SPI.pdf
PDF 131 KB Posted
- Attached to
- CIRCUIT CARD ASSEMB
- Solicitation number
- SPRDL125Q0063
About this file
This is a Special Packaging Instruction (SPI) document for a Component Board Assembly, 28V (Part/Drawing No. 13012999) with National Stock Number 5998-01-587-1812. The document provides detailed packaging requirements for military preservation Method 41 per MIL-STD-2073-1.
The item requires specific packaging dimensions of 12.0 x 10.0 x 5.0 inches for the unit pack, with a unit pack weight of 4.8 lbs and cubic volume of 0.348 cubic feet. The component itself measures 6.3 x 5.7 x 2.8 inches and weighs 3.3 lbs. The document specifies Level A and B packing requirements per MIL-STD-2073-1, marking requirements per MIL-STD-129, and references Drawing 9370051 for detailed preservation, packaging, and marking instructions. All cleaning and drying procedures must follow paragraph 5.2.1 of MIL-STD-2073-1 unless otherwise specified.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL125Q0063-0003.pdf | ||
| SPRDL125Q0063-0002.pdf | ||
| SPRDL125Q0063-0001.pdf | ||
| SPRDL125Q0063.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page 1 of 1 Page(s)
0BSPECIAL PACKAGING INSTRUCTION
1. PART OR DRAWING NO. NOMENCLATURE 2. CAGE 3. SPI NO.
13012999 COMPONENT BOARD ASSEMBLY, 28V 19200 AM13012999
4. NATIONAL STOCK NO. 5.DATE OF DRAWING/SPI (YYMMDD) 6. REVISION / ERR NO.
5998-01-587-1812 241118 A / L24K2291
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU. FT.)(0.000) 11. UNIT PACK SIZE (INCHES)(00.0)
1/EA - 4.8 0.348 12.0 X 10.0 X 5.0
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 1 SEE DRAWING 9370051 FOR DETAILS
MIL-STD-2073-1, METHOD 41
13. CLEANING
14. DRYING
15. PACKING
a. LEVEL A
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREON OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY.
INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH SPECIFICATION MIL-STD-2073-1 OR AS
OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. INSPECTIONS, QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH APPENDIX G OF MIL-STD-2073-1, OR AS OTHERWISE
SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-STD- 2073-1.
A. ALL LEVELS OF PRESERVATION, PACKAGING AND MARKING SHALL BE IN ACCORDANCE WITH DRAWING 9370051.
WSC: JE ITEM SIZE: 6.3 X 5.7 X 2.8 ITEM WEIGHT: 3.3 APPROVED: J. VAN DERVEER
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
SPECIAL PACKAGING INSTRUCTION
File details come from the government source that posted it. Updated .