SPI.pdf
PDF 335 KB Posted
- Attached to
- F-16 Flap, Wing Dive Brake
- Solicitation number
- SPRHA426R0305
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document issued by the U.S. Air Force (406 SCMS/GULAA, Hill AFB, Utah) for military preservation and packaging of a Flap, Wing Dive Brake component. The SPI, CODE ID 98747, provides detailed specifications for packaging this item in accordance with MIL-STD-2073 (Military Preservation) and MIL-STD-129 (Marking). The document specifies two packaging levels—Level A and Level B—with different dimensional and material requirements. Level A packaging requires 56.776 cubic feet of gross space with 400 cubic feet of design fragility, while Level B requires the same gross space but increased design fragility of 400 cubic feet. Both levels use ASTM D6256 (MDD) standards for unnailed closure. Container dimensions vary by level, with Level A centered internal dimensions of 180" x 15¼" x 24½" and Level B centered internal dimensions of 180" x 15¼" x 24½", while exterior dimensions are 182" x 17¼" x 31¼" for both levels.
The packaging assembly incorporates numerous components including strapping steel, washers, bolts, bracing, masking tape, barrier wrap, felt cushioning, blocking materials, headers, bases, and various steel strips, all conforming to specified ASTM standards and military specifications. Critical preservation treatments include application of MIL-PRF-16173 Code 02 preservative to critical surfaces, MIL-PRF-46170 internally, and MIL-PRF-23827 Code 11 to bushings and bearings. The document mandates compliance with International Standards for Phytosanitary Measures (ISPM No. 15) requiring all wooden packaging materials to be constructed from debarked, heat-treated wood (HT to 56°C for 30 minutes) with certification by an ALSC-recognized accredited agency. The document includes detailed assembly diagrams and notes specifying fastening requirements using nails or staples conforming to ASTM F1667, felt cushioning installation procedures, and cautions regarding asset repackaging and overseas/FMS packaging requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| EDR1028.pdf | ||
| CDRLFATR.pdf | ||
| EDL1028.pdf | ||
| SOW.pdf | ||
| EDR1029.pdf | ||
| SPRHA426R0305.pdf | ||
| EDL1029.pdf | ||
| MQR.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 26 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
NOTES
1. APPLY MIL-PRF-16173, CODE 02 PRESERVATIVE TO CRITICAL SURFACES, MIL-PRF-46170 INTERNALLY AND
MIL-PRF-23827, CODE 11, TO BUSHINGS AND BEARINGS. COVER TREATED AREAS WITH BARRIER WRAP REF.-15 AND
SECURE WITH TAPE, REF.-17 THEN WRAP ITEM IN REF.-16 AND SECURE WITH REF.-17.
2. SECURE REF.-1 AND REF.-2 TO LID, AND REF.-12 TO REF.-7, USING NAILS OR STAPLES CONFORMING TO ASTM F1667.
2. LINE REF.-12, -18 AND -19 WITH FELT CUSHIONING, REF.-13, TO PREVENT DIRECT CONTACT BETWEEN ITEM AND
WOOD. USE ADDITIONAL FELT CUSHIONING IF NEEDED TO ENSURE A SNUG FIT. ADHERE USING ADHESIVE CONFORMING
TO A-A-1936 TYPE II OR EQUAL.
3. USE NAILS OR STAPLES IAW ASTM F1667 ON REF.-18 AND -19 TO REACH REQUIRED THICKNESS.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .