RFQ SPM1C1-08-Q-0140.pdf

PAGE OF PAGES

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDEREQUEST FOR QUOTATIONS

2. DATE ISSUED1. REQUEST NO. 3. REQUISITION/PURCHASE REQUEST NO. RATING4. CERT. FOR NAT. DEF.

UNDER BDSA REG.2

6. DELIVER BY (Date)5. ISSUED BY

7. DELIVERY

OTHER

FOB DESTINATION (See Schedule)

9. DESTINATION

a. NAME OF CONSIGNEE

8. TO: See Schedule

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

11. SCHEDULE (Include applicable Federal, State and local taxes)

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: .

b. Prices quoted are:

Contained in Commercial Catalog or Published Price List No. dated page .

Contained in Internal Price List No. dated , which may be examined at our facility.

Commercial sales of comparable quantities: Quantity ; Price ;

Customer Other (provide basis)

c. FOB Point: Destination

Origin Shipping Point (City, State)

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: .

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: Vendor Toll-Free Number:

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE12. DISCOUNT FOR PROMPT PAYMENT

NOTE: Additional provisions and representations are not attached.are

15. DATE OF QUOTATION14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER CAGE

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or print) b. TELEPHONE

AREA CODEc. COUNTY

NUMBERd. CITY e. STATE f. ZIP CODE c. TITLE (Type of Print)

PerFORM (DLA)AUTHORIZED FOR LOCAL REPRODUCTION Previous edition not usable.

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AND/OR DMS REG. 1

Vendor E-mail:

X 1 30

SPM1C1-08-Q-0140 2008 APR 17

DEFENSE SUPPLY CENTER PHILADELPHIA

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

Jennifer Truesdale, PCPQCCE

PHONE: (215) 737-2343 FAX: (215)737-2486

E-mail: Jennifer.Truesdale@dla.mil

Deliver within 120 days ADO

X

2008 MAY 19

X

Solicitation Number: PAGE OF PAGESCONTINUATION SHEET

SPM1C1-08-Q-0140 2 30

***** IN PRICING YOUR OFFER PLEASE REFER TO THE DELIVERY SCHEDULE,

NSN'S,UPCS,SHIPPING DESTINATIONS AND SQUARE INCH TABLE ON PAGES 2 AND 3.

ENTER YOUR OFFER IN SPACE PROVIDED ON PAGE 19.*****

*ONE PRODUCT DEMONSTRATION MODEL SIZE 22 1/2 IS REQUIRED WITH SUBMITTAL OF

SOLICIATION.

*ALTHOUGH THE BERRY AMENDMENT DOES NOT APPLY, THE GOVERNMENT REQUESTS THAT

ALL MANUFACTURING MUST BE DONE IN THE UNITED STATES FROM 100% U.S.

DOMESTIC PRODUCTS.

*PLEASE SEE ATTACHMENT FOR PACKAGING/LABELING INFORMATION AND ADJECTIVE

RATING SYMBOLOGY

Delivery Schedule

CAP, SERVICE, WOMAN'S, MC 2212

PGC 02036

8410-01-279-4473 (S)

NSN SIZE Total Date Date Date 120 days 150 days 180 days

8410-01-279-4474 21 1/2 144 48 48 48 8410-01-279-4475 22 400 128 128 144 8410-01-279-4476 22 1/2 712 176 160 376 8410-01-279-4477 23 216 32 32 152 8410-01-279-4478 23 1/2 136 32 32 72 8410-01-440-5993 24 1/2 16 16

TOTAL 1624 416 400 808

Destination

VSEQ RSTV

LION VALLEN INDUSTRIES RECEIVING SECTION

340 MOORE AVENUE BUILDING 295

BUILDING 8 MCRD

SUFFOLK VA 23434-3820 PARRIS ISLAND SC 29207-6720

USA USA

VSTZ

TRAVIS ASSOCIATION FOR THE BLIND

4509 FREIDRICH LANE

BUILDING 4 SUITE 402

AUSTIN TX 78744-1812

CONTINUED ON NEXT PAGE

SPM1C1-08-Q-0140 3 30

UPS CODES:

PGC UPC NSN NOMEN SIZE

02036 718020 210872 8410012794473 CAP,SERVICE 21

02036 718020 210889 8410012794474 CAP,SERVICE 21 1/2

02036 718020 210896 8410012794475 CAP,SERVICE 22

02036 718020 210902 8410012794476 CAP,SERVICE 22 1/2

02036 718020 210919 8410012794477 CAP,SERVICE 23

02036 718020 210926 8410012794478 CAP,SERVICE 23 1/2

02036 718020 210933 8410012794479 CAP,SERVICE 24

02036 718020 338996 8410014003461 CAP,SERVICE 20

02036 718020 339009 8410014003462 CAP,SERVICE 20 1/2

02036 718020 339481 8410014405993 CAP,SERVICE 24 1/2

02036 718020 339474 8410014405992 CAP,SERVICE 25

02036 718020 339498 8410014406927 CAP,SERVICE 25 1/2

02036 718020 339511 8410014406929 CAP,SERVICE 26

SQUARE INCH TABLE:

ITEM: CAP, SERVICE, WOMAN'S, POLY/WOOL GAB, GREEN MC SHADE 2212

SPEC: MIL-C-29454, 19 FEB 1988

PATTERN DATE: 7 APRIL 1989

[X] SQUARE INCH TABLE ALLOWANCES

Below is the table of square inches by size for the item being procured andis hereby incorporated and made a part of this soliciatation and resultant contracts(s). This table shall be used to compute adjustments of basic material usage due to size changes Clause 52.245.9P20. Changes in materials will be computed by multiplying the total calculated square inch adjustment for the basic material by the following percentage factors:

SIZE SQ IN

20 212 20 1/2 217 21 222 21 1/2 227 22 232 22 1/2 237 23 242 23 1/2 247 24 252 24 1/2 257 25 262 25 1/2 267 26 272

*PLEASE SEE ATTACHMENT FOR PACKAGING/LABELING INFORMATION AND ADJECTIVE

RATING SYMBOLOGY

SPM1C1-08-Q-0140 4 30

SECTION B

PR:

NSN: 8410-01-400-3461

ITEM DESCRIPTION:

PGC 02036

CAP, SERVICE: WOMEN'S, CLASS 3, POLYESTER/WOOL

GABARDINE, GREEN SHADE 2212

ADDITIONAL INFORMATION FOR MIL-C-29454:

INTERIM SPECIFICATION CHANGES BELOW AND

PATTERN DATE: 24 January 2006..

STANDARD SAMPLE: ROLL NO. 14-086883 IS

AVAILABLE AND APPLICABLE FOR BASIC MATERIAL

MIL-C-10176, TYPE II, CLASS 12, GREEN SHADE 2212

FOR SHADE, FINISH AND COLORFASTNESS.

INTERIM CHANGES TO MIL-C-29454:

PAGE 2, DELETE 'CCC-C-417'

DELETE 'MIL-C-297' REPLACE WITH

'A-A-52105 CLOTH, INTERLINING, COTTON OR SYNTHE-

WARP AND SUN HAIR-WOOL OR RAYON FILLING'

DELETE 'FED-STD-751' REPLACE WITH 'ASTM-D6193

STITCHES, SEAMS AND STITCHINGS'

'DELETE 'FED-STD-191'

PAGE 3, PARA 2.2 ADD:'THE AMERICAN ASSOCIATION

OF TEXTILE CHEMISTS AND COLORISTS'

TEST METHODS AS FOLLOWS:

'AATCC-8 COLORFASTNESS TO CROCKING

AATCC-15 COLORASTNESS TO PERSPIRATION

AATCC-70 WATER REPELLENCY: TUMBLE JAR DYNAMIC A

ABSORPTION TEST

AATCC-132 COLORFASTNESS TO WET DRYCLEANING

(REQUESTS FOR COPIES SHOULD BE ADDRESSED TO THE

AATCC, PO BOX 23325, RESEARCH, TRIANGLE PARK,

NC 27709)

AMERICAN SOCIETY FOR TESTING AND MATERIALS

TEST METHODS AS FOLLOWS:

ASTM-D1776 STANDARD PRACTICE FOR CONDITIONING

AND TESTING TEXTILES

ASTM-D1424-96 STANDARD TEST METHOD FOR TEARING

STRENGTH OF FABRICS BY FALLING-PENDULUM

TYPE (ELMENDORF) APPARATUS

ASTM-D5034 BREAKING FORCE AND ELONGATION OF

TEXTILE FABRICS (GRAB TEST), G-E OR G-T

ASTM-D276 IDENTIFICATION OF FIBERS IN TEXTILES

ASTM-D629 QUANTITATIVE ANALYSIS FOR TEXTILES

SPM1C1-08-Q-0140 5 30

SECTION B

ASTM-D747 STANDARD TEST METHOD FOR APPARENT

BENDING MODULUS OF PLASTICS BY MEANS OF A

CANTILEVER BEAM

ASTM-D3775 STANDARD TEST METHOD FOR FABRIC

COUNT OF WOVEN FABRIC

ASTM-D3776 MASS PER UNIT AREA (WEIGHT)

ASTM-D5034 BREAKING STRENGTH AND ELONGATION

OF TEXTILE FABRICS (GRAB TEST), G-E OR G-T

RESTRAIN FABRICS

ASTM-E498 STANDARD SOURCE METALS COLLECTION

ASTM-D6193 STANDARD PRACTICE FOR STITCHES AND

AND SEAMS

ASTM-D5427 ACCELERATED AGING OF INFLATABLE

RESTRAIN FABRICS

(APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO

ASTM, INTL, PO BOX 3700, 100 BARR HARBOR

DRIVE, WEST CONSHOHOCKEN, PA 19428)'

ANSI/ASQC Z1.4 SAMPLING PROCEDURES AND

TABLE FOR INSPECTION BY ATTRIBUTES:

(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

TO AMERICAN SOCIETY FOR QUALITY CONTROL, 611 E.

WISCONSIN AVENUE, PO BOX 3005, MILWAUKEE, WI

53201-3005).'

PAGE 4, PARA. 3.3.1, LINE 4, DELETE 'MIL-C-823'

SUBSTITUTE WITH 'MIL-DTL-823'.

PAGE 4, PARA. 3.3.1, LINE 6, DELETE

'MIL-C-10176, SUBSTITUTE 'MIL-DTL-10176'

PAGE 4, PARA. 3.3.2, SECOND LINE, DELETE '2208',

AND SUBSTITUTE '2209'.

PAGE 4, PARA. 3.3.2, LINING: AT THE END OF THE

PARAGARPH, ADD THE FOLLOWING: 'AS AN ALTERNATE,

A 100 PERCENT POLYESTER CLOTH, CONFORMING TO

CLASS 3 OF A-A-52106 MAY BE USED

PHYSICAL REQUIREMENTS

CHARACTERISTIC................REQUIREMENT

WEIGHT........................4.5 OZ/YD SQUARED

ENDS PER INCH (MINIMUM)

PICKS PER INCH (MINIMUM)

BREAKING STRENGTH

WARP (MINIMUM)................100 LBS

FILLING (MINIMUM).............50 LBS

DIMENSIONAL STABILITY.........+/-3% MAXIMUM

COLOR FASTNESS TO PERSPIRATION...GOOD

WET DRYCLEANING..................GOOD

CROCKING

WET.......................RATING OF 3.5

DRY.......................RATING OF 3.5'

SPM1C1-08-Q-0140 6 30

SECTION B

PAGE 4, ADD NEW PARAGRAPH: '3.3.3.3 OUTER TOP

CROWN FUSIBLE INTERLINING. THE MATERIAL SHALL

BE TWILL WOVEN INTERLING, 100% COTTON

WARP, 75-90% RAYON, 10-25% WOOL, 3.5 TO 4 OUNCE

WEIGHT, BLACK OR CHARCOAL GRAY WITH A POLYAMIDE

DOT. THE FUSIBLE SHALL BE KUFNER STYLE G35 OR

CROWN TEXTILE STYLE 241 OR EQUAL.'

PAGE 5, PARA. 3.3.5, DELETE 'CCC-C-417'

SUBSTITUTE WITH THE FOLLOWING:

'THE BASE CLOTH SHALL BE A NON-WOVEN OR KNITTED

FABRIC MADE FROM COTTON, POLYESTER, OR COTTON

SUBSTITUTE 'THE COATED OR LAMINATING MATERIAL

THE BASE CLOTH SHALL BE A NON-WOVEN, WOVEN

OR KNITTED FABRIC MADE FROM COTTON, POLYESTER

OR COTTON/POLYESTER BLENDED YARNS. THE

LAMINATING MATERIAL OR COATING

USED FOR FACING THE CLOTH SHALL BE A SYNTHETIC

RESIN USED ON ONE SIDE OF THE CLOTH CONFORMING

TO THE CHART BELOW.

CHARACTERISTIC....REQUIREMENT......TEST METHOD

..................(MINIMUM)

WEIGHT.............6.0 OZ/SQ YARD...ASTM-D3776

BLOCKING...........1 OR MORE........ASTM-C751

CROCKING.........8.5 MUNSELL VALUE....AATCC-8

COLORFASTNESS TO ...GOOD..............AATCC-16

LIGHT..........................AATCC-16 (OPT A)

THERE SHALL BE NO STRIKING THROUGH OF THE

COATING OR LAMINATING TO THE BACK OF THE CLOTH.

THE CLOTH SHALL HAVE A PLAIN OR SATIN FINISH.

THE LEVELS OF INSPECTION AND ACCEPTABLE

QUALITY LEVELS (AQL'S) SHALL BE IN ACCORDANCE

WITH ANSI Z1/4'

PAGE 6, PARA 3.3.7, DELETE FROM 'SCARLETT' TO

END OF THE SENTENCE, SUBSTITUTE 'OLD GLORY RED

SHADE CLOSELY MATCH HL CABLE NO. 67156 COLOR.'

PAGE 6, PARA. 3.3.8, EYELETS.DELETE PARAGRAPH

IN ITS ENTIRETY REPLACE WITH THE FOLLOWING:

'THE EYELETS SHALL

BE BRASS, ROLLED FLANGE TYPE, WITH THE BARREL

SCORED WITH 6 TO 8 SCORES. THE EYELET SHALL BE

PRETREATED, ENAMELED WITH TWO COATS OF COLOR

CLOSELY MATCHING THE CAPS COLOR.'

PAGE 6, PARA. 3.3.10.1, LINE 1, DELETE 'V-T-276

TYPE IC2' AND SUSBTITUTE 'A-A-52094 TYPE III'.

LINE 3, DELETE 'TYPE IB3' & SUBSTITUTE 'TYPE I'.

LINE 7, DELETE 'V-T-276' AND SUBSTITUTE

'A-A-52094'.

SPM1C1-08-Q-0140 7 30

SECTION B

PAGE 6, PARA. 3.3.10.2, LINE 2, DELETE 'SCARLET'

SUBSTITUTE 'OLD GLORY RED SHADE TO CLOSELY MATCH

HL CABLE NO. 67156 COLOR.'

PAGE 6, PARA. 3.3.11, LINE, 2 DELETE 'DDD-L-20'

SUBSTITUTE 'MIL-DTL-32075'

PAGE 9, OPERATION 1.E, 6TH LINE, DELETE '(RIGHT

LEFT)' SUBSTITUTE '(LOWER LEFT TO UPPER RIGHT)'

PAGE 9, ADD NEW PARAGRAPH '1.J. CUT THE FUSIBLE

INTERLINING IN ACCORDANCE WITH THE OUTER TOP

CROWN PATTERN PART.'

PAGE 10, AFTER OPERATION 4.B, ADD 'NOTE:

OPERATION 4.C SHOULD BE ACCOMPLISHED AFTER

THE BLOCKING IS COMPLETED IN OPER. 7.'

PAGE 11, TABLE 1, OPERATION 5, ADD TO END OF

PARAGRAPH TITLE 'AND FUSE THE OUTER TOP CROWN.'

SUBSTITUTE 'AND INTERLINE TOP, OUTER TOP, CENTER

CROWN AND LOWER CROWN PIECES.'

PAGE 11, OPER. 5, ADD NEW PARAGRAPH,

'5.A POSTION THE FUSIBLE

ON THE INSIDE OF THE OUTER TOP CROWN AND FUSE IN

ACCORDANCE WITH MANUFACTURER'S RECOMMENDATION.'

RENUMBER CURRENT PARA. 5.A TO 5.B

INTERIM SPECIFICATION CHANGES TO MIL-C-29454:

DEFECT M.', LINE 2, AFTER 'CROWN', ADD 'NOT

LEVEL OR'.

PAGE 34. UNDER DEFECTS: CORD: H. LINE 1, DELETE

'10-1/2' AND SUBSTITUTE '10-3/4' LINE 2, DELETE

'10' AND SUBSTITUTE ' 10-1/4'.

PAGE 36, UNDER DEFECTS, SWEATBAND, B.2, LINE

1, AFTER 'EXPOSED' ADD 'BY 1/8 INCH OR MORE'.

PAGE 38, PARA. 4.5.4.3, DELETE SUBJECT PARAGRAPH

IN ITS ENTIRETY, AND SUBSTITUTE: 'HEADSIZE

DIMENSIONS. CONTRACTOR'S CERTIFICATE OF

COMPLIANCE THAT THE PROPER SIZE BLOCK IS BEING

UTILIZED TO ACHIEVE THE REQUIRED HEAD MEASURE-

MENTS.'

PAGE 40, PARA 5.1.1 - DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE THE FOLLOWING:

'5.1.1. LEVEL A. EACH FINISHED CAP SHALL BE PRES

SERVED AS FOLLOWS:

. --EACH CAP SHALL BE WRAPPED WITH TISSUE PAPER

AROUND THE CENTER TOP AND INSERTED SNUGLY

SPM1C1-08-Q-0140 8 30

SECTION B

AGAINST THE SIDES OF THE BRIM.

--POSITION THE CAP OVER A SNUG-FITTING CYLIN-

DRICAL PAPERBOARD SUPPORT USING ADDITIONAL

TISSUE PAPER IN THE CROWN OF THE CAP AND AROUND

THE ENTIRE CAP, THUS PREVENTING ANY SHIFTING

WITHIN THE BOX.

THE CYLINDRICAL PAPERBOARD SUPPORT SHALL BE 3

(=/- 1/8) INCHES HIGH, WITH THE ENDS OVERLAPPED

APPROXIMATELY 1 INCH, AND SECURED BY EITHER

TAPING, STAPLING, OR ANY OTHER MECHANICAL MEANS.

--THE INDIVIDUALLY PACKAGED CAP SHALL BE PLACED

INTO THE FOLLOWING BOX:

- THE SQUARE STYLE KNOCK DOWN BOX SHALL CONFORM

TO VARIETY I,GROUP III, SIMILAR TO STYLE X

(SEE FIGURE 6) OF PPP-B-566 WITH A TUCK N-LOCK

BOTTOM AND A FOLDING LOCKING TOP WITH PROTRUDING

HANDLE TO CARRY THE BOX.

DELETE 'APPROXIMATLEY 10 INCHES (L) X 11 INCHES

(D) X 6 INCHES (W)' AND SUBSTITUTE ' A MINIMUM

OF 9 INCHES(W) X 11 INCHES (L) X 6-3/8 INCHES

(D);

THE BOX SHALL HAVE FINISHED INTERIOR DIMENSIONS

OF APPROXIMATELY 10' (L) X 11-1/2' (W) X 6' (D)

SIZED TO ACCOMMODATE THE COMPLETE SIZE RANGE.

THE HANDLE SHALL BE ON THE 10 X 6 INCHES TOP.

THE BOX SHALL BE MARKED WITH EITHER A LABEL OR

PRINTED MARKINGS ON THE TOP SIDE NEAR THE HANDLE

AND WRAPPED IN WHITE PAPER.'

PAGE 40, PARA. 5.1.2 - DELETE PARAGRAPH IN

ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING:

-'5.1.2 - COMMERCIAL. CAPS SHALL BE PRESERVED IN

ACCORDANCE WITH ASTM-D-3951.'

PAGE 40. PARA 5.2.1 LEVELA. DELETE PARAGRAPH IN

ITS INTIRETY AND SUBSTITUTE:

'PAGE 40. PARA.5.2.1 LEVEL A. EIGHTS CAPS OF ONE

SIZE AND CLASS ONLY, PACKAGED AS SPECIFIED IN

5.1.1 SHALL BE PACKED IN A FIBERBOARD SHIPPING

CONTAINER CONFORMING TO TYPE CF, CLASS WEATHER

RESISTANT, VARIETY SW, STYLE RSC OF PPP-B-636 TO

ACCOMMODATE 8 CAPS. TOWARDS THE END OF THE

CONTRACT, OR WHEN THERE IS LESS THSN THE REQUIRE

D AMOUNT PER CONTAINER OOF SAME SIZE, MIXED

SIZES MAY BE PACKED WITHIN THE SAME SHIPPING

CONTAINER.'

PAGE 41, PARA. 5.2.2 - DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE THE FOLLOWING:

'5.2.2 - LEVEL B - EIGHT (8) CAPS, OF ONE SIZE

AND CLASS, AS SPECIFIED IN 5.1, SHALL BE PACKED

IN A FIBERBOARD SHIPPING CONTAINER CONFORMING TO

SPM1C1-08-Q-0140 9 30

SECTION B

STYLE RSC-L, TYPE CF (VARIETY SW OR SF), CLASS

DOMESTIC, GRADE 275, OF PPP-B-636. LEVEL A

PACKAGES SHALL BE PACKED FLAT, TWO IN LENGTH,

TWO IN WIDTH, TWO IN DEPTH. INSIDE DIMENSIONS

OF EACH CONTAINER SHALL APPROXIMATE 24-1/2 (L) X

21 (W) X 12-1/2 (D) (INCHES). APPROXIMATE

DIMENSIONS ARE FURNISHED AS A GUIDE ONLY. EACH

SHIPPING CONTAINER SHALL BE CLOSED IN ACCORDANCE

WITH METHOD II AS SPECIFIED IN THE APPENDIX OF

PPP-B-636, EXCEPT THAT THE INSPECTION SHALL BE

IN ACCORDANCE WITH 4.5.5.'

PAGE 41, PARA. 5.2.3 - DELETE IN ITS ENTIRETY

AND SUBSTITUTE THE FOLLOWING:

'5.2.3. - COMMERCIAL. CAPS SHALL BE PACKED IN

ACCORDANCE WITH ASTM D 3951.'

PAGE 45, FIGURE 2. ON 'CORD DRAWING' DELETE 10-

1/4'+/-'AND SUBSTITUTE '10-1/2' +/-1/4'INCH.

DELETE OLD 'FIGURE 4' AND SUBSTITUTE NEW 'FIGURE

4.' (Ref. W2036)

NOTICE: BE ADVISED THAT THIS ITEM REFLECTS REDUCED AQL'S.

MATERIAL ACCEPTANCE:

DELETE CURRENT 'BARCODE LABEL/TAG'

REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG. EACH ITEM SHALL BE INDIVIDUALLY

BAR-CODED WITH A PAPER TAG FOR PERSONAL

CLOTHING ITEMS. THE PAPER USED FOR THE TAGS

SHALL BE STANDARD BLEACHED SULFATE HAVING A

BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH

FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT

PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.

THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE

A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)

ASSIGNED FOR ALL NSNS BY THE GOVERNMENT.

THE INITIAL 'UPC' MUST APPEAR BENEATH THE

CODE. THE BAR CODES FOR NSN AND UPC SHALL BE

A MEDIUM TO HIGH DENSITY AND SHALL BE

LOCATED SO THAT THEY ARE COMPLETELY VISIBLE

ON THE ITEM WHEN IT IS FOLDED AND PACKAGED

AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE

NO DAMAGE TO THE ITEM.

PACKAGING SECTION. ADD THE FOLLOWING:

NOTE: UNIVERSAL PRODUCT CODE INFORMATION

THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE

SPM1C1-08-Q-0140 10 30

SECTION B

(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON

WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/

TAGS:

BAR CODE OMITTED OR NOT MINOR A

READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) MINOR A

OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM MINOR A

CAUSES DAMAGE TO THE ITEM MAJOR

APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF

DOCUMENTS IS APPLICABLE TO THIS PROCUREMENT:

ADDITIONAL INFORMATION FOR A-A-52094A:

SIZE 16; TWIST Z; TYPE II; 16.0 OUNCES NOMINAL; GLAZED FINISH

NO ADDITIONAL INFORMATION

(Ref. T1481 - 4/08).

ADDITIONAL INFORMATION FOR V-T-295:

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-C-444346, ROLL #3729

(THE FOLIAGE GREEN 502 AREA OF THE PATTERN), AND REFERENCED FOR SHADE

ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER NOTICE.

INTERIM CHANGES TO V-T-295E:

PAGE 4, PARAGRAPH 3.4.1; DELETE IN ITS ENTIRETY AND SUBSTITUTE THE

FOLLOWING:

'3.4.1 MATCHING. THE SHADE OF THE THREAD SHALL MATCH THE APPROVED SHADE

STANDARD SAMPLE (SEE 6.3) WHEN VIEWED UNDER FILTERED TUNGSTEN LAMPS WHICH

APPROXIMATE ARTIFICIAL DAYLIGHT HAVING A CORRELATED COLOR TEMPERATURE OF

7000 PLUS OR MINUS 500K WITH ILLUMINATION OF 100 PLUS OR MINUS 20 FOOT

CANDLES, AND SHALL BE GOOD MATCH TO THE STANDARD SAMPLE UNDER INCANDESCENT

LAMPLIGHT AT 2300 PLUS OR MINUS 100K. WHEN END ITEM USE OF THE THREAD IS

NOT KNOWN, THREAD SIZES B OR FINER SHALL BE EVALUATED FOR SHADE MATCHING

AFTER REMOVAL OF FINISH THREAD TO BE USED FOR DRY CLEANABLE WOOL OR DRY

CLEANABLE WOOL BLEND CLOTHING OR IN END ITEMS REQUIRING DRYCLEANING SHALL

BE EVALUATED FOR SHADE MATCHING AFTER REMOVAL OF FINISH. REMOVAL OF

FINISH FROM THREAD, WHEN REQUIRED, SHALL BE AS SPECIFIED IN 4.3.1.1.'

PAGE 4, PARA. '3.5.3 TYPE III': DELETE AND SUBSTITUTE: '3.5.3 TYPE III.

TYPE III THREAD SHALL BE A SINGLE PLY CONSTRUCTION, BONDED TO UNITE ALL

THE MULTIFILAMENT YARNS TO FORM A SMOOTH EVEN MONOCHORD, CONSTITUENT

MULTI-FILAMENT YARNS BEFORE COMBINING SHALL CONTAIN ONLY THE ORIGINAL YARN

PRODUCER'S TWIST, AND HAVE AT LEAST 17 FILAMENTS PER YARN BY VISUAL

INSPECTION. THE FINAL TWIST SHALL BE NO MORE THAN 4 T.P.I.'

SPM1C1-08-Q-0140 11 30

SECTION B

PAGE 6, PARA. 3.7, PHYSICAL REQUIREMENTS. TABLE II, UNDER 'ELONGATION

PERCENT MAXIMUM' COLUMN ACROSS FROM 'LETTER SIZE FF' DELETE '26' AND AND

SUBSTITUTE '35.'

PAGE 7, TABLE III, UNDER 'LETTER SIZE': ADD THE FOLLOWING NEW SIZE: 'FF 1

154 2,151 3,850 17.5 35'.

