Specs_for_2000_Gallon_2_Compartment_Fish_Transport_Inks_Dam.pdf
PDF 134 KB Posted
- Attached to
- TX INKS DAM NFH FISH TRANSPORT Federal contract opportunity
- Solicitation number
- 140FS225Q0041
About this file
This document is a detailed technical specification for a trailer-mounted 2,000-gallon fish transport tank system required by the USFWS Inks Dam National Fish Hatchery in Burnet, Texas.
The system consists of two 1,000-gallon compartment tanks constructed with 0.25" thick 5052 aluminum inner tanks and 3/16" fiberglass outer layer with gelcoat exterior. Key features include 12" diameter Valterra knife gate outlets, 2" diameter tempering valves, aluminum door hatches with safety features, PVC plumbing for oxygen systems, Fresh Flo Model TT Aerators (4 total), Point Four Microbubble diffusers (6 total), and a YSI-IQ SensorNet 2020 3G in-cab monitoring system. The tank system is mounted on a 24' gooseneck steel deck-over trailer with dual 15k axles, electric over hydraulic disc brakes, auxiliary lighting, and custom features including oxygen bottle racks, dip net rack, and underbed storage boxes. The complete system must be delivered fully assembled to Inks Dam National Fish Hatchery at 345 Clay Young Road, Burnet, Texas 78611.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140FS225Q0041.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
140FS225Q0041 Regional Fish Transport System Page 1 of 2 Inks Dam National Fish Hatchery
USFWS Inks Dam National Fish Hatchery has a requirement for a trailer mounted 2,000-gallon fish transport tank system. The tank will consist of two (2) 1,000-gallon compartment insulated fiberglass and aluminum fish tanks with the following features and construction characteristics:
• 0.25” thick 5052 Aluminum inner tank, tank structure in same material
• (2) compartments, 0.25” thick 5052 Aluminum divider walls in between each compartment
• 3/16” fiberglass outer layer, gelcoat exterior with clear coat for ease of cleaning
• (2) 12” diameter Valterra knife gate outlets (or equivalent) o Custom aluminum mounting plate o 12” flanged connection to trailer plumbing o Single 12” male ring-lock fitting at back of trailer
• 2” diameter tempering valve on bottom of tank (2) o Valterra 2” knife gate valve (or equivalent) integrated with inner aluminum tank (CNC plate) o Internally screened, screwed in places with flathead screws
• (2) large top aluminum door hatches for easy access o Top hatch hinge direction TBD o 3” stainless steel hinges o Top door latches, secured with 500# stainless steel toggle clamps o ½” seal, foam rubber with self-adhesive o Stainless steel gas shock door control (base mounted on door frame sidewall) o Vent scoop
▪ 3” PVC pipe stub for PVC elbow vent
• PVC plumbing routing within tank walls for Oxygen system:
o Typ. 1” Sch 40 PVC piping o Plumbing for oxygen system, internal to tank construction
• (4) Fresh Flo Model TT Aerators (or equivalent), (2) per compartment.
o Set up for salt water (SS bearings) o All wet-rated conduit, receptacles, boxes, etc.
• (6) 24” Point Four Microbubble diffusers (or equivalent), (2) per compartment recessed into tank floor o ¼” valve pocket drains o (1) Oxygen flow meter per stone (Western Enterprises FME102 or equivalent) o (3) Western Enterprises oxygen regulators (or equivalent)
• Lifting eye on rear of tank for chain to support the discharge pipe
• YSI – IQ SensorNet 2020 3G (or equivalent) in-cab monitoring system with wireless communication o PVC conduit ran inside tank wall for sensor wire routing o Installation of all necessary parts on trailer with additional wiring o All necessary items for installing in-cab monitoring in truck less labor for installation
Trailer: 24’ steel deck-over trailer with 2ea 30k weight rating
• 24’ Gooseneck steel trailer setup with (2) 15k axles
• Spare tire
• Aluminum extruded metal serrated top bar grating walking platform around tank
• Folding ladder off side of trailer aligning with handrail on side of tank for safety access
• Custom modified for 12” plumbing with rear discharge
• Custom oxygen bottle rack to accommodate 2 oxygen bottles
• Custom dip net rack
• (4) KC Pro 6” lights (or equivalent) for auxiliary light at all four corners of trailer
• (3) underbed truck boxes (locations to be determined)
• Upgraded to (2) 12k electric over hydraulic disc brakes
• Upgraded to dual 12k hydraulic jacks
140FS225Q0041 Regional Fish Transport System Page 2 of 2 Inks Dam National Fish Hatchery
Total assembled package to be delivered to Inks Dam, Burnett TX located at 345 Clay Young Road, Burnet, Texas 78611.
File details come from the government source that posted it. Updated .