SPI.pdf
PDF 368 KB Posted
- Attached to
- JTE - Transmitter, Radar
- Solicitation number
- SPRHA5-26-R-0651
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document for the packaging and preservation of a radar transmitter item for military use. The document specifies detailed requirements for packaging a TRANSMITTER, RADAR (Part or Drawing No. A9070-080901, National Stock No. 5840-01-583-3787) in compliance with Military Preservation IAW MIL-STD-2073.
The packaging instructions establish two preservation levels: Level A (serviceable method) and Level B (unserviceable method), both using ASTM D6251 standards. Container specifications include interior dimensions of 39" L x 25½" W x 19" D for both levels, with exterior dimensions of 41" L x 27½" W x 24½" D. The item weighs 167 lbs and has dimensions of 34" L x 20½" W x 14" D. Packaging materials include strapping, wrap/cushioning, barrier bags, end and side cushioning, and a wooden skid base, all with specific material specifications (ASTM D3953, A-A-59135, MIL-DTL-117, and ASTM D6199). All wood packaging material must be debarked and heat-treated to 56 degrees Centigrade (133 degrees Fahrenheit) for 30 minutes in compliance with International Standards for Phytosanitary Measures (ISPM No. 15) to prevent the spread of invasive species. Special markings include the SPI number on the identification side of the container, and the container must be reusable, marked for indoor storage only, and lifted by base only. Fragile labels are required on all sides.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| EDL.pdf | ||
| CDRLCPP.pdf | ||
| SOW.pdf | ||
| SPRHA526R0651.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 28 DECEMBER 2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
NOTES
1. DEPENDING ON WHICH NSN IS TO BE PACKAGED EXTRA CUSHIONING, REF.-6, MAY BE REQUIRED TO ENSURE A SNUG
FIT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .