SPI.pdf

PDF 315 KB Posted

Attached to
F-16 Flaperon
Solicitation number
SPRHA4-27-R-0029
Issued by

About this file

This is a Special Packaging Instruction (SPI) document issued by the Department of Defense for the item nomenclature "Flaperon" (Part/Drawing Number 16W021-51, National Stock Number 1560-01-205-8437). The SPI establishes mandatory packaging, preservation, and shipping requirements for this aircraft component.

The document specifies two packaging levels with detailed dimensional and material requirements. Level A packaging requires 53.623 cubic feet of gross space with a design fragility rating of 110, while Level B packaging requires the same cubic footage but reduced weight specifications of 310 pounds. Both levels comply with Military Preservation standard IAW MIL-STD-2073 using serviceable and unserviceable methods rated as 10 each, and employ cleaning and drying per MIL-STD-2073 with no preservative (N/A). Marking must follow IAW MIL-STD-129 with special instructions to mark the SPI number on the identification side of the container and designate the reusable container and dunnage as "Do Not Destroy." Closure for both levels requires ASTM D6251 standards. The container dimensions are specified as 111 inches length by 38 inches width by 15 inches depth for both Level A and Level B, with the item weighing 95 pounds. The document includes detailed technical drawings depicting pad placement, interior cleat configuration, strapping procedures, and overall container assembly. All wooden materials, pallets, and packaging components must comply with International Standards for Phytosanitary Measures (ISPM No. 15), constructed from debarked, heat-treated wood certified by an accredited agency recognized by the American Lumber Standards Committee.

View the file

Other files

File Type Posted
EDL.pdf PDF
SOW.pdf PDF
MQR.pdf PDF
SPRHA427R0029.pdf PDF
CDRLFATR.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 26 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

NOTES

1. USE A-A-1936 TYPE II, ADHESIVE TO LAMINATE PADS, REF.-7 AND -8, TO INSIDE OF CONTAINER AS SHOWN.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

CAUTION NOTICES

File details come from the government source that posted it. Updated .