SPI.pdf
PDF 777 KB Posted
- Attached to
- GEARBOX, ACCESSORY (26-Q-0401)
- Solicitation number
- SPRHA1-26-Q-0401
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document for a Gearbox Accessory Drive for a Turbine Engine (Part/Drawing No. 50070768, National Stock No. 2635-01-208-0169).
The document specifies packaging requirements for both serviceable and unserviceable condition items using Military Preservation Standard MIL-STD-2073-1. Level A protection is required for the most severe worldwide shipment, handling, and storage conditions, such as war reserve material, mobilization, strategic and theater deployment, and open storage. Level B packing is permitted unless otherwise directed by the procuring country. The item dimensions are 50 1/2" length by 30" width by 17" depth at Level A, with gross cubic footage of 22.028 and gross weight of 230 lbs. Specific packaging materials include ASTM D6256 closure standards, with design fragility rating of 100 for both levels. The document includes detailed technical drawings and assembly instructions with component lists referencing various fasteners, blocking, cushioning, masking tape, wraps, and skids. All wooden materials must comply with International Standards for Phytosanitary Measures (ISPM No. 15) requirements, utilizing debarked, heat-treated lumber certified by an accredited agency. All openings must be capped and plugged prior to packaging. The SPI is marked as CUI (Controlled Unclassified Information) with distribution limited to DOD and U.S. DOD contractors only.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA1-26-Q-0401 CUI.pdf | ||
| PackagingSOW.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 15 APRIL 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: IAW DoDI 5200.48 4.5.a; MUST DO SO IN A MANNER MAKING IT UNREADABLE, INDECIPHERABLE, AND
IRRECOVERABLE.
CUI
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. ALL OPENINGS MUST BE CAPPED AND PLUGGED PRIOR TO PACKAGING.
| Sheets and Views |
| 012080169-SHEET 01 |
| 012080169-SHEET 02 |
| 012080169-SHEET 03 |
| 012080169-SHEET 04 |
| 012080169-SHEET 05 |
| 012080169-SHEET 06 |
| 012080169-SHEET 07 |
| 012080169-SHEET 08 |
File details come from the government source that posted it. Updated .