SPI.pdf

20 LBSITEM WT.

2169 MODMARCH 87DD

FORM

REQDP/N

QTY

SIZE:

(INCHES UNLESS SPECIFIED)

TOLERANCES ON FRAC. ± 1

8, DECIMAL ± .10, ANGLES ± 1°

DESCRIPTION

NOMENCLATURE OR

LEVEL B:

LEVEL A:

CLOSURE

IAW: ASTM-D1974

IAW: ASTM-D6880

COMPUTER GENERATED

SPECIFICATION

MATERIAL

SPI NO. F01-297-5252

CODE ID

98747

DESIGN FRAGILITY G

SPEC STYLE TYPE CL VRTY GR TR

AS SPECIFIED BELOW AND BILL OF MATERIALS

ILL. NATIONAL STOCK NO.PART OR DRAWING NO. CURRENT

SPECIAL MARKINGS:

A) SPI NO. F01-297-5252

PRESERVATIVE: MIL-PRF-16173 CODE O2

UNSERVICEABLE METHOD: 20

CLEANING & DRYING: IAW MIL-STD-2073

MILITARY PRESERVATION IAW MIL-STD-2073

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

MARKING IAW MIL-STD-129

001QUP

ICQ 000

CNTR O.D.

LEVEL B:

ITEM DIM

LEVEL A:

CNTR I.D.

LEVEL B:

LEVEL A:

GROSS WT LBS

ITEM NOMENCLATURE

PACKING

LEVEL

GROSS CU FT

B

A

ASTM-D5118

ASTM-D6880 (MOD)

REV

DATE

ORIGINAL CHK.

AUTH.

P.S.

SPECIAL PACKAGING INSTRUCTION

19 3/8

21 1/8

16 1/2

29 5/8

26 3/8

23 1/4

7 3/4

4 3/4

LENGTH WIDTH DEPTH

19 5/826 5/8

LEVEL A LEVEL B

3.260

2.292

SPI NO. (TPO)

SHEET 1 OF 3

A/R

A/R

A/R

TAPE, PACKAGING

TAPE, FILAMENT

WRAP

CUSHIONING SUPPORT

CUSHIONS, END

CUSHIONS, SIDE

CUSHIONS, TOP & BOTTOM

TOP AND BOTTOM (LEVEL A ONLY)

CONTAINER, EXTERIOR

3 X AS REQUIRED

1 X AS REQUIRED

AS REQUIRED

16 3/4 X 5 X 2

16 3/4 X 5 X 1

25 3/4 X 5 X 1

25 3/4 X 18 3/4 X 1

28 1/8 X 21 1/8 X 1/2

26 X 19 X 7 (ID)

ASTM-D5486 TYPE I OR V

ASTM-D5330 TYPE II

MIL-PRF-121 TYPE I

A-A-59135 CLASS 1, GRADE A

A-A-59135 CLASS 1, GRADE A

A-A-59135 CLASS 1, GRADE A

A-A-59135 CLASS 1, GRADE A

A-A-55057 TYPE A

ASTM-D5118 STYLE RSC, GRADE V3c

-9

-8

-7

-6

-5

-4

-3

-2

-1

D. NAY

D. THIEL

N. CORONADO

G. HOENIKE

1630-01-297-52522609597-1

HOUSING, PISTON, WHEEL BRAKE

F01-297-5252

B

V3cRSC

A

04075

REVISIONS

DESCRIPTIONLTR DATE

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

SERVICEABLE METHOD: 20

A 10144

REVISED, UPDATED SPECIFICATIONS

AND WOOD STATEMENT

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

CAUTION NOTICES

NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 2: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES

EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.

NOTICE 5: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 2 OF 3

ITEM NOMENCLATURE

98747

CODE ID

NOTES

1. APPLY MIL-PRF-16173, CODE 02, PRESERVATIVE TO CRITICAL SURFACES, WRAP WITH BARRIER, REF.-7, AND SECURE

WITH TAPE, REF.-8.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM

NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

HOUSING, PISTON, WHEEL BRAKE

F01-297-5252

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 3 OF 3

ITEM NOMENCLATURE

98747

CODE ID

ITEM

REFERENCE

-3

-8

-4

-5

-9

-3 -6

-7

HOUSING, PISTON, WHEEL BRAKE

F01-297-5252

-1