SPI AK98371858.pdf

PDF 808 KB Posted Jan 30, 2025

Attached to: Manifold Assembly, H
Solicitation number: SPRDL1-24-R-0196
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Jan 30, 2025

This is a Special Packaging Instruction (SPI) document detailing the precise packaging requirements for a Manifold Assembly, Hydraulic (NSN: 4730-99-837-1858, P/N: KP00741). The document specifies packaging instructions for a unit consisting of 12 segregated pack numbers divided into 4 sub-kits: three KP00158 kits and one CS2014 kit. Each sub-kit contains specific components including screws, washers, O-rings, function block assemblies, and a three-station base assembly.

The document provides detailed step-by-step instructions for preservation, packaging, cushioning, and consolidation of components, with specific military specifications for bags, wrapping materials, containers, and cushioning materials. All components must be packaged according to MIL-STD-2073-1D criteria, with preservation methods ranging from Method 10 to Method 42. The final package requires ASTM-D6251 Type III shipping container measuring 29 x 25 x 10 inches. This SPI corresponds to a sole-source procurement from Pearson Engineering Limited (CAGE: K0824) for 12 units plus 100% option, as referenced in solicitation SPRDL1-24-R-0196 from Defense Logistics Agency Land and Maritime.

View the file

Other files

File	Type	Posted
SPRDL1-24-R-0196.pdf	PDF	Jan 30, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 13 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved

OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

.KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

001 NONE 152.0 7.813 31.3 X 27.3 X 15.8

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 42

13. CLEANING 1-B A/R KIT CONTENTS (PG 1)

MIL-STD-2073-1 2-C A/R SEGREGATED PACKS 1 - 4 PREPERATION (PG 2)

14. DRYING 3-D A/R SEGREGATED PACK 1 - 4 CONSOLIDATION (PG 3)

MIL-STD-2073-1 4-E A/R SEGREGATED PACKS 5 - 9 PREPERATION (PG 7)

15. PACKING

5-F A/R SEGREGATED PACK 5 - 9 CONSOLIDATION (PG 8)

6-G A/R CONSOLIDATION SHIPPING CONTAINER (PG 13)

a. LEVEL A

MIL-STD-2073-1 & NOTE I

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 & NOTE H

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC CONSISTS OF THE FOLLOWING ITEMS:

SEGREGATED

PACK

NUMBER

QUANTITY

PER SUB

KIT

TOTAL

QUANTITY

KP00741

PART NUMBER CAGE ITEM DESCRIPTION

REFERENCE ONLY 3 KP00158 K0824 KP00158 CONTAINS SPN'S 1 - 4

1 4 12 ND9149 K0824 SCREW, CAP, SOCKET HEAD

2 4 12 ND2353 K0824 WASHER, LOCK

3 4 12 ND9363 K0824 O-RING

4 1 3 CS2015 K0824 FUNCTION BLOCK ASSEMBLY, TYPE 3

REFERENCE ONLY 1 CS2014 K0824 CS2014 CONTAINS SPN'S 5 - 9

5 2 2 ND10243 K0824 SCREW, CAP, SOCKET HEAD

6 2 2 ND10244 K0824 SCREW, CAP, SOCKET HEAD

7 4 4 98023A030 39428 WASHER, FLAT

8 4 4 91104A030 39428 WASHER, LOCK

9 1 1 CS2016 K0824 THREE STATION BASE ASSEMBLY

NOTE: KP00741 CONSISTS OF 12 SEGREGATED PACK NUMBERS. THESE SEGREGATED PACK NUMBERS WILL

BE PACKAGED INTO 4 SUB KITS; KP00158 (QTY:3) AND CS2014 (QTY:1)

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

KP00158 KP00158 KP00158 CS2014

C. PREPARE SEGREGATED PACK NUMBERS 1 - 4 (SUB KIT KP00158, QUANTITY: 3) AS FOLLOWS:

NOTE: THERE ARE THREE INDIVIDUAL SUB KITS KP00158, PACKAGE EACH SEPERATELY AS

FOLLOWS

SPN 1, PART NUMBER ND9149, SCREW, CAP, SOCKET HEAD, QUANTITY 4.

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 5 X 8, CLOSE BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 1”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 10.

SPN 2, PART NUMBER ND2353, WASHER, LOCK, QUANTITY 4.

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 5, CLOSE BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 2”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 10.

SPN 3, PART NUMBER ND9363, O-RING, QUANTITY 4.

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 5, CLOSE BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 3”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 10.

SPN 4, PART NUMBER CS2015, FUNCTION BLOCK ASSEMBLY, TYPE 3, QUANTITY 1.

1. PRESERVATION: FILL WITH OPERATIONAL FLUID.

2. CAPS/PLUGS: NAS-847. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF

APPROPRIATE SIZE.

SPN

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collect ion of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

3. WRAP: MIL-PRF-121, TY II, SIZE: 16 X 24. WRAP ITEM IN GREASE PAPER SECURE WITH TAPE

ASTM-D6123.

4. IDENTIFICATION: IDENTIFY ITEM AS "SEGREGATED PACK NUMBER 4".

5. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 20.

D. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTE C AS FOLLOWS:

1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 275, VR SW, SIZE: 11-1/4 X 9-1/4 X 6-3/4.

2. CUSHIONING: A-A-59136, CL 1, GR A, SEE TABLE BELOW FOR SIZES. PLACE CUSHIONING IN

CONTAINER AS PICTURED ON PAGES 4 - 6.

3. ITEM PLACEMENT: PLACE SEGREGATED PACKS AS PICTURED ON PAGES 4 - 6.

4. CLOSURE: CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

5. BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 20 X 22.

6. WRAP: MIL-PRF-121, TY II, SIZE: 24 X 36. WRAP BAGGED CARTON AND SECURE WITH TAPE

ASTM-D6123.

7. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 41.

NOTE: REPEAT STEPS IN NOTE C AND D FOR SECOND AND THIRD SUB KIT KP00158

CUSHIONING MATERIALS FOR SUB KIT KP00158

ITEM SIZE QTY MIL SPEC REFERENCE

A 8-3/4 X 4-3/4 X 2" THICKNESS 3 A-A-59136, CL 1, GR A, 2.0# DENSITY

B 6 X 4-3/4 X 1" THICKNESS 3 A-A-59136, CL 1, GR A, 2.0# DENSITY

C 9-1/4 X 4-3/4 X 1" THICKNESS 6 A-A-59136, CL 1, GR A, 2.0# DENSITY

D 9-1/4 X 11-1/4 X 1" THICKNESS 3 A-A-59136, CL 1, GR A, 2.0# DENSITY

E 9-1/4 X 4 X 1" THICKNESS 6 A-A-59136, CL 1, GR A, 2.0# DENSITY

F 9-1/4 X 11-1/4 X 1/4" THICKNESS 3 A-A-59135, CL 1, GR A

KP00158 PACKAGING STEPS AND PICTURES ARE SHOWN ON PAGES 4 - 6

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

STEP 1 - PLACE ITEM E ON BOTTOM OF CONTAINER AS SHOWN BELOW

STEP 2 - PLACE SEGREGATED PACK NUMBERS 1 - 3 AS SHOWN BELOW

STEP 3 - PLACE ITEM F ON TOP OF ITEM E AS SHOWN BELOW

SEGREGATED PACK

NUMBERS 1 - 3

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

STEP 4 - PLACE ITEMS C AND B AS SHOWN BELOW

STEP 5 - PLACE SEGREGATED PACK NUMBER 4 AS SHOWN BELOW

STEP 6 - PLACE ITEM A AS SHOWN BELOW

ITEM SHOWN WITHOUT WRAP

FOR CLARITY

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

STEP 7 - PLACE ITEM D AS SHOWN BELOW

STEP 7 - CLOSE DOMESTIC CARTON, FLATTEN ALL CORNERS, BAG AND WRAP IN PAPER

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 7 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

E. PREPARE SEGREGATED PACK NUMBERS 5 - 9 (SUB KIT CS2014, QUANTITY: 1) AS FOLLOWS:

SPN 5, PART NUMBER ND10243, SCREW, CAP, SOCKET HEAD, QUANTITY 2.

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 5 X 8, CLOSE BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 5”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 10.

SPN 6, PART NUMBER ND10244, SCREW, CAP, SOCKET HEAD, QUANTITY 2.

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 5 X 8, CLOSE BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 6”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 10.

SPN 7, PART NUMBER 98023A030, WASHER, FLAT, QUANTITY 4.

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 5, CLOSE BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 7”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 10.

SPN 8, PART NUMBER 91104A030, WASHER, LOCK, QUANTITY 4.

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 5, CLOSE BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 8”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 10.

SPN 9, PART NUMBER CS2016, THREE STATION BASE ASSEMBLY, QUANTITY 1.

1. PRESERVATION: FILL WITH OPERATIONAL FLUID.

2. CAPS/PLUGS: NAS-847. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF

APPROPRIATE SIZE.

3. IDENTIFICATION: IDENTIFY ITEM AS "SEGREGATED PACK NUMBER 9".

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 20.

F. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTE E AS FOLLOWS:

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 8 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

1. CONTAINER: ASTM-D5118, TY CF, ST FOL, CL D, GR 275, VR SW, SIZE: 24 X 15-1/2 X 7-1/4.

2. BLOCKING/BRACING: A-A-55057, TY A, SIZE: 21 X 12-1/2 X 1/2 (SEE PAGE 9).

3. WRAP: MIL-PRF-121, TY II, SIZE: 28 X 28 (SEE PAGE 10).

4. CUSHIONING: A-A-59136, CL 1, GR A, SEE TABLE BELOW FOR SIZES. PLACE CUSHIONING IN

CONTAINER AS PICTURED ON PAGES 9 - 13.

5. ITEM PLACEMENT: PLACE SEGREGATED PACKS AS PICTURED ON PAGES 9 - 13.

6. CLOSURE: CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

7. BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 30 X 38.

8. WRAP: MIL-PRF-121, TY II, SIZE: 36 X 50. WRAP BAGGED CARTON AND SECURE WITH TAPE

ASTM-D6123.

9. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 41.

PACKAGING MATERIALS FOR SUB KIT CS2014

ITEM SIZE QTY REFERENCE

A 24 X 15-1/2 X 2" THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

B 4-1/2 X 15-1/2 X 2" THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

C 21 X 12-1/2 X 1/2" THICKNESS 1 A-A-55057, TY A

D 3/8 X 5 HARDWARE 4

HARDWARE CONSISTS OF: 1PC 1/2X5 CARRIAGE

BOLT, 1PC 1/2 FLAT WASHER, 1PC 1/2 LOCK

WASHER AND 1PC 1/2 NUT

CS2014 PACKAGING STEPS AND PICTURES ARE SHOWN ON PAGES 9 - 13

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 9 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

STEP 1 - DRILL HOLES IN PLYWOOD (ITEM C) AS PICTURED BELOW

1199--33//44 44--11//88

11--11//88

1100--55//1166

1122--11//22

33//88 DDIIAAMMEETTEERR

HHOOLLEESS

44 PPLLAACCEESS

STEP 2 - POSITION PLYWOOD (ITEM C) ON CUSHIONING (ITEM A) AS PICTURED BELOW

(BOTTOM VIEW)

1155--11//22

11--11//22

AA CC

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 10 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

STEP 3 - INSERT 3/8 X 5 CARRIGE BOLTS (HARDWARE ITEM D) INTO PLYWOOD (ITEM C) AND PUSH THROUGH

CUSHIONING (ITEM A) AS PICTURED BELOW

(TOP VIEW)

STEP 4 - POSITION WRAP (MIL-PRF-121, NOTE D, PAGE 1) ON CUSHIONING (ITEM A) PUSH 3/8 CARRIAGE

BOLT (HARDWARE ITEM D) THROUGH WRAP AS PICTURED BELOW

(TOP VIEW)

ITEM C

BELOW ITEM A

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 11 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

STEP 5 - PLACE ITEM ON CARRIAGE BOLTS (ITEM D) AS PICTURED BELOW

(TOP VIEW)

STEP 6 - SECURE ITEM USING 1/2" FLAT WASHER, 1/2" LOCK WASHER AND 1/2" NUT (ITEM D) AS PICTURED

BELOW. HAND TIGHTEN HARDWARE

(TOP VIEW)

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 12 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

STEP 7 - WRAP EXCESS PAPER UP AND AROUND ITEM, SECURE WITH TAPE ASTM-D6123 AS PICTURED

BELOW (TOP VIEW)

STEP 8 - PLACE ASSEMBLY IN DOMESTIC CARTON AND PLACE CUSHIONING (ITEM B) AS PICTURED BELOW

(TOP VIEW)

BB BB

PLACE SEGREGATED PACK

NUMBERS 5 - 8

SEGREGATED PACK NUMBER 9

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 13 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

KP00741 (K0824) MANIFOLD ASSEMBLY, HYDRAULIC 19207 AK98371858

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4730-99-837-1858 10 OCT 2024

17. NOTES/DRAWING

STEP 9 - CLOSE DOMESTIC CARTON, FLATTEN ALL CORNERS, BAG (MIL-DTL-117, TY I, CL E, ST 1) AND WRAP

IN PAPER.

G. CONSOLIDATION:CONSOLIDATE ITEMS FROM NOTES D AND F AS FOLLOWS:

1. CONTAINER: ASTM-D6251, TY III, CL 2, ST A, SIZE: 29 X 25 X 10.

2. ITEM PLACEMENT: SEE PICTURE BELOW FOR ITEM PLACEMENT.

3. CLOSURE: CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION ASTM-

D6251.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR

PRESERVATION METHOD 10.

H. PACKING LISTS: PROVIDE PACKING LISTS IN ACCORDANCE WITH MIL-STD-129 AND AS IDENTIFIED

WITHIN NOTE “B” OF THIS INSTRUCTION.

I. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

KP00158 (SPN 1 - 4)

CS2014 (SPN 5 - 9)

File details come from the government source that posted it. Updated Jan 30, 2025.