PAGE 10, PARA. 3.9.1.2. DELETE IN ITS ENTIRETY AND SUBSTITUTE: '3.9.1.2

POLYPROPYLENE. THE TUBES SHALL BE MOLDED FROM A VIRGIN PROPYLENE

HOMOPOLYMER PLASTIC (SEE 6.7) MEETING THE REQUIREMENTS OF CLASSIFICATION

I-48108, I-58108, OR I-58208 UNDER ASTM D-2146 (SEE 4.2.3).'

PAGE 11, PARAGRAPH 4.2.1.1 THREAD ON HOLDER EXAMINATION. LINE 7, DELETE

'4.0' AND SUBSTITUTE '2.5'

PAGE 12, PARAGRAPH 4.2.1.2. THREAD AS UNWOUND EXAMINATION. LINE 7, DELETE

'4.0' AND SUBSTITUTE '2.5'

PAGE 14, PARA. 4.3.1.1, LINE 7, DELETE 'SEE 6.3.1)'.

PAGE 15, PARAGRAPH 6.3.1: DELETE IN ITS ENTIRETY. PARA. 6.1.1, LINE 1:

DELETE 'I AND II' AND SUBSTITUTE 'I,II AND III'.

PAGE 17, PARA. 6.7. DELETE AND SUBSTITUTE: '6.7 MATERIAL FOR

POLYPROPYLENE TUBES. EL REXENE 11-S-5 AND EXXON PP-1074 MATERIALS HAVE

BEEN USED SATISFACTORILY TO MAKE INJECTION MOLDED TUBES MEETING THE

REQUIREMENTS SPECIFIED IN 3.9.1. RESPECTIVE RESINS ARE MADE BY EL PASO

PRODUCTS, ODESSA, TX 79761 AND EXXON CHEMICALS AMERICAS, HOUSTON, TX,

77001.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS IDENTIFIED AS ROLL

#3721 (THE FOLIAGE GREEN 502 AREA OF THE PATTERN), AND REFERENCED FOR

SHADE ONLY. THIS STANDARD IS TEMPORARY UNTIL FURTHER NOTICE.

(ref. T0708 - 5/23/06)

ADDITIONAL INFO FOR NN-P-71: NO ADDITIONAL INFORMATION FOLLOWS..

(Ref. T0829 - 9/11/06)

ADDITIONAL INFORMATION FOR CCC-C-417:

NO ADDITIONAL INFORMATION

MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE

REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12, 1981, INCLUDING INTERIM

FEDERAL SPECIFICATION PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY

CANCELLED, AND REPLACED WITH ASTM-D-5118, STANDARD PRACTICE FOR

FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD

PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD

SPM1C1-08-Q-0140 12 30

SECTION B

SHIPPING CONTAINERS.

(ref. T0605 - May 31, 2006)

ADDITIONAL INFORMATION FOR MIL-C-297:

NOTE: COMMERCIAL ITEM DESCRIPTION A-A-52105

IS AUTHORIZED IN PREFERENCE TO MIL-C-297

INTERIM CHANGES TO MIL-C-297G:

PAGE 2, ADD THE FOLLOWING NEW PARAGRAPH:

'2.1.3 OTHER PUBLICATIONS. THE FOLLOWING

DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE

EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE SPEC-

IFIED THE ISSUES OF THE DOCUMENTS WHICH ARE DOD

ADOPTED SHALL BE THOSE LISTED IN THE ISSUE OF

THE DODISS SPECIFIED IN THE SOLICITATION. UNLESS

OTHERWISE SPECIFIED, THE ISSUES OF DOCUMENTS NOT

LISTED IN THE DODISS SHALL BE THE ISSUES OF THE

NON GOVERNMENT DOCUMENTS WHICH ARE CURRENT ON

THE DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMIST AND

COLORISTS (AATCC)

AATCC 20 - FIBER ANALYSIS: QUALITATIVE

PAGE 8, TABLE III, UNDER TEST METHOD COLUMN,

LINE 2, DELETE '1600' AND SUBSTITUTE 'AATCC 20'.

(Ref. T0897)

A-A-52105 CLOTH, INTERLINING, COTTON OR

. STNTHETIC WARP, AND SPUN HAIR-

. WOOL OR RAYON FILLING, 5/7/91

(SEE PGC 93380)

ADDITIONAL INFORMATION FOR MIL-C-368:

(USE OF IMPORTED YARN AUTHORIZED FOR

CLASS 1 CLOTH)

INTERIM CHANGES TO MIL-C-368J:

PAGE 2, PARA. 1.2, ADD THE FOLLOWING:

'CLASS 4 - TWILL, 3.7 OUNCE, RELAXED FINISH.'.

PAGE 3, PARA. 2.2, ADD THE FOLLOWING:

'AATCC 20 - FIBER ANALYSIS: QUALITATIVE'

PAGE 4, TABLE I, UNDER 'CLASS' COLUMN, DELETE

'1' AND SUBSTITUTE '1 AND 4'.

PAGE 8, ADD THE FOLLOWING NEW SUBPARAGRAPH:

'3.8.1 RELAXED FINISH. CLASS 4 CLOTH SHALL HAVE

A RELAXED FINISH APPLIED ON A TENTER FRAME

DURING THE FINISHING PROCESS.'.

SPM1C1-08-Q-0140 13 30

SECTION B

PAGE 8, TABLE II, UNDER TEST METHOD COLUMN,

LINE 1, DELETE '1600' AND SUBSTITUTE 'AATCC 20'.

PAGE 8, TABLE II, ADD THE FOLLOWING:

'SHRINKAGE (CLASS 4) 3.8, 3.8.1 5580'.

ADDITIONAL INFORMATION FOR MIL-DTL-823L:

STANDARD SAMPLE FOR AIR FORDE BLUE SHADE 1620

IS AVAILABLE AND IS IDENTIFIED AS

PIECE NO. 93-02, AND IS REFERENCED FOR

SHADE, FINISH AND COLORFASTNESS.

ADDITIONAL INFORMATION FOR MIL-B-3461:

MIL-B-3461G BUTTON, INSIGNIA, METAL,

. UNIFORM AND CAP, 9/30/79;

. AMENDMENT 6 DTD 6/24/03

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-DTL-10176:

INTERIM SPECIFICATION CHANGES TO MIL-DTL-10176K:

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE

CLOTH SHALL BE PIECE DYED.

3.7.3, LINE 2: DELETE '5.5' AND SUBSTITUTE '5.0'

ADD THE FOLLOWING PARAGRAPHS:

'3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED

, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE

FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT

AND SHALL CONFORM TO THE REQUIREMENTS

SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN

4.4.4.

3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE

INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR

SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN

RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER

ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN

4.4.4.'

PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD

EXAMINATION, LINE 3, DELETE '10' AND SUBSTITUTE

'7', LINE 4, DELETE '12' AND SUBSTITUTE '8'

TABLE II, BELOW 'PH': ADD THE FOLLOWING UNDER

THEIR RESPECTIVE COLUMNS:

'WATER REPELLENCY:

SPRAY RATING:

INITIAL--------3.7.3.1---------5526

AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526

SPM1C1-08-Q-0140 14 30

SECTION B

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER

ALCOHOL WETTING AGENT SHALL BE USED TO INSURE

SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT

FINISH IS NOT RELEASED.

