SPI.pdf

PDF 805 KB Posted Feb 4, 2026

Attached to: ICBM - Door, Launcher, Personnel Access
Solicitation number: SPRHA2-26-R-0005
Issued by: Defense Logistics Agency Aviation

About this file

Written by GovTribe AI · Feb 4, 2026

This is a Special Packaging Instruction (SPI) document issued by the Department of Defense for the packaging and preservation of a Door Launcher Personnel Access item (National Stock Number 1440-01-501-1539). The document, dated April 29, 2019, is restricted to Department of Defense and DOD contractors only and must be destroyed in accordance with DOD 5220.22-M or DOD 5200.1-R procedures.

The SPI specifies comprehensive packaging requirements using Military Preservation IAW MIL-STD-2073, with serviceable and unserviceable methods both using Level 20 protection. The item weighs 13,700 pounds and has dimensions of 41 inches diameter by 46 inches in height. Two protection levels are defined: Level A for severe worldwide shipment and storage conditions (war reserve, mobilization, open storage, deck loading), and Level B for standard conditions unless otherwise directed by the procuring country. The packaging includes detailed material specifications referencing ASTM and NSN standards for components such as washers, bolts, angles, cushioning, blocking, floor boards, shrouds, barriers, tape, and dunnage. The instruction provides technical drawings (Details A and B) illustrating assembly requirements, including specific drilling patterns for countersunk holes, nail placement using ASTM F1667 standards, and proper positioning of cushioning materials. All wooden packaging materials must be constructed from debarked, heat-treated lumber (56°C minimum for 30 minutes) certified by an accredited agency recognized by the American Lumber Standards Committee in compliance with International Standards for Phytosanitary Measures (ISPM No. 15) for international trade shipments.

View the file

Other files

File	Type	Posted
SPRHA226R0005.pdf	PDF	Feb 4, 2026
SOW.pdf	PDF	Feb 4, 2026
EDL.pdf	PDF	Feb 4, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 29 APRIL 2019. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

13,700 LBS

AutoCAD SHX Text

ITEM WT.

AutoCAD SHX Text

2169 MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

CLOSURE

AutoCAD SHX Text

IAW: ASTM D6256 & THIS INSTRUCTION

AutoCAD SHX Text

IAW: ASTM D6256 & THIS INSTRUCTION

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPI NO. F00-957-4632

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text 98747

AutoCAD SHX Text

DESIGN FRAGILITY G

AutoCAD SHX Text

SPEC STYLE TYPE CL VRTY GR TR

AutoCAD SHX Text

AS SPECIFIED BELOW AND BILL OF MATERIALS

AutoCAD SHX Text

ILL.

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

CURRENT

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

A) SPI NO. F00-957-4632

AutoCAD SHX Text

PRESERVATIVE: MIL-PRF-16172, CODE 02

AutoCAD SHX Text

UNSERVICEABLE METHOD: 20

AutoCAD SHX Text

CLEANING & DRYING: IAW MIL-STD-2073

AutoCAD SHX Text

MILITARY PRESERVATION IAW MIL-STD-2073

AutoCAD SHX Text

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

AutoCAD SHX Text

MARKING IAW MIL-STD-129

AutoCAD SHX Text

QUP

AutoCAD SHX Text

ICQ

AutoCAD SHX Text

CNTR O.D.

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

ITEM DIM

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

CNTR I.D.

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

GROSS WT LBS

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

PACKING

AutoCAD SHX Text

LEVEL

AutoCAD SHX Text

GROSS CU FT

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

ASTM D6256 (MOD)

AutoCAD SHX Text

ASTM D6256 (MOD)

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

AUTH.

AutoCAD SHX Text P.S.

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text 50 5/8

AutoCAD SHX Text 53 5/8

AutoCAD SHX Text

41 DIA. X 46

AutoCAD SHX Text 59 5/16

AutoCAD SHX Text

LENGTH WIDTH DEPTH

AutoCAD SHX Text 48 1/2

AutoCAD SHX Text 51 1/2

AutoCAD SHX Text 14,220

AutoCAD SHX Text

AutoCAD SHX Text 51 1/4

AutoCAD SHX Text 14,220

AutoCAD SHX Text

LEVEL A LEVEL B

AutoCAD SHX Text 93.183

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text 93.183

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 1 OF 7

AutoCAD SHX Text

S. PEELER S. PEELER S. MERRILL N. CORONADO

AutoCAD SHX Text

1440-01-501-1539 AH

AutoCAD SHX Text 3037-1050-92

AutoCAD SHX Text

DOOR, LAUNCHER, PERSONNEL ACCESS

AutoCAD SHX Text F00-957-4632

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text K

AutoCAD SHX Text 64295

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

LTR

AutoCAD SHX Text

DATE

AutoCAD SHX Text

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

AutoCAD SHX Text

SERVICEABLE METHOD: 20

AutoCAD SHX Text

C) NOT FOR OUTSIDE STORAGE

AutoCAD SHX Text K

AutoCAD SHX Text

UPDATED OD DIMENSIONS AND HOLE DIMENSION ON DETAIL B

AutoCAD SHX Text 19135

AutoCAD SHX Text

D) TO OPEN, REMOVE LAG BOLTS FROM END AND

AutoCAD SHX Text

E) CAUTION: LIFT BY BASE ONLY

AutoCAD SHX Text

F) DO NOT STACK

AutoCAD SHX Text

AROUND BASE

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text 36 8 8 4 6 8 8 8 6 2 3 4 2 4

AutoCAD SHX Text WASHER, PLAIN LOCKNUT, HEX WASHER, PLAIN TIE-DOWN ROD BOLT, CARRIAGE BOLT, CARRIAGE BOLT, CARRIAGE BOLT, CARRIAGE BOLT, CARRIAGE BLOCKING FLOOR BOARD MEMBER, LOAD BEARING END TIE SKID

