SPI AK16998560 REV A.pdf
PDF 298 KB Posted
- Attached to
- Distributing System Federal contract opportunity
- Solicitation number
- SPRDL1-23-R-0003
About this file
This document provides special packaging instructions for a three-phase power supply to be procured under solicitation number SPRDL1-23-R-0003 issued by the Defense Logistics Agency Land and Maritime. The power supply, identified as National Stock Number 19207 and Commercial and Government Entity code .9133-01, is to be wrapped in MIL-PRF-121, Type II material and cushioned with pads fabricated in accordance with MIL-DTL-59136 before placement in an ASTM D5118 standard corrugated fiberboard container. The container is then to be inserted in a MIL-DTL-117 Type I water vapor proof bag, wrapped with A-A-59135 cushioning, and secured within an ASTM D6880 exterior shipping container fitted with skids per the standard. Marking and preservation of the unit pack are specified in accordance with MIL-STD-129 and MIL-STD-2073-1 respectively, including a Level A barrier and Level B protective wrap. Quality assurance inspection and testing requirements are also outlined.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL1-23-R-0003 SAM.Gov Solicitation.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BM
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
.9133-01 (05ZM0) POWER SUPPLY, THREE PHASE 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
04 APR 2022
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 152.0 12.182 32.0 X 26.0 X 25.3
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 42
13. CLEANING 1-B 1 WRAP: MIL-PRF-121, TY II, SIZE 38 X 64
MIL-STD-2073-1 2-C CUSHIONING: SEE NOTES
14. DRYING 3-D 1 CONTAINER: ASTM D5118, ST RSC, TY CF, CL DOM,
MIL-STD-2073-1 VAR DW, GR 350, SIZE: 27-1/2 x 21-1/2 x 17
15. PACKING
4-E 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 44 X 54
a. LEVEL A 5-F 1 WRAP: A-A-59135, CL 2, GR A, SIZE: 84 X 50 X 1/4
MIL-STD-2073-1 & NOTE H
b. LEVEL B 6-G 1 CONTAINER: ASTM D6880, CL 2, ST 2, NOT APPLICABLE SIZE: 29 x 23 x 19-1/2.
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1D.
2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. WRAP POWER SUPPLY. SECURE WRAP WITH TAPE.
C. FABRICATE PADS “A”, “B”, AND “C” IN ACCORDANCE WITH THE CHART BELOW.
PLACE ONE (1) PAD “C” INTO THE BOTTOM OF THE CARTON. PLACE PADS “A” AND PADS “B” INTO THE ENDS AND SIDES OF THE
CARTON. PLACE POWER SUPPLY INTO THE CARTON. PLACE ONE (1) PAD “C” ON TOP OF POWER SUPPLY.
D. CONTAINER CLOSURE SHALL BE IN ACCORDANCE WITH CLOSURE 2B6, OF ASTM D1974.
E. INSERT CARTON INTO WATERVAPORPROOF BAG. HEAT SEAL BAG CLOSED.
F. WRAP CARTON IN CUSHIONING. SECURE WRAP WITH TAPE.
G. THE CONTAINER IS CONTRUCTED OF 1-INCH NOMINAL LUMBER AND INCLUDES BEVELED SKIDS. SKIDS SHALL BE CONSTRUCTED
FROM NOMINAL 4 X 4 LUMBER IN ACCORDANCE WITH ASTM D6880.
H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
PAD
NO.
DESCRIPTION ACTUAL SIZE QTY COMMENTS
A A-A-59136, CL 1, GR A, TY I 17 X 12-3/4 X 2 2 ENDS
B A-A-59136, CL 1, GR A, TY I 27-1/4 X 12-3/4 X 2 2 SIDES
C A-A-59136, CL 1, GR A, TY I 27-1/4 X 21 X 2 2 TOP & BOTTOM
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
AK16998560
A6150-01-699-8560
File details come from the government source that posted it. Updated .