SPI.pdf
PDF 319 KB Posted
- Attached to
- PISTON, LANDING GEAR (26-R-0343)
- Solicitation number
- SPRHA1-26-R-0343
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is a Special Packaging Instruction (SPI) for the Piston, Landing Gear Strut item (Part/Drawing Number 2007602-103, National Stock Number 1620-01-252-4042 LE, CDDE ID 98747). The instruction specifies packaging requirements under Military Preservation IAW MIL-STD-2073, with serviceable and unserviceable methods both rated as level 20. The item requires cleaning and drying per MIL-STD-2073 and preservative application using MIL-PRF-16173, Code 2. Marking must comply with IAW MIL-STD-129, with the SPI number marked on the identification side of the container. Reusable containers and dunnage shall not be destroyed.
Packaging specifications include Level A and Level B requirements with gross cubic footage of 2.474 cubic feet and gross weight of 54 pounds for both levels. Container interior dimensions are 35 inches long by 11 inches wide by 8 inches deep for both levels, with exterior dimensions of 38 inches long by 12.5 inches wide by 9 inches deep. The item weighs 31 pounds. Closure specifications require ASTM D6880 for both levels. The document includes detailed packaging component requirements (wrap, strapping, cushioning, tape, hardware, and saddles) with material specifications, requirements for wood packaging material heat treatment and certification per ISPM No. 15, and three critical notes regarding preservative application to all bare metal surfaces, wrap placement and securing, and cushioning to prevent contact with wood or strapping. The instruction was revised in 2016 to add distribution statements and destruction notices.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PackagingSOW.pdf | ||
| SPRHA1-26-R-0343 CUI.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 29 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. APPLY PRESERVATIVE TO ALL BARE METAL SURFACES, INCLUDING INSIDE HOLLOW TUBE OF PISTON ASSEMBLY. ENSURE
ALL SURFACES ARE COMPLETELY COVERED.
2. USE WRAP, REF.-4 AND REF.-5, ON ALL PRESERVED SURFACES AND SECURE IN PLACE WITH MASKING TAPE, REF.-12.
3. USE CUSHIONING, REF.-6, TO PROTECT ITEM FROM CONTACT WITH WOOD OR STRAPPING.
File details come from the government source that posted it. Updated .