AutoCAD SHX Text 3/8 1 1 56 X 1 5 X 3/8 7 1/2 X 3/8 9 1/2 X 3/8 7 X 3/8 9 X 3/8 4 X 4 (NOM) X 18 2 X 8 (NOM) X 48 1/2 4 X 6 (NOM) X 48 1/2 4 X 6 (NOM) X 48 1/2 4 X 6 (NOM) X 53 1/2

AutoCAD SHX Text ASME B18.21.1 ASME B18.16.6 ASME B18.21.1 NSN 9510-00-287-9402 ASME B18.5 ASME B18.5 ASME B18.5 ASME B18.5 ASME B18.5 ASTM D6199 CLASS 2 ASTM D6199 CLASS 2 ASTM D6199 CLASS 2 ASTM D6199 CLASS 2 ASTM D6199 CLASS 2

AutoCAD SHX Text -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 2 OF 7

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text 30 30 1 2 A/R 1 A/R 6 2 2 36

AutoCAD SHX Text WASHER, PLAIN BOLT, LAG LAG STRIP, TOP LAG STRIP, SIDE TAPE, FILAMENT SHROUD BARRIER WRAP CUSHIONING SPREADER ANGLE, STRUCTURAL NUT, HEX

AutoCAD SHX Text 1/4 2 1/2 X 1/4 2 X 2 (NOM) X 48 2 X 2 (NOM) X 43 1 X AS REQUIRED AS REQUIRED AS REQUIRED 3 X 1/4 X AS REQUIRED 18 X 3 X 1/4 46 X 3 X 3 X 1/4 3/8

AutoCAD SHX Text ASME B18.21.1 ASTM D6199 CLASS 2 ASTM D6199 CLASS 2 ASTM D6199 CLASS 2 ASTM D5330 TYPE I OR II A-A-3174 TYPE I, CLASS 1, GRADE A, FIN 1 MIL-PRF-121 TYPE I MIL-PRF-6855 NSN 9510-00-231-2082 NSN 9520-00-954-5666 ASME B18.2.2

AutoCAD SHX Text -25 -24 -23 -22 -21 -20 -19 -18 -17 -16

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text F00-957-4632

DOOR, LAUNCHER, PERSONNEL ACCESS

CAUTION NOTICES

NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE

REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED. BASE MUST BE COVERED WITH CONTAINER.

NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 4: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE

CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION STRATEGIC AND THEATER

DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY

SUSCEPTIBLE TO DAMAGE DUE TO UNKOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS.

PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.

NOTES

1. SECURE CUSHIONING, REF.-18, TO BASE USING 3d NAILS CONFORMING TO ASTM F1667.

2. COMPLETELY COVER PRESERVED ITEM WITH BARRIER, REF.-19 AND SECURE WITH TAPE, REF.-21. THEN SHROUD ITEM

USING REF.-20.

3. CUSHIONING, REF.-18 SHALL BE PLACED BETWEEN STRUCTURAL ANGLES, REF.-16 AND ITEM AS ILLUSTRATED ON PAGE 6.

4. DRILL HOLES TO COUNTERSINK NUTS. WASHERS, AND BOLTS, REF. -7, -10, -12, -13, -14 AND -15.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 3 OF 7

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F00-957-4632

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 4 OF 7

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text -16

AutoCAD SHX Text -17

AutoCAD SHX Text

DRILL 1 1/8 HOLE

AutoCAD SHX Text

(TYP)

AutoCAD SHX Text

1 1/2 (TYP)

AutoCAD SHX Text

1 (TYP)

AutoCAD SHX Text

DETAIL A

AutoCAD SHX Text F00-957-4632

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 5 OF 7

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F00-957-4632

AutoCAD SHX Text

DOOR, LAUNCHER, PERSONNEL ACCESS

AutoCAD SHX Text 51 12

AutoCAD SHX Text 44 12

AutoCAD SHX Text

3/8 DIA. HOLES 22 PLCS.

AutoCAD SHX Text

1 1/16" DIA. HOLES 4 PLCS. TYP. COUNTERSINK UNDERSIDE OF SKIDS 4 PLCS.

AutoCAD SHX Text

COUNTERSINK AND 3/8 DIA. HOLES 14 PLCS.

AutoCAD SHX Text

DETAIL B

BASE-TOP VIEW

ITEM REFERENCE

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 6 OF 7

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text -18

AutoCAD SHX Text -17

AutoCAD SHX Text -16

AutoCAD SHX Text -11

AutoCAD SHX Text -21

AutoCAD SHX Text -13

AutoCAD SHX Text -19

AutoCAD SHX Text -21

AutoCAD SHX Text -20

AutoCAD SHX Text -18

AutoCAD SHX Text -5

AutoCAD SHX Text -3

AutoCAD SHX Text -15

AutoCAD SHX Text -2

AutoCAD SHX Text -1

AutoCAD SHX Text -8

AutoCAD SHX Text -12

AutoCAD SHX Text -13

AutoCAD SHX Text -7

AutoCAD SHX Text -6

AutoCAD SHX Text -4

AutoCAD SHX Text -10

AutoCAD SHX Text -9

AutoCAD SHX Text -14

AutoCAD SHX Text F00-957-4632

AutoCAD SHX Text

DOOR, LAUNCHER, PERSONNEL ACCESS

AutoCAD SHX Text A

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 7 OF 7

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

AutoCAD SHX Text -23

AutoCAD SHX Text -22

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text

12 MAX

AutoCAD SHX Text -25

AutoCAD SHX Text -24

AutoCAD SHX Text F00-957-4632

File details come from the government source that posted it. Updated Feb 4, 2026.