SPI AK16747196 .pdf
PDF 227 KB Posted
- Attached to
- Common Ethernet Switching
- Solicitation number
- SPRDL1-22-R-0086
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL122R0086-0006.pdf | ||
| SPRDL122R0086-0005.pdf | ||
| SPRDL122R0086-0004.pdf | ||
| SPRDL122R0086-0003.pdf | ||
| SPRDL122R0086-0002.pdf | ||
| SPRDL1-22-R-0086-0001 SAM Amendment 0001.pdf | ||
| SPRDL1-22-R-0086 SAM.Gov Solicitation.pdf | ||
| SPI AK16746776.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
57K7316 (19207) COMMON ETHERNET W/CONTAINER 19207 AK16747196
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
7025-01-674-7196 04/23/2019 -
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 21.0 1.254 15.1 X 15.1 X 9.5
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 54 1B 1 CONTAINER P/N: 19980-2701
13. CLEANING (DESIGN P/N: 19980-2700)
MIL-STD-2073-1
14. DRYING 2C 1 BAG: MIL-DTL-117, TYPE I, CLASS F, STYLE 1,
MIL-STD-2073-1 SIZE: 8 X 12
15. PACKING 3D 2 DESICCANT: MIL-D-3464, TYPE II
a. LEVEL A UNITS
MIL-STD-2073-1 AND NOTE H
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE G
17. NOTES / DRAWING
57K7316 CONSISTS OF: 1 EA. COMMON ETHERNET SWITCH, P/N: 12546260 AND 1 EA. REUSABLE
CONTAINER, P/N: 19980-2701
A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.
B. PACKAGING OF THIS ESD SENSITIVE ITEM MUST BE ACCOMPLISHED AT AN ESD PROTECTED AREA IN
ACCORDANCE WITH MIL-STD-1686.
C. THE BAG IS TO BE OF ONE PIECE CONSTRUCTION. DO NOT MECHANICALLY EVACUATE. PLACE PART IN
BAG AND CLOSE WITH TAPE.
D. OPEN ALL LATCHES ON THE CONTAINER AND REMOVE THE LID. OPEN THE LID OF THE INNER BOX. PLACE
THE BAGGED PART INTO THE INNER BOX AS SHOWN ON PAGE 2. CLOSE THE BOX.
E. PLACE 2 UNITS OF DESICCANT INTO THE SMALL RECTANGULAR CAVITY IN THE FRONT OF THE BASE FOAM.
F. REPLACE THE CONTAINER LID AND SECURE ALL LATCHES.
G. MARKING:
1. THE FOLLOWING FIELDS SHALL BE COMPLETED ON THE CONTAINER IDENTIFICATION PLATE:
a. ITEM WITH CONTAINER P/N
b. NOMENCLATURE
c. ITEM WITH CONTAINER NSN
d. CONTAINER P/N
2. ADDITIONAL MARKING SHALL HAVE THE SENSITIVE ELECTRONIC DEVICE SYMBOL AND THE ASSOCIATED
CAUTION LABEL EMPLOYED AS IT IS SPECIFED IN MIL-STD-129 ON THE UNIT PACK.
H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
I. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-1
AND THE APPLICABLE CONTAINER SPECIFICATION.
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
19980-2701 CONTAINER
(19980-2700 DESIGN)
12546260
PART POCKET FOR
DESICCANT
NOTE: BAG ON PART
IS NOT SHOWN
57K7316 ASSEMBLY
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
57K7316 (19207) COMMON ETHERNET W/CONTAINER 19207 AK16747196
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
7025-01-674-7196 04/23/2019 -
File details come from the government source that posted it. Updated .