A MEDIUM TO HIGH DENSITY AND SHALL BE

LOCATED SO THAT THEY ARE COMPLETELY VISIBLE

ON THE ITEM WHEN IT IS FOLDED AND PACKAGED

AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE

NO DAMAGE TO THE ITEM.

PACKAGING SECTION. ADD THE FOLLOWING:

NOTE: UNIVERSAL PRODUCT CODE INFORMATION

THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE

(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON

WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/

TAGS:

BAR CODE OMITTED OR NOT MINOR A

READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) MINOR A

OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM MINOR A

CAUSES DAMAGE TO THE ITEM MAJOR

APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF

DOCUMENTS IS APPLICABLE TO THIS PROCUREMENT:

ADDITIONAL INFORMATION FOR A-A-52094A:

SIZE 16; TWIST Z; TYPE II; 16.0 OUNCES NOMINAL; GLAZED FINISH

NO ADDITIONAL INFORMATION

(Ref. T1481 - 4/08).

ADDITIONAL INFORMATION FOR NN-P-71:

NO ADDITIONAL INFORMATION FOLLOWS..

MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE

REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

ADDITIONAL INFORMATION FOR MIL-C-368:

SPM1C1-08-Q-0328 23 48

SECTION B

(USE OF IMPORTED YARN AUTHORIZED FOR

CLASS 1 CLOTH)

INTERIM CHANGES TO MIL-C-368J:

PAGE 2, PARA. 1.2, ADD THE FOLLOWING:

'CLASS 4 - TWILL, 3.7 OUNCE, RELAXED FINISH.'.

PAGE 3, PARA. 2.2, ADD THE FOLLOWING:

'AATCC 20 - FIBER ANALYSIS: QUALITATIVE'

PAGE 4, TABLE I, UNDER 'CLASS' COLUMN, DELETE

'1' AND SUBSTITUTE '1 AND 4'.

PAGE 8, ADD THE FOLLOWING NEW SUBPARAGRAPH:

'3.8.1 RELAXED FINISH. CLASS 4 CLOTH SHALL HAVE

A RELAXED FINISH APPLIED ON A TENTER FRAME

DURING THE FINISHING PROCESS.'.

PAGE 8, TABLE II, UNDER TEST METHOD COLUMN,

LINE 1, DELETE '1600' AND SUBSTITUTE 'AATCC 20'.

PAGE 8, TABLE II, ADD THE FOLLOWING:

'SHRINKAGE (CLASS 4) 3.8, 3.8.1 5580'.

ADDITIONAL INFORMATION FOR MIL-DTL-823L:

STANDARD SAMPLE FOR AIR FORDE BLUE SHADE 1620

IS AVAILABLE AND IS IDENTIFIED AS

PIECE NO. 93-02, AND IS REFERENCED FOR

SHADE, FINISH AND COLORFASTNESS.

ADDITIONAL INFORMATION FOR MIL-S-3577:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1426)

ADDITIONAL INFORMATION FOR MIL-C-3738:

WITH THE FOLLOWING INTERIM CHANGES TO MIL-C-3738:

NOTE: REDUCED AQL'S APPLY AS FOLLOWS:

PAGE 2, 2.1.2, DELETE LINES 4 THRU 7 AND

SUBSTITUTE:

'U.S. DEPARTMENT OF AGRICULTURE

METHODS OF TEST FOR GRADES OF WOOL TOP

(APPLICATION FOR TEST COPIES SHOULD BE ADDRESSED

TO THE U.S. DEPARTMENT OF AGRICULTURE, AGRI-

CULTURAL MARKETING SERVICE, WASHINGTON, DC

20402.)'

PAGE 6, AFTER 4.4.2, ADD THE FOLLOWING:

'4.4.2.1, WOOL. THE WOOL SHALL BE EXAMINED FOR

GRADE (SEE 3.3.1) IN THE UNDYED TOP FORM BY

SPM1C1-08-Q-0328 24 48

SECTION B

COMPARISON WITH THE APPLICABLE U.S. STANDARD

(SEE 2.1.2). IN THE EVENT OF A DISPUTE, THE WOOL

GRADE SHALL BE DETERMINED BY THE WIDTH METHOD

(WEDGE). THE SAMPLE UNIT SHALL BE 1 YARD OF TOP,

PRIOR TO DYEING. THE SAMPLE SIZE (NUMBER OF

SAMPLE UNITS) SHALL BE AS LISTED BELOW. THE LOT

SIZE SHALL BE EXPRESSED IN UNITS OF ONE POUND.

THE RESULTS FROM EACH SAMPLE UNIT SHALL BE

REPORTED SEPARATELY. THE LOT SHALL BE UNACCEPT-

ABLE IF A SINGLE SAMPLE UNIT FAILS TO MEET THE

REQUIRED GRADE.

LOT SIZE (POUNDS) SAMPLE SIZE

800 OR LESS 2

801 UP TO AND INCLUDING

22,000 3

22,001 AND OVER 5

PARA. 4.4.3.1 POINT COUNT EXAMINATION, SECOND

LINE, DELETE '10' AND SUBSTITUTE '7'. AT END OF

PARAGRAPH, ADD THE FOLLOWING: 'EXCEPT THAT

BOWED OR SKEWED FILLING YARNS SHALL NOT BE

SCORED.'

PAGE 7, TABLE II, LINE 1, DELETE THE FOLLOWING:

'WOOL GRADE 3.3.1 ASTM D 2130 1/

UNDER TABLE II, DELETE '1/' IN ITS ENTIRETY.

PAGE 8, DELETE PARAS. 4.5 AND 4.5.1.

PAGE 11, PARA. 6.7, DELETE ENTIRELY.

CERTIFICATE OF CONFORMANCE IS APPLICABLE FOR

THE GRADING OF WOOL IN TOP FORM.

ADDITIONAL INFORMATION FOR MIL-DTL-10176:

INTERIM SPECIFICATION CHANGES TO MIL-DTL-10176K:

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE

CLOTH SHALL BE PIECE DYED.

3.7.3, LINE 2: DELETE '5.5' AND SUBSTITUTE '5.0'

ADD THE FOLLOWING PARAGRAPHS:

'3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED

, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE

FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT

AND SHALL CONFORM TO THE REQUIREMENTS

SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN

4.4.4.

3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE

SPM1C1-08-Q-0328 25 48

SECTION B

INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR

SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN

RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER

ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN

4.4.4.'

PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD

EXAMINATION, LINE 3, DELETE '10' AND SUBSTITUTE

'7', LINE 4, DELETE '12' AND SUBSTITUTE '8'

TABLE II, BELOW 'PH': ADD THE FOLLOWING UNDER

THEIR RESPECTIVE COLUMNS:

'WATER REPELLENCY:

SPRAY RATING:

INITIAL--------3.7.3.1---------5526

AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER

ALCOHOL WETTING AGENT SHALL BE USED TO INSURE

SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT

FINISH IS NOT RELEASED.

THE WATER REPELLANT TREATMENT MUST BE

APPLIED BEFORE THE SPONGING OPERATION.

ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.

CODE OF FEDERAL REGULATIONS

16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES

ACT REGULATIONS.

29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH

STANDARDS.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO U.S

GOVERNMENT PRINTING OFFICE, SUPERINTENT OF

DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC

20402-9328.)

PRINCIPLES AND METHODS OF TOXICOLOGY,

A. WALLACE HAYES (EDITOR), 1989, PP 394-396.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO RAVEN

PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK,

NY 10036.)

TOXICITY. THE FINISHED CLOTH SHALL NOT

PRESENT A DERMAL HEALTH HAZARD WHEN USED

AS INTENDED.

TOXICITY ASSESSMENT. THE CONTRACTOR MUST

FURNISH INFORMATION WHICH CERTIFIES THAT

THE FINISHED PRODUCT IS COMPOSED OF MATERIALS

SPM1C1-08-Q-0328 26 48

SECTION B

WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR

PROVIDE SUFFICIENT TOXICITY DATA TO SHOW

COMPATIBILITY WITH PROLONGED, DIRECT SKIN

CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD

INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION

STUDY IN LABORATORY ANIMALS AND A REPEATED

INSULT HUMAN PATCH TEST (MODIFIED DRAIZE

PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER

THE SUPERVISION OF A QUALIFIED DERMATOLOGIST

USING AT LEAST 100 FREE LIVING INDIVIDUALS.

INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,

NAVY SHADE 3346 ONLY.

APPLICABLE WHEN PROCURING CLOTH FOR THE

FOLLOWING ITEMS:

COAT, MANS, BLUE, DRESS, MIL-C-29107

COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628

SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631

SLACKS, WOMAN'S, MIL-S-29630

TROUSERS, MANS, CLASS 12 MIL-T-41828

(REF. T0969)

ADDITIONAL INFORMATION FOR MIL-P-15011: NO ADDL. INFORMATION FOLLOWS.

(ref. T1368 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.

ASTM-D-5118 IS AUTHORIZED FOR USE IN LIEU OF MIL-B-17757

(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-DTL-21115:

CERTIFICATE OF CONFORMANCE IS APPLICABLE FOR

THE GRADE OF WOOL IN THE TOP FORM.

ADDITIONAL INFORMATION FOR MIL-C-29127:

INTERIM SPEC CHANGES TO MIL-C-29127A:

PARA. 3.1 STANDARD SAMPLE. ADD THE FOLLOWING

SENTENCE: 'THE STANDARD SAMPLE FOR BLUE 3362 IS

IDENTIFIED UNDER PIECE NO. 78349, FOR KHAKI

3729 UNDER PIECE NO. 89216 AND FOR WHITE 3053

UNDER PIECE NO. 02092.

PARA. 3.4.1, DELETE PARAGRAPH AND SUBSTITUTE:

'3.4.1 CLASS 1, DYED. UNLESS OTHERWISE SPECIFIED

(SEE 6.2) THE COLOR OF THE DYED CLOTH SHALL

MATCH THE APPLICABLE SHADE STANDARD (SEE 3.1).'.

SPM1C1-08-Q-0328 27 48

SECTION B

ADD NEW PARAGRAPH: '4.4.2.5 EXAMINATION FOR

SHADE MATCH AND FINISH, INDIVIDUAL ROLLS.

EACH ROLL IN THE LOT SHALL BE EXAMINED VISUALLY

FOR SHADE MATCH (SEE 3.4.3) AND FINISH (SEE 3.7)

A ROLL SHALL BE UNACCEPTABLE IF IT FAILS TO MEET

THE REQUIREMENTS FOR SHADE MATCH OR FINISH. THE

SAMPLE UNIT SHALL BE A 4 INCH BY 20 INCH (10.2

BY 50.8 CM) SWATCH OF THE CLOTH. A SAMPLE UNIT

SHALL BE DRAWN FROM EACH ROLL IN THE LOT.'

PAGE1, PARA 2.1 LINE 8, DELETE 'MIL-T-43548-

THREAD POLYESTER, COTTON-COVERED MIL-T-43624-

THREAD POLYESTER SPUN'

PAGE 2, AFTER PARA 2.1 INSERT THE FOLLOWING NEW

PARAGRAPH:

'2.2 NON-GOVERNMENT PUBLICATIONS. THE

FOLLOWING DOCUMENTS FORM A PART OF THIS

DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESS

OTHERWISE SPECIFIED, THE ISSUES OF THE

DOCUMENTS WHICH ARE DOD ADOPTED ARE THOSE LISTED

IN THE ISSUE OF THE DODISS CITED IN THE

SOLICITATION. UNLESS OTHERWISE SPECIFIED, THE

ISSUES OF DOCUMENTS NOT LISTED IN THE DODISS ARE

THE ISSUES OF THE DOCUMENTS CITED IN THE

SOLICITATION (SEE 6.2).

AMERICAN NATIONAL STANDARDS INSTITUTE/AMERICAN

SOCIETY FOR QUALITY (ANSI/ASQ)

ANSI/ASQ Z1.4 SAMPLING PROCEDURES AND TABLES

FOR INSPECTION OF ATTRIBUTES.

(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

AMERICAN NATIONAL STANDARDS INSTITUTE,

11 WEST 42ND STREET, NEW YORK, NY 10036-8002).

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS &

COLORISTS (AATCC)

AATCC-8 -COLORFASTNESS TO CROCKING

AATCC-15 - COLORFASTNESS TO PERSPIRATION

AATCC-16 -COLORFASTNESS TO LIGHT

AATCC-20 - FIBER ANALYSIS: QUANTITATIVE

AATCC-61 -COLORFASTNESS TO LAUNDERY, HOME

. AND COMMERCIAL: ACCELERATED

AATCC-81 -PH OF THE WATER-EXTRACT FROM

. BLEACHED TEXTILES

AATCC-96 -DIMENSIONAL CHANGES IN COMMERCIAL

. LAUNDERING OF WOVEN AND KNITTED

. FABRICS

AATCC-124 -APPEARANCE OF FABRICS AFTER REPEATED

. HOME LAUNDERINGS

AATCC-132 -COLORFASTNESS TO DRY-CLEANING

SPM1C1-08-Q-0328 28 48

SECTION B

AATCC-135 -DIMENSIONAL CHANGES IN AUTOMATIC

. HOME LAUNDERINGS OF WOVEN AND KNIT

. FABRICS

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN ASSOCIATION OF TEXTILE CHEMIST AND

COLORISTS, P.O. BOX 12215, TRIANGLE PARK, NC

27709-2215)

AMERICAN SOCIETY FOR TESTING AND MATERIAL (ASTM)

ASTM-D-747 -APPARENT BENDING MODULUS OF

. PLASTICS BY MEANS OF A CANTILEVER

. BEAM

ASTM-D-1424 -TEAR RESISTANCE OF WOVEN FABRICS BY

. FALLING PENDULUM (ELMENDORF)

. APPARATUS

ASTM-D-3775 -FABRIC COUNT OF WOVEN FABRICS

ASTM-D-3776 -MASS PER UNIT AREA (WEIGHT) OF

. FABRIC

ASTM-D-5034 -BREAKING FORCE, AND ELONGATION

. OF TEXTILE FABRICS

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR TESTING AND MATERIALS,100

BARR HARBOR DRIVE, WEST CONSHOHOCKEN PA.19428-

2959)'

PAGE 2, LINE 7, DELETE 'MIL-STD-105- SAMPLING

PROCEDURES AND TABLES FOR INSPECTION BY

ATTRIBUTES'

PAGE 2,PARA 3.3.2,DELETE IN ITS ENTIRETY.

PAGE 3,PARA 3.4.1.1,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.1.2,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.2.1,DELETE IN ITS ENTIRETY.

PAGE 3, PARA 3.4.3,DELETE IN ITS ENTIRETY, AND

SUBSTITUTE 'MATCHING. THE COLOR AND

APPEARANCE OF THE DYED AND FINISHED CLOTH SHALL

MATCH THE STANDARD SAMPLE WHEN VIEWED UNDER

FILTERED TUNGSTEN LAMPS WHICH APPROXIMATE

ARTIFICIAL DAYLIGHT HAVING A CORRELATED COLOR

TEMPERATURE OF 7500K (+OR-200K) WITH

ILLUMINATION OF 100(+ OR - 20) FOOT CANDLES,

AND SHALL BE A GOOD MATCH TO THE STANDARD SAMPLE

UNDER INCANDESCENT LAMPLIGHT AT 2300K(+OR-200K)'

PAGE 3,PARA 3.5, LINE 3, TABLE 1- PHYSICAL

REQUIREMENTS, DELETE IN IT'S ENTIRETY, AND

SUBSTITUTE' TABLE 1- PHYSICAL REQUIREMENTS.

CHARACTERISTIC REQUIREMENTS

YARN PLY SINGLES

WEAVE 2/1 LEFT HAND TWILL

FIBER CONTENT 65+OR-5% POLYESTER

SPM1C1-08-Q-0328 29 48

SECTION B

. WITH THE REMAINING

. % COTTON

SULFUR CONTENT NO MORE THAN SLIGHT

COLORFASTNESS TO:

.LAUNDERING (3 CYCLES) NOT LESS THAN GRADE 3

.PERSPIRATION NOT LESS THAN GRADE 3

.LIGHT (40 HRS) NOT LESS THAN GRADE 3

.CROCKING NOT LESS THAN 3

DISCOLORATION TO:

.LAUNDERING (3CYCLES) NOT LESS THAN GRADE 3

.PERSPIRATION NOT LESS THAN GRADE 3

.LIGHT (40 HRS) NOT LESS THAN GRADE 3

.WET-DRY CLEANING NOT LESS THAN GRADE 3

.COMBINED LAUNDERING

.AND BLEACHING NOT LESS THAN GRADE 3

.WEIGHT,OZ/SQUARE YD. 7.5 TO.8.2

YARNS PER INCH,MIN.

. WARP 85

. FILLING 48

.BREAKING STRENGTH,LBS (MIN.)

. WARP 190

. FILLING 110

STIFFNESS, IN-LBS (MAX)

. WARP .002

. FILLING .002

TEAR STRENGTH,LBS (MIN)

. WARP 7.0

. FILLING 5.0

NON-FIBROUS MATERIAL,% MAX. 6.0

DIMENSIONAL STABILITY,

. WARP AND FILLING

. AFTER 5 CYCLES,% MAX. 2.5

SOIL RELEASE NOT LESS THAN 3.0

DURABLE PRESS AFTER 5 CYCLES

. NOT LESS THAN DP 3.0

PH 5 - 8.5

ALL OF THE ABOVE REQUIREMENTS ARE UNDER

VERIFICATION PARAGRAPH 4.5'.

PAGE 4,PARA 3.5.2,DELETE IN ITS ENTIRETY.

PAGE 4,3.6,DELETE IN IT'S ENTIRETY, AND

SUBSTITUTE '3.6 FINISH. THE CLOTH SHALL BE

DESIZED, SCOURED, BLEACHED (FOR CLASS 2 ONLY),

THE WHITE 3053 SHALL BE OBTAINED WITH A

CHEMICAL BLEACH. WHEN FLUORESCENT OPTICAL

BRIGHTENERS ARE USED, THEY SHALL FLUORESCE TO

THE BLUE REGION. THE CLOTH SHALL BE TREATED

WITH A PRECURED DURABLE PRESS RESIN AND A

SOIL RELEASE TREATMENT TO OBTAIN A HAND EQUAL

IN CHARACTERISTICS TO THAT OF THE STANDARD

SAMPLE. THE RESIN FINISH SHALL BE A NON-

CHLORINE RETENTIVE TYPE.'

SPM1C1-08-Q-0328 30 48

SECTION B

PAGE 4,PARA 3.7,DELETE IN IT'S ENTIRETY.

PAGE 4,PARA 3.8,DELETE IN ITS ENTIRETY.

PAGE 4,PARA 3.9 DELETE IN ITS ENTIRETY.

PAGE 4,PARA 3.10,DELETE IN ITS ENTIRETY.

PAGE 5,PARA 4.4,LINE 2,DELETE 'MIL-STD-105'

. AND INSERT 'ANSI/ASQ Z1.4'

PAGE 5,PARA 4.1.1, DELETE IN IT'S ENTIRETY.

PAGE 7,TABLE 11-TEST METHOD, DELETE IN ITS

ENTIRETY AND SUBSTITUTE:

. 'TABLE 11 - TEST METHOD

CHARACTERISTIC 1/ REQ. PARA.

YARN PLY 3.5

. TEST METHOD VISUAL

WEAVE 3.5

. TEST METHOD VISUAL 2/

FIBER CONTENT 3.5

. TEST METHOD ATCC 20A

SULFUR CONTENT 3.5

. TEST METHOD FED-STD-191A

COLORFASTNESS TO:

.LAUNDERING (3 CYCLES) 3.5

. TEST METHOD AATCC 61 TEST 3A 3/ 4/

.PERSPIRATION 3.5

. TEST METHOD AATCC 15 4/

.LIGHT (40 HRS) 3.5

. TEST METHOD AATCC 16 OPT A

.CROCKING 3.5

. TEST METHOD AATCC 8

DISCOLORATION TO:

.LAUNDERING (3 CYCLES) 3.5

TEST METHOD AATCC 61 TEST 3A 3/ 4/

PERSPIRATION 3.5

.LIGHT 3.5

. TEST METHOD AATCC 16 OPT A

.WET-DRY CLEANING 3.5

. TEST METHOD AATCC 132

COMBINED LAUNDERING AND BLEACHING 3.5

. TEST METHOD AATCC-61 TEST 4A 4/

WEIGHT,OZ/SQ.YD 3.5

. TEST METHOD ASTM D3776 OPT C

YARNS PER INCH,MIN. 3.5

. TEST METHOD ASTM D3775

BREAKING STRENGTH, 3.5

. TEST METHOD ASTM D5034

STIFFNESS, 3.5

. TEST METHOD ASTM D747

TEAR STRENGTH, 3.5

. TEST METHOD D1424

NON-FIBROUS MATERIAL,% MAX. 3.5

. TEST METHOD AATCC 20A

DIMENSIONAL STABILITY, WARP & FILL 3.5

SPM1C1-08-Q-0328 31 48

SECTION B

. TEST METHOD AATCC 135 (3)VAIII

AFTER 5 CYCLES,% MAX.

