SPI.pdf
PDF 523 KB Posted
- Attached to
- CASE, DIFFUSER, NONAI
- Solicitation number
- SPRHA1-26-Q-0545
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document issued by the 406 Supply Chain Management Squadron at Hill Air Force Base for military preservation and packaging requirements of a case diffuser for a nonaircaft gas turbine engine (Part Number 976768-1, National Stock Number 2835-00-432-5558 RP).
The document specifies packaging standards for both serviceable and unserviceable items using Military Preservation IAW MIL-STD-2073-1 with two protection levels. Level A packaging accommodates the most severe worldwide shipment, handling, and storage conditions including war reserve material, mobilization, strategic and theater deployment, and open storage. Level B packaging provides standard protection and may be used unless otherwise directed. The container dimensions for Level A are 21 3/4" x 21 3/4" x 7" (gross volume 3,083 cubic feet), and Level B containers measure 21" x 21" x 6" (gross volume 1,785 cubic feet). Packaging materials include laminated pads, tape, masking materials, and wrap conforming to ASTM standards D5486, D4727, D6123, and D6174. Marking requirements reference IAW MIL-STD-129 with SPI number F00-432-5558 displayed on the identification side of the container. The SPI includes detailed assembly diagrams showing pad placement, protective cushioning, and closure procedures. All wood packaging materials must comply with International Standards for Phytosanitary Measures (ISPM No. 15) through heat treatment and debarking certification by an accredited agency recognized by the American Lumber Standards Committee.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA1-26-Q-0545.pdf | ||
| SOW.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
CUI
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. LAMINATED PADS, REF.-1 AND REF.-4 TO REQUIRED THICKNESS USING ADHESIVE CONFORMING TO A-A-59692
OR EQUAL.
| Sheets and Views |
| 004325558-SHEET 01 |
| 004325558-SHEET 02 |
| 004325558-SHEET 03 |
| 004325558-SHEET 04 |
| 004325558-SHEET 05 |
| 004325558-SHEET 06 |
File details come from the government source that posted it. Updated .