SPI.pdf
PDF 368 KB Posted
- Attached to
- JTE Transmitter, Radar
- Solicitation number
- SPRHA5-26-R-0463
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document for a radar transmitter item. The document provides detailed packaging specifications for Part/Drawing Number A9070-080901, National Stock Number (NSN) 5840-01-583-3787, with Code ID 98747.
The transmitter must be packaged according to Military Preservation Standard IAW MIL-STD-2073, with both serviceable (Method 41) and unserviceable (Method 41) preservation methods specified. Packaging is required at two levels: Level A and Level B, both utilizing ASTM D6251 standards with Type A, Class III specifications. Level A containers measure 39 inches length by 25.5 inches width by 19 inches depth with gross dimensions of 15.986 cubic feet and gross weight of 292 pounds. Level B containers are identical in dimension. Item dimensions are 34 inches length by 20.5 inches width by 14 inches depth, with item weight of 167 pounds. The design fragility rating is 85 for both packaging levels. Marking must follow IAW MIL-STD-129, with special markings including the SPI number (F01-583-3787) on the identification side of the container. Closure specifications require ASTM D6251 for both packaging levels. Additional requirements include compliance with International Standards for Phytosanitary Measures (ISPM No. 15) for wood packaging materials, which must be debarked and heat-treated to 56 degrees Centigrade or 133 degrees Fahrenheit for 30 minutes with certification by an accredited agency. The document includes caution notices regarding assets packaged under previous editions, overseas and Foreign Military Sales (FMS) packaging requirements, and references seven line items for packaging components including strapping, wrap/cushion, barrier bags, and wooden skids. This instruction is restricted to DOD and U.S. DOD contractors only for administrative or operational use as of December 28, 2017.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| EDL.pdf | ||
| SPRHA526R0463.pdf | ||
| CDRL_CPP.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 28 DECEMBER 2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
NOTES
1. DEPENDING ON WHICH NSN IS TO BE PACKAGED EXTRA CUSHIONING, REF.-6, MAY BE REQUIRED TO ENSURE A SNUG
FIT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .