SPI.pdf
PDF 835 KB Posted
- Attached to
- RADOME, NSN: 1560011798343 (26-R-0205)
- Solicitation number
- SPRHA4-26-R-0205
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document that specifies packaging and handling requirements for a RADOME item (National Stock Number 1560-01-202-9088 WF, Part Number BD042B001-149).
The document establishes two packaging levels compliant with Military Preservation IAW MIL-STD-2073-1. Level A packaging utilizes ASTM D6256 (MDD) specification and provides gross cubic footage of 94.173 and gross weight of 350 lbs, with Level B packaging using ASTM D6256 (MDD) offering 94.121 cubic footage and 350 lbs weight. Container dimensions are specified as 44" length by 34" width by 92" depth for both levels, with center-to-center dimensions of 46 1/4" by 36 1/4" by 97 1/8" for Level A and identical dimensions for Level B. The document references ASTM D6256 for closure specifications and includes detailed bill of materials containing 28 line items including lag bolts, filament tape, bags, lag strips, supports, bolts, carriers, washers, headers, and spacers. Cleaning and drying requirements follow IAW MIL-STD-2073-1. Marking must conform to MIL-STD-129, with special instructions to mark the SPI number (F01-041-0480) on the identification side of the container and preserve reusable containers. The document includes comprehensive assembly drawings and details across eight sheets, compliance requirements for wood packaging material per ISPM No. 15 international phytosanitary standards, and three assembly notes regarding radome positioning, eye bolt placement, and spacer material alternatives.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| EDR.pdf | ||
| StatementOfWork.pdf | ||
| SPRHA4-26-R-0205 CUI.pdf | ||
| EDL.pdf | ||
| MQR.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
CUI
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. POSITION RADOME SO THAT THE 4 HOLES ON RADOME WILL MATCH THE HOLES ON HOLD DOWN BASE, -9 AND -10.
SECURE WITH BOLT, -13 AT BOTTOM AND WITH TOP SUPPORT, REF.-19, AND TOP RELEASE, REF.-22.
2. PLACE EYE BOLTS IN BAG, REF.-26 AND SECURE TO SUPPORT, REF.-22.
3. ALTERNATE MATERIAL FOR SPACER, REF.-11, MAY BE 13 EACH 3/8 INCH WASHERS CONFORMING TO ASME B18.21.1
WHEN NEEDED.
File details come from the government source that posted it. Updated .