SPI 118.pdf

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K7321 (19207) DIGITAL PROCESSING CARD WITH CONTAINER 19207 AK16747136

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

5998-01-674-7136 01/16/2019 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 18.8 1.902 17.6 X 16.1 X 11.6

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 54 1B 1 CONTAINER P/N: 19980-1801

13. CLEANING (DESIGN P/N: 19980-1800)

MIL-STD-2073-1

14. DRYING 2C 1 BAG: MIL-DTL-117, TYPE I, CLASS F, STYLE 1,

MIL-STD-2073-1 SIZE: 10 X 13

15. PACKING 3E 3 DESICCANT: MIL-D-3464, TYPE II

a. LEVEL A UNITS

MIL-STD-2073-1 AND NOTE H

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 AND NOTE G

17. NOTES / DRAWING

57K7321 CONSISTS OF: 1EA. DPC, P/N: 12591893 AND 1 EA. REUSABLE CONTAINER P/N: 19980-1801.

A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.

B. PACKAGING OF THIS ESD SENSITIVE ITEM MUST BE ACCOMPLISHED AT AN ESD PROTECTED AREA IN

ACCORDANCE WITH MIL-STD-1686.

C. THE BAG IS TO BE OF ONE PIECE CONSTRUCTION. DO NOT MECHANICALLY EVACUATE. PLACE PART IN

BAG AND CLOSE WITH TAPE.

D. OPEN ALL LATCHES ON THE CONTAINER AND REMOVE THE LID. PLACE THE BAGGED PART INTO THE

CONTAINER AS SHOWN ON PAGE 2.

E. PLACE 3 UNITS OF DESICCANT INTO THE SMALL RECTANGULAR CAVITY IN THE TOP FOAM.

F. REPLACE THE CONTAINER LID AND SECURE ALL LATCHES.

G. MARKING:

1. THE FOLLOWING FIELDS SHALL BE COMPLETED ON THE CONTAINER IDENTIFICATION PLATE:

a. ITEM WITH CONTAINR P/N

b. NOMENCLATURE

c. ITEM WITH CONTAINER NSN

d. CONTAINER P/N

2. ADDITIONAL MARKING SHALL HAVE THE SENSITIVE ELECTRONIC DEVICE SYMBOL AND THE ASSOCIATED

CAUTION LABEL EMPLOYED AS IT IS SPECIFED IN MIL-STD-129 ON THE UNIT PACK.

H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

I. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-1

AND THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

19980-1801 CONTAINER

(19980-1800 DESIGN)

12591893

PART

POCKET FOR

DESICCANT

NOTE: BAG ON PART

IS NOT SHOWN

57K7321 ASSEMBLY

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K7321 (19207) DIGITAL PROCESSING CARD WITH CONTAINER 19207 AK16747136

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

5998-01-674-7136 01/16/2019 -