SPI - AK15845302.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 11 ooff 33 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

AK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

9258608 (3PSD7) HOUSING, MECHANICAL 19207 AK15845302

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-584-5302 9/27/2010

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 679.0 16.225 33.0 X 29.5 X 28.8

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1D, METHOD 43

13. CLEANING 3-C 10 BLOCKING AND BRACING: ASTM-D6199

MIL-STD-2073-1E & NOTE B 4-D 1 BARRIER: MIL-PRF-121, TYPE II, SIZE: 30 X 30

14. DRYING 5-E 9 CUSHIONING: A-A59135, CLASS 1, GRADE A

MIL-STD-2073-1E & NOTE B SQ FT

15. PACKING

6-F 1 ENVELOPE: MIL-DTL-6060E, SIZE: 60 X 110

7-G 1 CONTAINER: ASTM-D6880, CLASS 2, STYLE 7

a. LEVEL A

SIZE: 30 X 28 X 23

MIL-STD-2073-1E & NOTE H

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 & NOTE I

17. NOTES/DRAWING

A. INSPECT PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1D AND THE

APPLICABLE CONTAINER SPECIFICATION.

B. CLEAN AND DRY ITEMS BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS

C. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING

TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO

ASTM-F1667, SEE PAGES 2 AND 3.

D. PLACE GREASE PAPER BETWEEN WOOD BLOCKING AND HOUSING.

E. DOUBLE WRAP HOUSING USING CUSHIONING A-A-59135, CL1, GR A, THICKNESS ¼” (APPROX 9 SQUARE

FEET), SECURE WITH TAPE ASTM-6123.

F. ENVELOPE FABRICATION SHALL BE IAW SPECIFICATION MIL-DTL-6060. MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BARRIER AT THE MOUNTING LOCATION USING MMM-A-260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A SUFFICIENT QUANTITY OF

ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE AIRTIGHT SEAL.

G. CLOSURE: CLOSE CONTAINER ACCORDING TO THE APPLICABLE CONTAINER SPECIFICATION (ASTM-

D6880).

H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

I. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ONE SIDE WITH MINIMUM ½ INCH HIGH BLACK LETTERS “REUSABLE CONTAINER, DO NOT DESTROY”. IN ADDITION, THE TOP SHALL BE MARKED “REMOVE (LAG BOLTS OR SCREWS) TO OPEN CONTAINER”, USING MINIMUM ½ INCH HIGH BLACK LETTERS.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 22 ooff 33

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 AK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

9258608 (3PSD7) HOUSING, MECHANICAL 19207 AK15845302

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-584-5302 9/27/2010

ITEM SIZE QTY ADDITIONAL NOTES REFERENCE

A 2 X 6 X 25 10 BLOCKING SEE ABOVE AND PAGE 3

B 60 X 110 ENVELOPE 1 MIL-PRF-131 MATERIAL SEE ABOVE AND PAGE 3

C 30 X 30 GASKET 2 IAW MIL-DTL-6060E SEE ABOVE AND PAGE 3

D 5/8 X 15 HARDWARE SET 2

HARDWARE SET CONSISTS OF:

1 PC 5/8 X 15 CARRIAGE BOLT, 1PC

5/8 LOCK WASHER, 1PC 5/8 FLAT

WASHER, AND 1PC 5/8 NUT

SEE ABOVE

18 X 72 X ¼ CUSHIONING 1 A-A59135, CLASS 1, GRADE A NOT PICTURED

30 X 30 BARRIER 1 MIL-PRF-121, TYPE II NOT PICTURED

1 X 10 X 33 4 CRATE NOT PICTURED

1 X 4 X 16-3/4 4 CRATE NOT PICTURED

1 X 4 X 23 2 CRATE NOT PICTURED

1 X 4 X 26 6 CRATE NOT PICTURED

1 X 4 X 27-7/8 2 CRATE NOT PICTURED

1 X 4 X 31-1/2 1 CRATE NOT PICTURED

1 X 6 X 27-7/8 8 CRATE NOT PICTURED

1 X 6 X 31-1/2 4 CRATE NOT PICTURED

1 X 6 X 33 7 CRATE NOT PICTURED

4 X 4 X 27-1/2 3 CRATE NOT PICTURED

2 X 6 X 25 10 CRATE NOT PICTURED

ITEM “D” ITEM “B”

ITEM “C”

ITEM “C”

ITEM “A”

ITEM “A”

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 33 ooff 33

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 AK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

9258608 (3PSD7) HOUSING, MECHANICAL 19207 AK15845302

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-584-5302 9/27/2010

CRATE BASE GASKET (ITEM C)

BLOCKING (ITEM A)

FOIL ENVELOPE (ITEM B)

ALL HOLES ARE 5/8” DIAMETER