SPI_F01-058-0122.pdf
PDF 981 KB Posted
- Solicitation number
- FA8213-25-R-2029
About this file
This document is a Special Packaging Instruction (SPI) for a Rocket Motor, specifically detailing packaging, preservation, and shipping requirements for a re-manufactured F-16 Canopy Jettison Rocket Motor. The SPI provides comprehensive instructions for packaging at two protection levels (Level A and Level B), with detailed specifications for container types, materials, marking requirements, and international wood packaging material standards. Key packaging elements include using barrier bags, heat sealing, cushioning, and specific container dimensions, with provisions for worldwide shipment and handling conditions that account for potential war reserve, mobilization, strategic deployment, and security assistance scenarios.
The document includes specific technical requirements such as heat treatment of wooden packaging materials, precise container measurements, and weight specifications. The palletization procedure outlines a standard configuration of 40 boxes per pallet, with a total palletized load weight of 403.35 pounds, including 320 pounds of rocket motors, 65 pounds of net pallet weight, 16.95 pounds of plywood, and 1.40 pounds of strapping. The packaging instruction is controlled by the 406th Supply Chain Management Squadron (SCMS) and follows military standards for preservation, marking, and international shipping regulations.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Item Description.pdf | ||
| REMAN SOW.pdf | ||
| ES7034.pdf | ||
| ADC SOW.pdf | ||
| REPSHIP.pdf | ||
| FA8213-25-R-2029.pdf | ||
| CADPAD Item Marking Instruction.pdf | ||
| CDRL.pdf | ||
| Packaging SOW.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 3: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 4: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTES
1. PLACE ITEM WRAPPED WITH REF.-2 IN BARRIER BAG REF.-3, REMOVE AIR AND SEAL.
2. USE REF.-1 AS REQUIRED TO PROVIDE A SECURE FIT FOR ITEM AND PREVENT ITEM FROM CONTACTING THE SIDES OF
THE SHIPPING CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .