SPI.pdf
PDF 363 KB Posted
- Attached to
- F-16 Data Display Group
- Solicitation number
- SPRHA4-26-Q-0855
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document for a Data Display Group item (Part/Drawing No. 10-01125-08, National Stock No. 5995-01-143-5443). The document specifies detailed packaging requirements for military preservation and protection during storage and shipment.
The item must be packaged according to MIL-STD-2073 military preservation standards using either ASTM D6880 (MDD) or ASTM D5118 (RSC) methods, depending on packaging level. Level A packaging requires 1,854 cubic feet of gross volume with specific dimensions (33 3/4" L x 9 3/4" W x 7" D for center load point and 36 3/4" L x 11 1/4" W x 7 3/4" D for center drop point), while Level B reduces to 1,222 cubic feet with dimensions of 33" L x 9" W x 6" D and 33 3/8" L x 9 3/8" W x 6 3/4" D respectively. Packaging materials include A/R tape, cushioning, barrier bags, and top/bottom closures meeting specified ASTM and military standards. The instruction mandates closure per ASTM D6880 (Level A) and ASTM D1974 (Level B), along with marking per MIL-STD-129 including SPI number F01-143-5443. Critical requirements include use of debarked, heat-treated wood (56°C/133°F for 30 minutes) certified by the American Lumber Standards Committee for any wood packaging material per ISPM No. 15, applicable to both domestic and international shipments. The document is restricted to Department of Defense and U.S. DOD contractors only and was revised on 18 January 2012.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA426Q0855.pdf | ||
| SOW.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 09 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. WRAP ITEM IN REF.-5 TO PROTECT BAG, REF.-4 FROM BEING PUNCTURED AND TO ENSURE A SNUG FIT.
File details come from the government source that posted it. Updated .