THE WATER REPELLANT TREATMENT MUST BE

APPLIED BEFORE THE SPONGING OPERATION.

ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.

CODE OF FEDERAL REGULATIONS

16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES

ACT REGULATIONS.

29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH

STANDARDS.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO U.S

GOVERNMENT PRINTING OFFICE, SUPERINTENT OF

DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC

20402-9328.)

PRINCIPLES AND METHODS OF TOXICOLOGY,

A. WALLACE HAYES (EDITOR), 1989, PP 394-396.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO RAVEN

PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK,

NY 10036.)

TOXICITY. THE FINISHED CLOTH SHALL NOT

PRESENT A DERMAL HEALTH HAZARD WHEN USED

AS INTENDED.

TOXICITY ASSESSMENT. THE CONTRACTOR MUST

FURNISH INFORMATION WHICH CERTIFIES THAT

THE FINISHED PRODUCT IS COMPOSED OF MATERIALS

WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR

PROVIDE SUFFICIENT TOXICITY DATA TO SHOW

COMPATIBILITY WITH PROLONGED, DIRECT SKIN

CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD

INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION

STUDY IN LABORATORY ANIMALS AND A REPEATED

INSULT HUMAN PATCH TEST (MODIFIED DRAIZE

PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER

THE SUPERVISION OF A QUALIFIED DERMATOLOGIST

USING AT LEAST 100 FREE LIVING INDIVIDUALS.

INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,

NAVY SHADE 3346 ONLY.

APPLICABLE WHEN PROCURING CLOTH FOR THE

FOLLOWING ITEMS:

SPM1C1-08-Q-0140 15 30

SECTION B

COAT, MANS, BLUE, DRESS, MIL-C-29107

COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628

SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631

SLACKS, WOMAN'S, MIL-S-29630

TROUSERS, MANS, CLASS 12 MIL-T-41828

(REF. T0969)

ADDITIONAL INFO FOR MIL-P-15011: NO ADDITIONAL INFORMATION FOLLOWS.

(ref. T0834 - October 18, 2006)

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING:

INTERNATIONAL STANDARDS ISO 9001:2000 OR AMERICAN SOCIETY FOR QUALITY ASQ

2003 VERSION.

HIGHER LEVEL INSPECTION SYSTEM:

THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR BID PROPOSAL FOR

EVALUATION AND APPROVAL BY DSCP'S CONTRACTING OFFICER.

INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT LIMITED TO THE INTERNATIONAL

STANDARDS ISO 9002 OR ASQ 2003 MAY BE UTILIZED IF TAILORED TO THE SPECIFIC

QUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION.

(Ref. T1286 - 9/11/06)

ADDITIONAL INFORMATION FOR MIL-E-17568:

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR MIL-C-19559:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1623)

ADDITIONAL INFORMATION FOR MIL-E-20652/1B:

NO ADDITIONAL INFORMATION FOLLOWS..

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW

DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: 'THE

SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE

OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE

INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE

VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE'.

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA

4.1.2,LINE 4: DELETE 'B-97' AND SUBSTITUTE 'B-91'.

SPM1C1-08-Q-0140 16 30

SECTION B

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING

SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND

1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1-

TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE

DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE

USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN BASIC

OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.

PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING:

'THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER

EDGE OF THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES WITHIN THE CLAMP AND

1' OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF

THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE.'

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5,

PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS AND

BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE SPECIMENS

AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A

PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS

TEMPERATURE RANGE CORRESPONDS TO A SETTING OF 'HIGH' ON THE TEMPERATURE

INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR

UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER.'

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS

AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: 'THE

SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED

IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS

TEMPERATURE RANGE CORRESPONDS TO A SETTING OF 'HIGH' ON THE TEMPERATURE

INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40 MINUTES OR UNTIL

SAMPLES ARE DRY.'

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1,

PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD 'PER SAMPLEUNIT'. PAGE 1,

PARA. 4: DELETE 'APPARATUS' AND SUBSTITUTE 'APPARATUS'. PAGE 1, PARA.

5.1, LINE 3: AFTER 'AT' DELETE'APPROXIMATELY'.

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF' ADD '+-'. LINE 6: AFTER

'TO' ADD '+-'.

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING:'5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING

IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR

FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL

ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS

YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD

OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000

VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE

VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON

THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE

AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY.'

SPM1C1-08-Q-0140 17 30

SECTION B

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH 'IF THE SPECIMEN

DID' IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: 'RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND

DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED.'

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE:

'REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS.'

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: 'THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL

BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE

OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH

VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,

THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN

BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE

AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH

THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC

ISACCEPTABLE OR NON-ACCEPTABLE.'

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH

'406D'.

AFTER PARA. 7.1, ADD THE FOLLOWING: '7.2 NOTE: IF THE MODEL 406D STATIC

DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR

THE TEST.'

(Ref. T0215 - 05/17/07)

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN CANCELLED AND REPLACED BY

ASTM-D-6193, 4/98 STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE TO FED-STD-751.

(ref. T0216 - May 18, 2006)

ADDITIONAL INFORMATION FOR MIL-STD-105:

NOTE: MIL-STD-105 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING:

'AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) ANSI/ASQC Z1.4 - SAMPLING

PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES'.

APPLICATION FOR COPIES SHOULD BE OBTAINED FROM:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WI 53203

(Ref. T0301)

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE - DATED 19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE

SPM1C1-08-Q-0140 18 30

SECTION B

DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF

DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING

CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE

LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS 'PACKING LIST

HERE' SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

(Ref. T0303 - May, 2006)

ADDITIONAL INFORMATION: MIL-STD-147D IS HEREBY CANCELLED AND REPLACED

BY MIL-HDBK-774, 'PALLETIZED UNIT LOADS', DATED 30 AUGUST 2004

(See T0035 for MIL-HDBK-774A) (Ref. T0306 - 03/28/2007, paa2775)

INTERIM CHANGES TO A-A-50083

PAGE 1, AFTER PARA. 1.1 DESIGN AND CONSTRUCTION,

INSERT THE FOLLOWING PARAGRAPH:

PARA. 1.2 MATERIAL. THE PLASTIC BAGS SHALL BE

FABRICATED FROM CLEAR POLYOLEFIN MATERIAL

CONFORMING TO L-P-378. THE THICKNESS OF THE

MATERIAL SHALL BE 0.0001 TO 0.0009 INCHES IN

ACCORDANCE WITH L-P-378.

RENUMBER PARA. 1.2 FIT AND SIZE AS PARA. 1.3

FIT AND SIZE. RENUMBER PARA. 1.3 CLOSURE AS

PARA. 1.4 CLOSURE.