SOIL RELEASE 3.5 TEST METHOD 4.5.1.2

DURABLE PRESS AFTER 5 CYCLES 3.5

. TEST METHOD AATCC 124 (3)VAIII

PH 3.5 TEST METHOD AATCC-81

FOOTNOTES:

1/ TESTING SHALL BE PERFORMED UNDER STANDARD

ATMOSPHERIC CONDITIONS FOR TEXTILES AS

SPECIFIED IN ASTM D1776 (TEMPERATURE OF 70

DEGREES F +OR- 2 DEGREES F AND A RELATIVE

HUMIDITY OF 65 PERCENT +OR-2 PERCENT).

2/ ONE DETERMINATION SHALL BE MADE FROM EACH

SAMPLE UNIT AND THE RESULT SHALL BE REPORTED AS

'PASS' OR 'FAIL'.

3/ THE SPECIMEN MUST BE DRIED AFTER EACH OF THE

3 LAUNDERING CYCLES.

4/ ONLY THE STAINING ON THE COTTON AND

POLYESTER STRIPES OF THE COLOR TRANSFER CLOTH

SHALL BE EVALUATED.'

PAGE 8, PARA 4.5.1.1,AFTER 4.5.1.1 INSERT THE

FOLLOWING NEW PARAGRAPHS:

'4.5.1.2 SOIL RELEASE TEST PROCEDURE. THE TEST

SHALL BE IN ACCORDANCE WITH THE REQUIREMENTS

BELOW.

4.5.1.2.1 SPECIMENS. THERE SHALL BE THREE (3)

4X8 INCH SPECIMENS TAKEN FROM DIFFERENT WARP

AND FILLING YARNS.

4.5.1.2.2 STAINING. THE TEST SPECIMENS SHALL

BE STAINED IN ACCORDANCE WITH AATCC TM 130,

EXCEPT FOR THE FOLLOWING: THREE DROPS OF

GRAPHITE MULTI-GRADE MOTOR OIL (SAE 10W-40),

SUPPLIED AS GFM (SEE 6.4.1),SHALL BE USED IN

LIEU OF FIVE DROPS OF MINERAL OIL.

4.5.1.2.3 LAUNDERING. THE TEST SPECIMENS

SHALL BE LAUNDERED IN ACCORDANCE WITH AATCC

TM 61,TEST NO.111A,EXCEPT FOR THE FOLLOWING:

(1) THE TOTAL LIQUOR VOLUME SHALL BE 500 ML.

(2) FIFTEEN GRAMS PER LITER OF AATCC (124

WOB) DETERGENT SHALL BE USED. (3) A TOTAL OF

50 STAINLESS STEEL BALLS SHALL BE USED. (4)

NO MULTI-FIBER TEST FABRIC OR BLEACHED COTTON

FABRIC IS REQUIRED. (5) AT THE END OF THE CYCLE,

RINSE IN RUNNING WATER AT 105 DEGREES F, FOR

FIVE MINUTES. NO SCOURING IS REQUIRED. (6)

SPM1C1-08-Q-0328 32 48

SECTION B

HYDROEXTRACT THE TEST SPECIMEN TO REMOVE EXCESS

MOISTURE. AIR DRY OR OVEN DRY AT 220 DEGREES F.

4.5.1.2.4 EVALUATION. THE TEST SPECIMEN SHALL

BE EVALUATED IN ACCORDANCE WITH AATCC TM 130

PROCEDURE, EXCEPT IT SHALL BE EVALUATED

AGAINST 'NCTRF STAIN RELEASE REPLICA',

SUPPLIED AS GFM (SEE 6.4.2). THE TREATED

SPECIMENS SHALL HAVE AN AVERAGE SOIL RELEASE

RATING OF NOT LESS THAN 3.0 WHEN TESTED AS

SPECIFIED.'

PAGE 8, PARA 4.5.1,DELETE IN IT'S ENTIRETY.

PAGE 8, PARA 4.5.1.1. DELETE IN IT'S ENTIRETY.

P…