SPI AK17004780 REV A.pdf
PDF 660 KB Posted
- Attached to
- Fire Extinguisher Federal contract opportunity
- Solicitation number
- SPRDL1-23-R-0010
About this file
This special packaging instruction document provides specifications for packaging a fire extinguisher under National Stock Number 4210-01-700-4780. The packaging must include specific foam pads of defined sizes and materials to cushion the fire extinguisher within the container. Top and bottom foam assemblies are constructed as illustrated and secured with tape. Hazardous material markings and labeling are required. The container must be a triple wall corrugated fiberboard box meeting certain standards for closure, sealing and reinforcement. When packaged quantities exceed 125 pounds, exterior packs must be palletized in accordance with standard requirements.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL123R0010-0001.pdf | ||
| SPRDL1-23-R-0010 SAM.Gov Solicitation.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
0BSPECIAL PACKAGING INSTRUCTION
Form Approved
OMB No. 0704-0188
-BM
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED
FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
711053 (66558) EXTINGUISHER , FIRE 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
11 APR 2022
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 31.0
2.242 21.9 X 13.3 X 13.3
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 10
13. CLEANING 1-D CUSHIONING: MIL-PRF-26514, TYPE I, CLASS 2,
MIL-STD-2073-1 GRADE B
14. DRYING
MIL-STD-2073-1 2-D CUSHIONING: A-A-59136, CL 1, GR A , TYPE I, (SKIVED)
15. PACKING 3-D ADHESIVE: A-A-59692 OR SUITAB;E GRADE OF
a. LEVEL A COMMERCIAL ADHESIVE
MIL-STD-2073-1 & NOTE H
b. LEVEL B 4-E CAPS: NAS 847
MIL-STD-2073-1 & NOTE H
16. MARKING 5-F 1 CONTAINER: ASTM D5118, ST RSC, TY CF , CL WR,
MIL-STD-129 AND NOTES C & G VAR SW, GR W5C, SIZE: 12-3/4 X 12-3/4 X 21-1/8
17. NOTES/DRAWING
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER
SPECIFICATION.
B. NOTE B IS NOT USED.
C. DANGEROUS GOODS (HAZMAT):
1. REQUIREMENTS – ALL PACKAGING, MARKING, LABELING AND DECLARATION PAPERWORK
ASSOCIATED SHIPMENTS CONTAINING REGULATED DANGEROUS GOODS (HAZMAT) SHALL BE
GENERATED AND SIGNED BY A QUALIFIED INDIVIDUAL OR THEIR DELEGATE. PROOF OF CERTIFICATION
MAY BE REQUIRED.
2. PREPARE ITEM AS REQUIRED BY MIL-STD-129 AND THE HAZARDOUS MATERIALS REGULATION FOR THE APPLICABLE MODE OF TRANSPORTIOAN. APPLY HAZAROUS MATERIAL MARKINGS TO THE EXTERIOR OF SHPPING CONTAINER AND INTERNAL CONTAINERS AS REQUIRED INCLUDING PROPER SHIPPING NAME, UN NUMBER, AND HAZARD LABEL. REFER TO THE CODE OF FEDERAL REGULATIONS (CFR), TITLE 49, THE INTERNALTIONAL MARTIME DANGEROUS GOODS (IMDG) CODE, THE INTERNATIONAL AIR
TRANSPORT ASSOCIATION (IATA) DANGEROUS GOODS REGULATIONS, AND/OR THE JOINT SERVICE MANUAL, AFJMAN24-204/ TM38-250/NAVSUP PUB 505/MCO P4030. 19F/DLAM 4145.3, PREPARING
HAZARDOUS MATERIALS FOR MILTARY AIR SHIPMENTS.
3. FIRE EXTINGUSHER IS EXEMPT FROM POP TESTING.
4. TECHNICAL INFORMATION:
A. UN1044, COMPRESSED GAS, N.O.S. (HEPTAFLUOROPROPANE, PRESSURIZED WITH NITROGEN) , CLASS 2.2, 3.6 KG (8.0 LB)
D. FOR FABRICATION AND PLACEMENT OF CUSHIONING, SEE ILLUSTRATION PAGES 2-7. USE ADHESIVE
TO SECURE PADS TOGETHER.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 7 Pages
AK17004780
A 4210-01-700-4780
1BSPECIAL PACKAGING INSTRUCTION
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED
FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
711053 (66558) EXTINGUISHER , FIRE 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
11 APR 2022
17. NOTES/DRAWING
PAD
NO. DESCRIPTION ACTUAL SIZE QTY
A FOAM PAD: MIL-PRF-26514 8-1/2 X 8-1/2 X 1 2
B FOAM PAD: MIL-PRF-26514 8-1/2 X 8-1/2 X 2 2
C FOAM PAD; A-A-59136, CL 1, GR A , TYPE I 8-1/2 X 8-1/2 X 2 3
D FOAM PAD; A-A-59136, CL 1, GR A , TYPE I 21 x 8-5/8 x 2 2 E FOAM PAD; A-A-59136, CL 1, GR A , TYPE I 21 x 12-5/8 x 2 2
PLACE TOP AND BOTTOM CAPS ON FIRE EXTINGUISHER AS SHOWN ON PAGE 7. PLACE PADS “D” AND “E” AROUND FIRE EXTINGUISHER AS SHOWN ON PAGE 7. SECURE PADS IN PLACE USING TAPE. PLACE
CUSHIONED FIRE EXTINUISHER INTO CARTON.
E. APPLY CAPS OR PLUGS AS REQUIRED.
F. CONTAINER CLOSURE SHALL BE IN ACCORDANCE WITH CLOSURE 2B6 OF ASTM D1974.
G.MARKING INCLUDES, BUT IS NOT LIMITED TO, ORIENTATION ARROWS, “THIS END UP” AND “DO NOT
DROP” (SEE PAGE 7 FOR ORIENTATION).
H. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING CLEATED-PLYWOOD BOXES, OVERSEAS TYPE, CONFORMING TO ASTM D6251.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBEBOARD BOXES, WEATHER RESISTANT
CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES,
CONFORMING TO CLASS CGWR OF ASTM D5168 OR PLLET BASE CONTAINERS, TYPE III, CONFORMING TO MIL-B-43666. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL- STD-147.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 7 Pages
2BSPECIAL PACKAGING INSTRUCTION
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED
FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
711053 (66558) EXTINGUISHER , FIRE 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
11 APR 2022
17. NOTES/DRAWING
BOTTOM FOAM
A- 8-1/2 x 8-1/2 Polyurethane (QTY 1) MIL-PRF-26514, TYPE I, CLASS 2, GRADE B B- 8-1/2 x 8-1/2 Polyurethane (QTY 2)
MIL-PRF-26514, TYPE I, CLASS 2, GRADE B
BOTTOM FOAM ASSEMBLY
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 7 Pages
SPECIAL PACKAGING INSTRUCTION
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED
FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
711053 (66558) EXTINGUISHER , FIRE 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
11 APR 2022
17. NOTES/DRAWING
TOP FOAM
A- 8-1/2 x 8-1/2 Polyurethane (QTY 1) MIL-PRF-26514, TYPE I, CLASS 2, GRADE B C - 8-1/2 x 8-1/2 (QTY 3)
A-A-59136, CL 1, GR A , TYPE I
TOP FOAM ASSEMBLY
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 7 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED
FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
711053 (66558) EXTINGUISHER , FIRE 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
11 APR 2022
17. NOTES/DRAWING
BOTTOM FOAM
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 7 Pages
HOLE IS CENTERED ON CUSHIONING PAD
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED
FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
711053 (66558) EXTINGUISHER , FIRE 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
11 APR 2022
17. NOTES/DRAWING
TOP FOAM
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 7 Pages
HOLE IS CENTERED ON CUSHIONING PAD
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED
FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
711053 (66558) EXTINGUISHER , FIRE 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
11 APR 2022
17. NOTES/DRAWING
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 7 of 7 Pages
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION |
File details come from the government source that posted it. Updated .