SPM1C1-08-Q-0140 19 30

SECTION B

CLIN PR PRLI U/I QUANTITY UNIT PRICE TOTAL PRICE

0001 0001 EA 1624 $ $

NSN UPC SIZE PGC

8410014003461 N/A N/A N/A

DELIVER FOB: See Clause

QTY VARIANCE: PLUS 2% MINUS 2%

INSP/ACCEP POINT: See Clause

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 008: PRES MTHD = 10: CLNG/DRY = 0: PRESV MAT = 00:

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = 0:

UNIT CONT = X

INTRMDTE CONT =

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - 00 No special marking

For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence.

SPM1C1-08-Q-0140 20 30

SECTION B

PARCEL POST ADDRESS:

SD0131

TRAVIS ASSOCIATION FOR THE BLIND

4509 FREIDRICH LN BLDG 4 SUITE 402

AUSTIN TX 78744-1812

US

FREIGHT SHIPPING ADDRESS:

CONTACT TRANS OFF AT ADMIN OFF PRIOR TO SHIPMENT

M/F: (TCN) XXX

PROJ TP

SUP ADD SIG A

ADDED MARKING FOR FREIGHT SHIPPING ADDRESS:

SD0131

FOR GOVERNMENT USE ONLY: IPD

DIC A02 DIST ADV FC

SPM1C1-08-Q-0140 21 30

A00E01 CAUTION NOTICE - C&T ELECTRONIC INVOICING

(OCT 2007) DSCP

The Directorate of Clothing and Textiles (C&T) requires electronic invoicing on all contracts unless another method is mutually agreed to by the Contractor, the Contracting Officer, the contract administration office, and the payment office.

UTILIZATION OF WIDE AREA WORKFLOW - RECEIPTS AND ACCEPTANCE

(WAWF-RA) IN CONJUNCTION WITH DFARS 252.232-7003, Electronic Submission of Payment Requests.

The Directorate of Clothing and Textiles utilizes VIM-ASAP, which is short for DLA Virtual Item Manager ARN Supply-Chain Automated Processing, to transmit data to WAWF-RA. VIM-ASAP is the only authorized method to electronically process requests for payment to WAWF-RA for the Directorate of Clothing and Textiles. VIM-ASAP will give you visibility of contract information, track production status and print labels. VIM-ASAP pre-populates contract data on your invoices, such as unit price, contract numbers, item numbers, addresses, and many other fields that will save you labor and time.

Advanced Shipment Notifications (ASNs) associated with DFARS clause 252.211-7006, Radio Frequency Identification are sent via VIM-ASAP to WAWF-RA processes.

Please contact the VIM-ASAP help desk at 888-940-7348 to get started today!

For questions about invoice preparation, just call the DFAS Customer Service Resource Center at 1-800-756-4571, or

Check out these resources:

http://www.dfas.mil/contractorpay.html ...under the 'Contractor/Vendor Pay' link.

http://www.dfas.mil/ ... information regarding bill paying process and additional points of contact.

A00E03 CAUTION NOTICE - Small Business Set-Aside & FPI

(MAR 2004) DSCP

This solicitation has been issued pursuant to Section 811 of the FY 2002 DoD Authorization Act, specifically, DFARS 208.602(a)(ii). A timely offer from the Federal Prison Industries (FPI) will be considered for award in accordance with the specifications and evaluation factors delineated in this solicitation.

If this solicitation is set-aside for small business participation and is being issued pursuant to DLAD 8.602(a)(iii)(90) and 19.502-1(b)(90) (as contained in PROCLTR 2002-09), see provision 52.219-9001, Set-Asides of Acquisitions of Items Listed in the Schedule of Products Made in Federal Penal and Correctional Institutions, for additional information.

SECTION C

C11E01 52.211-9P03 SPECIFICATIONS (JAN 1992) DSCP

SECTION D

D00E01 LABELING/PACKAGING FOR DRESS CLOTHING ITEMS

(MAR 2004) DSCP

The following list shows items which require labeling on the packaging in accordance with the attached graphics depicting the DSCP logo and a product line name. Although labeling is required on all of these items, it may not be required on all packaging. For example, while skirts are required to be packaged in a poly bag, those bags do not need to be printed with the DSCP logo and product line name. However, poly bags for shirts and sweaters must be printed with the DSCP logo and product name.

SEWN-IN

ITEM POLY BAG LABELS HANG TAG BOX

All-Weather Coats No Yes Yes No

Jackets No Yes Yes No

Overcoats(Peacoats) No Yes Yes No

Sweaters Yes Yes No No

Jumpers No Yes Yes No

Skirts No Yes Yes No

Coveralls No Yes Yes No

Shirts Yes Yes No No

Garrison Caps Yes Yes No No

Berets Yes Yes No No

Trousers, Utility No Yes Joker Tag No

Slacks, Utility No Yes Joker Tag No

The following is a chart that shows the branch of service and the correlating product line name to be used.

SERVICE PRODUCT LINE NAME

Army Garrison Collection

Navy Quarterdeck Collection

Air Force Wings Collection

Marine Corps Valor Collection

Coast Guard Guardian Collection

Common Service (used by 2 or more services) Defender Collection

PMS color numbers are as follows:

DSCP website -- PMS # 287U (Blue)

Product line name (e.g., Garrison Collection) -- PMS # 287U (Blue)

Tag line ('...the perfect fit') -- PMS # 187U (Red)

DSCP logo -- MS # 187U (Red) - 2nd & 4th vertical stripes in shield; PMS # 287U (Blue) - outline of eagle and wings, background of star in shield, DSCP lettering; and White (no PMS # assigned) - 1st, 3rd & 5th vertical stripes in shield, star in shield, eagle's head.

Wording (including 'Made in USA') on reverse of hang tag and poly bag -- PMS # 287U (Blue).

The following are the specifics regarding sewn-in labels, hang tags, and printed poly bags. It is noted that the DSCP logo and product line names are to be recreated from the graphics shown later in this document, so that the logo and the font, font size, and size of the logo are exactly as shown. Further, it is noted that the DSCP website is to be italicized.

POLY BAGS

Dimension -- For shirts and sweaters: White background, 3' H completely surrounding the bag. Position white background approx 1/3 of the way up from bottom of bag.

For garrison caps: white background, 3' H x approx 6' W (front of bag) and 8' W (reverse of bag), positioned lengthwise on the bag approx 3' (front of bag) and 2' (reverse of bag) from closed end of bag and centered top-to-bottom.

For berets: white background, 3' H x 6' W (front of bag) and 8' W (reverse of bag); centered on the front and approx 2' below the open end of the reverse; positioned with the open end of the bag above the DSCP logo on both the front and reverse sides. Insert the beret so that the combination label is visible through the reverse side of the bag.

Packaging -- For dress shirts only: commercial packaging (including pins, cardboard backing, plastic collar stands, etc.)

Self-Adhesive Label -- For sweaters: size and NSN must be printed in black ink on a self-adhesive label approximately 1 1/2' W x 3/4 H, affixed on the bottom right hand corner of front of poly bag, below the white background with the DSCP logo and product line name. Approx fonts: Size - 14 point; NSN - 10 point. The size shall be indicated by the letters S, M, L, XL, etc, followed by the required numerical size - for example, M (38-40). For garrison caps: replace paper identification label (required to be placed inside the poly bag) with a self-adhesive label of the same approx size and

SPM1C1-08-Q-0140 22 30

containing the same information. Affix the label on the lower right corner of the front of poly bag, below the white background with the DSCP logo and product line name. For utility slacks and trousers: self-adhesive commercial leg strip with DSCP logo/website and garment size.

SEWN-IN LABELS

Small Label(1) Large Label(2)

Label Dimension 2 3/4' W x 1 5/8' H 3' W x 3' H or 1 1/2' W x 2' H

Label Color White White

Border N/A 4 1/2 point, PMS #287U (Blue), 1/4' from all edges

Notes:

(1) For all items other than those listed in note 2. Use 2 1/4' W x 1 5/8' H for shirts with double yoke; use 1 1/2' W x 2 1/8' H for shirts with without a double yoke.

(2) For All-Weather Coats, Overcoats (Peacoats), and Jackets.

The contract requirement for labels and packaging other than DSCP labeling and packaging remains as specified in the spec or CID except as noted. Stitch the DSCP labels as follows:

for skirts, trousers and slacks, and shirts with a double yoke, stitch on both ends; for Coats, Overcoats, Jackets, and Jumpers, stitch on all four sides.

LABEL PLACEMENT

Item / Placement

SHIRTS -- For shirts with a double yoke: the small size DSCP label shall be centered on the inside of the double yoke below the collar, and must be visible through the poly bag when commercially packaged. The size/NSN label shall be centered and caught in the double yoke seam, beneath the DSCP label. For shirts without a double yoke: the small size DSCP label shall be looped and be centered and caught in the collar seam, on top of, but not attached to, the size/NSN label. The product line name will have to be stacked in order to fit this smaller sized label. The size/NSN label shall be approx 1 1/2' W x 2 3/4' H, printed in the required font size, centered and stitched in collar seam underneath, but not attached to, the DSCP label, so that it extends beyond the bottom of the DSCP label and is completely visible.

ALL-WEATHER COATS -- The large size DSCP label shall be centered and stitched on the left facing, approximately 10'-12' above the bottom edge. If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

OVERCOATS (PEACOATS) -- The large size DSCP label shall be centered and stitched in the coat, approximately 1' from the neck seam. If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

SKIRTS -- The small size DSCP label shall be stitched on the liner, approximately 2' down from the waistband and 1/4' from the edge of the liner; if there is no liner, stitch the label on the outside back ply of the pocketing, slightly above the combination label. Alternatively, the label may be looped and caught in the inside waistband seam.

SWEATERS -- The small size DSCP label shall be looped and be centered and stitched in the collar seam, with the combination label information printed on the reverse. The size and NSN shall be printed on a self-adhesive label, approximately 1 1/2' H x 3/4' W, and shall be placed on the poly bag in the lower right-hand corner of the bag.

JACKETS (including utility jackets) -- The large size DSCP label shall be centered and stitched in both the jacket and the liner (if required), approximately 1' from the neck seam.

If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

JUMPERS -- The small size DSCP label shall be centered and stitched approximately 1' from the neck seam. Stitch the size/combination label just beneath the DSCP label.

TROUSERS and SLACKS (utility trousers and slacks only) -- The small size DSCP label shall be stitched on the waistband (if sufficiently wide) or outside back ply of the pocketing (if applicable).

GARRISON CAPS -- The small size DSCP label shall be stitched on the inside of the cap, on the opposite side from the combination label

BERETS -- The small size DSCP label shall be stitched on the inside of the beret, slightly above the combination label.

PLEASE NOTE THAT SEWN-IN LABELS (LARGE AND SMALL) ARE TO BE

WOVEN LABELS; PRINTED LABELS ARE NOT PERMITTED FOR THE DSCP

LABELS.

NOTE FOR SHIRTS: WHEN SHIPMENTS ARE REQUIRED TO A MILITARY

CLOTHING SALES STORE, SHIRTS SHALL BE IN A PRINTED POLY BAG

AND PACKAGED COMMERCIALLY (i.e., WITH PINS, CARDBOARD SHIRT

BOARD, AND PLASTIC COLLAR STAND). WHEN SHIPMENTS ARE REQUIRED

TO A RECRUIT CENTER, SHIRTS SHALL HAVE NO COMMERCIAL

PACKAGING, AND SHALL BE PACKAGED ONLY IN A PRINTED POLY BAG.

SMALL SIZE DSCP SEWN-IN LABELS ARE REQUIRED FOR ALL SHIRTS,

REGARDLESS OF SHIPPING DESTINATION.

HANG TAGS(1)

Tag Dimension -- 4' H x 3' W

Tag Color -- White

Tag Spec -- 8 point weight, coated on both sides

Border -- 4 1/2 point, PMS # 287U (Blue), front and reverse, 1/4' from all edges

Note: (1)Right justify all printing on reverse side of hang tag.

HANG TAG PLACEMENT

Skirts, Slacks and Trousers -- Attach hang tag at or slightly below waistband.

Coats, Jackets, Jumpers, and Coveralls -- Attach near bottom of left sleeve.

JOKER TAGS(1)

Tag Dimension -- Approx 2' H x 3' W

Tag Color -- White

Tag Spec -- 8 point weight, coated front side DetailsTag will show DSCP logo, size, and retail UPC code.

Note: (1)

D00E02 POLY BAG MARKING (MAR 2004) DSCP

POLY BAG (REVERSE)

FOR ALL SERVICES:

MADE IN U.S.A.

DSCP Logo placed here] To place an order via our electronic catalog or for more information about us, visit our website at http://www.dscp.dla.mil. We now accept the IMPAC card for your ordering convenience. We are the Defense Supply Center Philadelphia (DSCP), your premier supplier of military clothing.

SPM1C1-08-Q-0140 23 30

D11C02 52.211-9010 SHIPPING LABEL REQUIREMENTS -

MIL-STD-129P (MAY 2006) DLAD

D11C03 52.211-9010 SHIPPING LABEL REQUIREMENTS -

MIL-STD-129P (MAY 2006) ALT I (AUG 2005)

D11E01 52.211-9P09 PACKAGING, PACKING AND MARKING

(JAN 1992) DSCP

D11E02 52.211-9P10 MARKING OF SHIPMENTS (JAN 1992)

DSCP

D47C01 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD

PACKAGING MATERIAL (WPM) (FEB 2007) DLAD

(a) THIS CLAUSE ONLY APPLIES WHEN WOOD PACKAGING MATERIAL

(WPM) WILL BE USED TO MAKE SHIPMENTS UNDER THIS CONTRACT

AND/OR WHEN WPM IS BEING ACQUIRED UNDER THIS CONTRACT.

(b) Definition.

Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD).

(c) All Wood Packaging Material (WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, 'Guidelines for Regulating Wood Packaging Materials in International Trade.' DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo.

(1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/).

(2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp.

(d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government.

SECTION E

E46A01 52.246-1 CONTRACTOR INSPECTION REQUIREMENTS

(APR 1984) FAR

E46A02 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE

(AUG 1996) FAR

E46A14 52.