SPI-AK15720890.pdf

PDF 596 KB Posted Sep 4, 2024

Attached to: Winch Drum, Vehicle Mounting Federal contract opportunity
Solicitation number: SPRDL124R0107
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Sep 4, 2024

This document is a Special Packaging Instruction (SPI) for a 45,000 lb winch (NSN 2590-01-572-0890) produced by CAGE 53642. The SPI provides detailed instructions for the military preservation, cleaning, drying, packing, marking, and other requirements for this item. It specifies the use of various materials and construction methods per relevant military and industry standards. The SPI is associated with a federal contract opportunity issued by the Defense Logistics Agency Land and Maritime for a Winch Drum, Vehicle Mounting (Solicitation Number SPRDL124R0107). The SPI contains information necessary for properly packaging and preparing this item for delivery under the contract.

View the file

Other files for this federal contract opportunity

Other files attached to Winch Drum, Vehicle Mounting, newest first.
File	Type	Posted
SPRDL1-24-R-0107.pdf	PDF	Sep 4, 2024

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

53642 (0EJ14) WINCH 45K 19207 AK15720890

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-01-572-0890 3/16/2009 -

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 1795.0 60.966 54.3 X 53.3 X 36.4

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1D, METHOD 20

13. CLEANING 1-C CAPS/PLUGS: NAS 847

MIL-STD-2073-1D & NOTE B 2-D 3 BARRIER: MIL-PRF-121, TY II,

14. DRYING SIZE: 1PC 36 X 48, 2PCS 12 X 16

MIL-STD-2073-1D & NOTE B 3-E BLOCKING AND BRACING: ASTM-D6199

15. PACKING

4-F 1 CONTAINER: ASTM-D6256, TY II, CL 2, ST A

SIZE: 52 X 51 X 30-1/4

a. LEVEL A

MIL-STD-2073-1D & NOTE G

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 & NOTE H

17. NOTES/DRAWING

A. INSPECT PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1D

AND THE APPLICABLE CONTAINER SPECIFICATION.

B. CLEAN AND DRY ITEMS BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS

C. SEAL OPENINGS TO HOSES AND GREASE (ZERK) FITTINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.

D. COVER ASSEMBLY #1 WITH 36 X 48 PAPER TO PREVENT WINCH FROM CONTACT WITH LUMBER. WRAP

HOLD-DOWNS WITH 12 X 16 PAPER TO PREVENT WINCH FROM CONTACT WITH LUMBER.

E. SEE PAGES 2 THROUGH 4.

F. CLOSURE: CLOSE CONTAINER ACCORDING TO THE APPLICABLE CONTAINER SPECIFICATION.

G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

H. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ONE SIDE WITH MINIMUM ½ INCH HIGH BLACK LETTERS “REUSABLE CONTAINER, DO NOT DESTROY”. IN ADDITION, THE TOP SHALL BE MARKED “REMOVE (LAG BOLTS OR SCREWS) TO OPEN CONTAINER”, USING MINIMUM ½ INCH HIGH BLACK LETTERS.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 SW

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

53642 (0EJ14) WINCH 45K 19207 AK15720890

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-01-572-0890 3/16/2009 -

NOTE:

BLOCKING AND BRACING MEMBERS SHALL CONFORM TO ASTM D6199.

ASSEMBLY #2 AND #3 SHALL BE SECURED TO THE INTERIOR OF THE SHELL OF THE CONTAINER WITH

NAILS/ STAPLES CONFORMING TO ASTM-F1667.

ALL HARDWARE AND CONSTRUCTION SHALL BE ACCORDING TO ASTM-D6256.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 4 Pages

AASSSSEEMMBBLLYY ##11

AASSSSEEMMBBLLYY ##22

AASSSSEEMMBBLLYY ##33

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

53642 (0EJ14) WINCH 45K 19207 AK15720890

BASE WITH ASSEMBLY #1 (TOP VIEW)

ASSEMBLY #1 CONSISTS OF: NOTE: ALL LUMBER SIZES ARE NOMINAL

2 EACH- ITEM A

2 EACH- ITEM B

CUT LIST FOR BLOCKING, BRACING, BUILD-UPS, AND HOLD DOWNS:

ITEM QTY SIZE ADDITIONAL NOTES:

A 2 2 X 10 X 24 B 2 2 X 6 X 52 C 4 2 X 4 X 24-3/4 D 8 2 X 4 X 10 E 2 4 X 4 X 51

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 4 Pages

AA AA

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

53642 (0EJ14) WINCH 45K 19207 AK15720890

ASSEMBLY #2 CONSISTS OF: ASSEMBLY #3 CONSISTS OF:

2 EACH- ITEM C 1 EACH- ITEM C

4 EACH- ITEM D 4 EACH- ITEM D

PLACE AS SHOWN PLACE AS SHOWN

NOTE: SECURE BLOCKING TO INTERIOR OF PANELS USING NAILS/STAPLES CONFORMING TO

ASTM-F1667.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 4 of 4 Pages

File details come from the government source that posted it. Updated Sep 4, 2024.