SPI.pdf
PDF 459 KB Posted
- Attached to
- BALLSCREW ASSEMBLY For C-130
- Solicitation number
- SPRHA1-27-Q-0993
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document for military procurement, specifically detailing packaging requirements for a Ball Screw Assembly.
The document establishes comprehensive packaging specifications for part number 1650E412 (National Stock Number 1620-00-677-6681), governed by military preservation standard MIL-STD-2073. The item requires serviceable and unserviceable preservation methods using ASTM D6880 specification at Level A and Level B packaging. Cleaning and drying must follow IAW MIL-STD-2073, with preservative application per MIL-PRF-23827. Closure for both packaging levels requires ASTM D6880 compliance. The container dimensions are specified as 78 1/2 inches in length and width with 5 1/2 inches in depth for both levels, with gross cubic footage of 2.063 and gross weight of 56 pounds. The item dimensions measure 74 inches long, 4 1/8 inches wide, and 3 1/4 inches deep, weighing 34 pounds. Marking must comply with IAW MIL-STD-129, with the SPI number marked on the container identification side. Reusable containers and dunnage are not to be destroyed. The document includes detailed notes on preserving critical surfaces with MIL-PRF-23827, placing saddles approximately 18 inches from container edges, and using suitable packaging material such as ASTM D4727 fiberboard to eliminate slack or end play. All wooden packaging materials must be constructed from debarked, heat-treated wood (56 degrees Celsius or 133 degrees Fahrenheit for 30 minutes) and certified by an accredited agency recognized by the American Lumber Standards Committee in compliance with ISPM No. 15 international standards for phytosanitary measures.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| EDL.pdf | ||
| SOW.pdf | ||
| SPRHA127Q0993.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 09 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
NOTES
1. PRESERVE ALL CRITICAL SURFACES WITH MIL-PRF-23827. WRAP WITH REF.-2 AND SECURE WITH REF.-3, TAPE.
2. PLACE REF.-4 SADDLES APPROXIMATELY 18 INCHES FROM THE INSIDE EDGE OF REF.-5 SADDLES.
3. TAKE UP ANY SLACK OR END PLAY WITH SUITABLE PACKAGING MATERIAL NEXT TO THE CONTAINER END. SUCH
MATERIAL MAY BE ASTM D4727 FIBERBOARD AS REQUIRED.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .