SPI-AM12999115.pdf
PDF 91 KB Posted
- Attached to
- KIT, MVRS ANTENNA WITH CONTAINER Federal contract opportunity
- Solicitation number
- SPRDL1-26-R-0047
About this file
This is a Special Packaging Instruction form (DD Form 2169) that specifies packaging requirements for a military supply item.
The document provides detailed packaging specifications for the Kit, MVRS Antenna with Container (Part Number 12999115, National Stock Number 5895-01-524-8674). The kit consists of two components: the MVRS Antenna (Part Number 12999104) and the Shipping & Storage Container, MVRS (Part Number 12999116). The unit pack weighs 50.0 pounds with dimensions of 15.0 x 15.0 x 9.9 inches and a cubic measurement of 1.289 cubic feet. Military preservation requires the item be placed in a bag conforming to MIL-DTL-117 Type I, Class E, using MIL-STD-2073-1 Method 41. Packing shall follow Level A and Level B requirements of MIL-STD-2073-1, with marking per MIL-STD-129. The assembly instruction specifies that the bagged MVRS Antenna (12999104) must be placed into the Shipping & Storage Container (12999116), properly oriented to ensure a tight pack, with all container latches closed and secured. Cleaning and drying shall conform to paragraph 5.2.1 of MIL-STD-2073-1 unless otherwise specified. The form was approved by Jeffrey Van Derveer, with an item size of 7.7 x 7.4 x 3.4 inches and item weight of 38.5 pounds. Distribution is approved for public release with unlimited distribution.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL126R0047.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information
Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12999115 KIT, MVRS ANTENNA WITH CONTAINER 19200 AM12999115
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
5895-01-524-8674 210419 A / H20P2001
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1 KIT 50.0 1.289 15.0 X 15.0 X 9.9
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 1 BAG: MIL-DTL-117 TYPE I, CLASS E (SEE NOTE A)
MIL-STD-2073-1, METHOD 41
13. CLEANING
14. DRYING
15. PACKING
a. LEVEL A
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-
STD-2073-1.
KIT CONSISTS OF THE FOLLOWING:
QUANTITY PART NUMBER DESCRIPTION
1 12999104 MVRS ANTENNA
1 12999116 SHIPPING & STORAGE CONTAINER, MVRS
TABLE 1 – KIT CONTENTS
A. PLACE BAGGED ITEM [12999104] – MVRS ANTENNA INTO [12999116] SHIPPING & STORAGE CONTAINER, MVRS.
ENSURE ITEM IS PROPERLY ORIENTED IN THE CONTAINER TO PROVIDE A TIGHT PACK. SEAL CONTAINER BY
CLOSING AND SECURING ALL LATCHES.
WSC: KF ITEM SIZE: 7.7 x 7.4 x 3.4 ITEM WEIGHT: 38.5 APPROVED: JEFFREY VAN DERVEER DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 1 Pages
File details come from the government source that posted it. Updated .