SPI AK12079240_F.pdf
PDF 132 KB Posted
- Attached to
- Cylinder, Hydraulic, Actuating
- Solicitation number
- SPRDL1-26-R-0104
About this file
This document is a DD Form 2169 (Special Packaging Instruction) dated 5/5/2026 for a Cylinder Assembly (Part No. 6-372-002270, NSN 3040-01-2079240) manufactured by Weatheris.
The packaging instructions specify detailed requirements for preservation, cleaning, drying, packing, and marking of the cylinder assembly. The item must be cleaned and dried before packaging, then filled with manufacturer-recommended lubricant with cylinder rods fully retracted and excess drained. All openings must be sealed with appropriate caps/plugs (NAS847). The exterior surfaces require application of preservative (MIL-PRF-16173, Grade 4) to all unpainted/unplated areas. Wrapping must comply with MIL-PRF-121, Type I, and the item must be packed in a container meeting ASTM-D6880 Class 2, Style 1 specifications (30-1/2 X 8-1/4 X 5-1/8 inches) constructed of 1-inch nominal lumber with 2-inch nominal lumber ends. Blocking and bracing must follow ASTM-D6199 standards, be secured with nails/staples conforming to FF-N-105, and use materials between contact points. The unit pack weighs 80.0 pounds with a volume of 1.200 cubic feet. Inspection, preservation, unit pack, and packing must conform to MIL-STD-2073-1E and MIL-STD-129, with Method 20 preservation employed. Level A packing applies; Level B marking is not applicable.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL1-26-R-0104 solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-2079240
AK12079240
F
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION5. DATE
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION
6-372-002270 (12361) CYLINDER ASSY 19207
A. INSPECT PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1E AND THE APPLICABLE
CONTAINER SPECIFICATION.
B. CLEAN AND DRY ITEMS BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.
C. WITH CYLINDER RODS FULLY RETRACTED, FILL WITH MANUFACTURER'S RECOMMENDED LUBRICANT AND
THOUROUGHLY DRAIN EXCESS.
D. SEAL ALL OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. APPLY PRESERVATIVE TO ALL UNPAINTED/UNPLATED EXTERIOR SURFACES.
F. APPLY MATERIAL BETWEEN POINTS OF CONTACT OF ITEM WITH BLOCKING OR CONTAINER.
G. SEE PAGE 2 FOR CONSTRUCTION AND PLACEMENT OF BLOCKING/BRACING.
H. BOX SHALL BE CONSTRUCTED OF 1" NOMINAL LUMBER WITH 2" NOMINAL LUMBER ENDS AND NO END CLEATS
REQUIRED.
I. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
1 EACH NONE
MIL-STD-2073-1E, METHOD 20
MIL-STD-2073-1E AND NOTE B
MIL-STD-2073-1E AND NOTE B
10. UNIT PACK CU. (CU. FT.)
1.200
11. UNIT PACK SIZE (IN)
12. MILITARY PRESERVATION
17. NOTES / DRAWING
15. PACKING
14. DRYING
13. CLEANING
7. QUP 8. ICQ 9. UNIT PACK WT. (LB)
80.0 20.
DESCRIPTION
18.
STEPS
19.
REQ'D
MIL-STD-2073-1E AND NOTE I
NOT APPLICABLE
MIL-STD-129
033.4 009.7 006.6X X
b. LEVEL B
16. MARKING
a. LEVEL A
1C 2D 3E 4F 5G 6H
A/R A/R A/R A/R
PRESERVATIVE: SEE NOTES
CAPS/PLUGS: NAS847
PRESERVATIVE: MIL-PRF-16173, GR 4
WRAP: MIL-PRF-121, TY I, SIZE A/R.
BLOCKING AND BRACING: ASTM-D6199
CONTAINER: ASTM-D6880, CL 2, ST 1,
SIZE 30-1/2 X 8-1/4 X 5-1/8
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
5/5/2026
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-2079240
AK12079240
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION5. DATE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
6-372-002270 (12361) CYLINDER ASSY 19207
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
5/5/2026 F
File details come from the government source that posted it. Updated .