SPI_AK15803591_REV-A-17MAY2023.pdf
PDF 353 KB Posted
- Attached to
- STEERING GEAR Federal contract opportunity
- Solicitation number
- SPRDL124R0069
About this file
This document is a Special Packaging Instruction (DD Form 2169) for a Steering Gear, Master with National Stock Number 2530-01-580-3591. The packaging requirements include preservative application, cushioning, blocking/bracing, and container specifications. The item has a CAGE Code of 45152 and a part number of 3847755.
The related federal contract opportunity is for a 5-year Indefinite Delivery Indefinite Quantity (IDIQ) contract to procure the Steering Gear. The supply source is restricted to CAGE Code 75Q65 - Oshkosh Defense. The solicitation number is SPRDL124R0069, with a minimum 5-year quantity of 39 each and a maximum 5-year quantity of 975 each. The solicitation close date is August 5, 2024. The agency issuing the solicitation is the Defense Logistics Agency Land and Maritime.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL124R0069-0002.pdf | ||
| SPRDL124R0069.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved
OMB No. 0704-0188 -BK
SW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3847755 (45152) STEERING GEAR, MASTER 19207 AK15803591
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2530-01-580-3591 5/17/2023
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 208.5 6.909 28.0 X 20.5 X 20.8
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1E, METHOD 43
13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-16173, GR 4
MIL-STD-2073-1E 2-C 1 CUSHIONING: A-A-59135, CL 1, GR A
14. DRYING SIZE:108 X 12 X 1/4-INCH THICK
MIL-STD-2073-1E 3-D 11 BLOCKING/BRACING: ASTM-D6199
15. PACKING
4-E 1 ENVELOPE: MIL-DTL-6060E, SIZE: 73 X 43
5-F 1 CONTAINER: ASTM-D6880, CL 2, ST 7
a. LEVEL A SIZE: 25 X 19 X 15
MIL-STD-2073-1E & NOTE G
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1E. INSPECT
THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER
SPECIFICATION.
B. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
C. WRAP ITEM IN FOAM AND SECURE USING TAPE.
D. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE PAGE 2-3 FOR SIZES AND ORIENTATION.
E. ENVELOPE FABRICATION SHALL BE IN ACCORDANCE WITH SPECIFICATION MIL-DTL-6060. MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BARRIER AT THE MOUNTING LOCATION USING MMM-
A-260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A
SUFFICIENT QUANTITY OF ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE
AIRTIGHT SEAL.
F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D6880 USING 5/16” X 3” LAG SCREWS FASTENED
INTO SKID MEMBERS.
G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
A
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 SW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3847755 (45152) STEERING GEAR, MASTER 19207 AK15803591
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2530-01-580-3591 5/17/2023
17. NOTES/DRAWING
ITEM SIZE QTY DESCRIPTION
A 21 X 14-3/4 X ½ PLYWOOD 1 A-A-55057
B 1 X 8 X 14-3/4 2 ASTM-D6199
C 2 X 4 X 7-1/4 4 ASTM-D6199
D 7-1/4 X 14-3/4 X ½ PLYWOOD 2 A-A-55057
E 2 X 8 X 14-3/4 2 ASTM-D6199
F 1/2" X 13” HARDWARE SET 4
HARDWARE SET CONSISTS OF: 1PC ½” X 13”
CARRIAGE BOLT, 1PC ½” FLAT WASHER, 1PC ½”
LOCK WASHER & 1PC ½” NUT
G 73 X 43 ENVELOPE 1 MIL-DTL-6060E
H 22 X 16 GASKET 2 MIL-DTL-6060E
I 25 X 19 X 15 1 ASTM-D6880, CL 2, ST 7
CRADLE ASSEMBLY HOLD-DOWN ASSEMBLY
G
H
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 SW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3847755 (45152) STEERING GEAR, MASTER 19207 AK15803591
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2530-01-580-3591 5/17/2023
17. NOTES/DRAWING
A
B
C
D
E
CRADLE ASSEMBLY
HOLD-DOWN
ASSEMBLIES
BASE WITH 2X DECKING
NOTE: ALL HOLES ARE ½” DIAMETER
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
File details come from the government source that posted it. Updated .